Konstruktionsingeniør Jobs

purchased a set of plans online and the plans need some modification engineering. We have permission to modify the plans to my specifications. We am building in Kingman, AZ in Mohave County. Is this something you can help me with? Can you please let us know a rough estimate on pricing.

I need a Professional Engineer registered in Alberta to take full responsibility for the structural design of a new industrial-use steel building. Your scope begins with load calculations—live load, dead load and significant equipment loads—and ends with permit-ready, PE-stamped drawings and a supporting calculation package. All analysis and detailing must satisfy the latest National Building Code of Canada, the current Alberta Building Code and any applicable provincial or municipal bylaws, along with the usual CSA S16 / S136 steel provisions. Please use whichever mainstream structural tools you are most comfortable with (STAAD, SAP2000, ETABS, Tekla Structures, etc.), provided the final files are reproducible if the authority requests them. Acceptance criteria • Signed...

I need a licensed structural engineer to put together a full set of permit-ready drawings and member sizing for a 20' × 40' single-story steel garage. The local building department is the ultimate audience, so everything has to satisfy our local building codes in both notation and calculation summaries. The scope is limited to the superstructure: columns, rafters, girts, purlins, connection details, bracing, roof and wall cladding schedules, plus any lateral design notes the reviewer will expect. I do not require detailed foundation plans—slab and footing design will be handled separately—so please show only the minimum footing references needed for clarity. Deliverables I expect: • Signed and sealed PDF drawing set (plan, elevations, sections, conn...

I need a Professional Engineer registered in Alberta to take full responsibility for the structural design of a new industrial-use steel building. Your scope begins with load calculations—live load, dead load and significant equipment loads—and ends with permit-ready, PE-stamped drawings and a supporting calculation package. All analysis and detailing must satisfy the latest National Building Code of Canada, the current Alberta Building Code and any applicable provincial or municipal bylaws, along with the usual CSA S16 / S136 steel provisions. Please use whichever mainstream structural tools you are most comfortable with (STAAD, SAP2000, ETABS, Tekla Structures, etc.), provided the final files are reproducible if the authority requests them. Acceptance criteria • Signed...

I’m coordinating the C&I / electrical works for the crusher section of a cement plant in India and need hands-on help finalising both the design and field execution of the cable tray system. Scope of work – Produce a clean, clash-free layout that shows every tray run, drop, and support detail around the crusher and its auxiliaries. – Supervise or directly carry out the physical installation to be sure the trays follow the approved drawings. – Generate all associated documentation: the complete IO list, updated JB schedule, and clear wiring diagrams. – Issue a cable schedule that lists, for every run, the cable type and size, exact cut length, and confirmed routing path. Deliverables (to close the job) 1. CAD drawings (DWG/PDF) covering plan, el...

I need a structural engineer to validate and provide documentation for a city permit. This is to confirm that an office wall can support a ventilation hood I am installing. Requirements: - Validate structural integrity of wall - Provide engineer's stamped letter for city permit - Review existing blueprints and measurements Ideal skills and experience: - Licensed structural engineer - Experience with similar permit documentation - Ability to assess provided floorplans and measurements

Our village still relies on a single shallow borehole and the contamination there has led to frequent water-borne illnesses. We have already mobilised local volunteers and raised USD 1,600 to cover cement, bricks, water pipes, sand and the wages of on-site workers. What we lack is a seasoned professional who can take full ownership of project management and make sure the new protected well is delivered on time, on budget and—with laboratory confirmation—safe to drink. Here is what I will need from you: • A clear work plan with milestones, material quantities and a cost breakdown that fits the USD 1,600 we have in hand. • Coordination of purchasing and transport of cement, bricks, pipes and sand from nearby suppliers. • Day-to-day supervision of the digging...

I am a licensed Land Surveyor and need a CAD drafter to create boundary survey plats. There are also projects for other types of surveys if you have familiarity with topographic survey plat requirements. You will use provided survey points and property research to create a plat that meets Georgia state standards as well as county/city requirements when applicable. Being based out of the metro Atlanta area is a slight bonus, but this will be entirely remote. Typical Deliverables: - boundary survey plat meeting state and local requirements to be recorded. Ideal Skills & Experience: - Proficiency in CAD software, AutoCAD preferred but anything that can produce the deliverables in DWG format is acceptable. - Experience with boundary surveys (experience with ALTA/NSPS survey is a plus) -...

I’m preparing to move my residential building project from concept to reality and need an experienced structural engineer to take charge of the full design and analysis during this planning phase. Your role will be to translate the architectural intent into a safe, code-compliant structural system, delivering all calculations and documentation required for permitting and construction. Key deliverables I will be looking for: • Complete structural drawings (foundation, framing, roof, connections) in CAD/PDF • Load calculations and analysis reports that satisfy local building codes • A concise design brief outlining chosen materials, assumptions, and design criteria • One revision cycle after I review the initial package with my architect I’m happy to s...

I need a dependable sourcing partner on the ground in China to secure construction-grade materials for an upcoming project. The work centres on: • Finding verified, compliant manufacturers that can meet my technical specs and volume targets • Negotiating pricing, MOQs and contract terms to lock in the best total landed cost • Arranging product samples, overseeing pre-shipment quality inspections and sending me clear inspection reports • Coordinating logistics, shipping and all customs documentation so the goods reach my warehouse without delays You’ll receive my detailed bill of materials and target markets once we begin. Please outline your relevant experience with construction materials sourcing, including any success stories or brands you have support...

I have a 140 × 54 ft heavy-timber framed home already engineered; the full structural package is in hand and ready to share, including floorplan and elevations for every space. I need them tied seamlessly to a construction-ready Mechanical, Electrical, and Plumbing design. I am primarily building with SIP's and ICF's, so there will be a strict limitation on the number of penetrations between the interior and exterior envelope. Scope • Generate detailed MEP plans (sizing, routing, schedules, panel layouts, fixture counts, equipment specs) sufficient for bids and field installation. All work should conform to current state of Washington, Whatcom County, and City of Blaine codes. Deliverables I’ll supply the structural drawings in PDF format. You will return a coo...

I need a qualified civil engineer to turn my existing, fully-detailed residential plans into precise EPS (polystyrene) shop drawings for the concrete grade beams. Your drawings must show the exact dimensions and layout of every block so the installer can drop the EPS into the wooden formwork without on-site trimming or guesswork. I will supply the architectural and structural PDFs/DWGs as soon as we start; you translate that information into coordinated EPS drawings (CAD and print-ready PDF). The finished set should align perfectly with beam reinforcement and formwork tolerances, clearly call out block thicknesses, and flag any clashes you detect. Deliverables • Complete EPS shop drawings (DWG + PDF) covering all grade beams • A short coordination note highlightin...

I need an expert to check the requirements for underpinning a stable concrete retaining wall that is 3 to 6 feet high. Key requirements: - Assess the need for underpinning - Evaluate stability and safety - Recommend materials and techniques Ideal skills and experience: - Civil engineering background - Experience with retaining walls I would like a structural engineers reports on a retaining wall. - Knowledge of underpinning methods

I have an initial budget study for a resort that needs to be torn down and rebuilt from the numbers up. The refreshed estimate must embrace every major zone of the property—Accommodation, Dining facilities, Recreational areas, and the Swimming pool—and speak to today’s material and labour realities as well as current building codes. Accommodation is the heaviest focus. Only NEW constructions are on the table and they will take the form of villas or cottages, not hotel rooms or suites. I need a clear, line-item cost breakdown that covers structural work, MEP, finishes, FF&E, permitting, and contingency, together with a concise narrative that explains the quantity assumptions and unit rates you used. Dining venues, recreation hubs and the pool area should follow the sa...