Will the infotainment brick if you listen to NPR?

Or will it just freeze if you listen to 99% Invisible?

Between the what Mazda handled both of those issues and basically telling people to Pound Sand, I’m not sure I would want to get an even more software driven Mazda.

All two dongles I have used (Google, Apple) have a DAC.

I’m pretty sure the analog ones are the exception, not the rule.

Ah yes the BTTF Framing Fiasco!

I remember waiting like 2+ months for my fixed DVD to get mailed.

I’ve honestly had a lot of luck booting a Windows SSD on different computers.

The Xperia 10 mk7 has all of that for a fraction of the price.

Just like the Xperia 1 you can’t officially get them in North America.

I’m not sure which specific issue you are referring too, but personally I had HW transcoding break with the new version and also direct play seem to also break with the newest Android TV version. Nothing with HDR would play at all, despite using an Nvidia Shield.

I rolled back both since I couldn’t find anyone with similar issues.

Yeah their first two dedicated EV cars(for NAR anyways), ex30 and ex90, are pretty hated by most reviewers.

I thought my Asus G14 looked pretty normal.

Unfortunately it was a complete POS that never slept correctly or would randomly used the Nvidia GPU leading to like 2-3 hour battery life.

ThinkPad + Steamdeck is my new solution.

I flashed to mainline shortly after getting it. I didn’t have any issues with stock firmware, only swapped because if the cartographer.

If you don’t mind minor amounts of tinkering to get it good, it’s been great since switching to the Cartographer.

Terrible bed adhesive. Cleaned the bed multiple times. Tried with and without glue sticks. It had over 2mm of deviation.

Prints would always warp on the right side where the aux fan was blowing on them.

I had a K1 Max I got directly from Creality in October.

It would print ASA okay, but PETG and PLA failed like 75% of the time.

Switched to a Sovol SV08 with a cartographer and I can’t remember having a failed print since. I print almost exclusively in PETG now.

Tailscale is Canadian

https://en.m.wikipedia.org/wiki/Tailscale

BRP was separate from Bombardier since 2003.

Just looked it up, BRP was sold off from Bombardier in 2003…

This Bombardier doesn’t have dealerships.

They made aircrafts and they haven’t had anything to do with BRP for like 12 years 23 years and sold off the transportation (rail) division about 5 years ago.

Just so no one else gets confused here.

A pi-hole can not block YouTube ads. You need ublock(origin) extension or SmartTube for Android to block YouTube ads.

I dislike this vehicle as much as the rest.

But gluing panels one is normal. Windshields have been glued in for forever.

Panels on LRVs and Buses are glued on.

There is nothing wrong with the concept of gluing panels on.

I have had a SV08 for a few weeks. Had a K1 Max for the same time period. I had 2 or two failed prints on the SV08 and about 3 dozen failed prints.

I returned the K1 Max (with huge struggles with support)

Previously I had a Labist ET4 that only worked for a out 5 prints total before giving up on it.

I will agree with your statement. If you are willing to put in a bit of research on YouTube and GITHUB and swap a few parts and spend a few hours you’ll have a hilarious large printer that just spits out almost anything you throw at it, besides ABS and ASA… For now…

But a 135 QR 29er wheel isn’t that special, so finding one that wasn’t either a junk hub or $600 hub shouldn’t have been an issue. Even finding TA non boost wheels is becoming difficult.

I ended up finding a lightly used Nukeproof wheel for around $100.

Thankfully the fork on that same bike is just using off the shelf SRAM parts.

Except if they change BB or axle spacing standards, which seems to be happening every few years.

I struggled to find a half decent 135 QR 29er wheel last year for my Trek Xcaliber. A nearly $2000CDN bike from 2016 with nothing wrong except the free hub, and everywhere told me to just get a new bike.

I like my bikes, but I really hate the people running the industry.