• 57 Posts
  • 393 Comments
Joined 2 years ago
cake
Cake day: June 23rd, 2024

help-circle



  • Man muss wirklich höllisch aufpassen.

    Habe letztes Jahr mal spontan Konzertkarten gesucht, da war schon viel Scam dabei. Habe aber letztlich dann welche bekommen. Persönliche Übergabe, bar bezahlt, netter Kontakt.

    Vor ~10 Jahren habe ich einmal die komplette Möblierung eines Hauses dort verkauft. Dabei gab es zwar keine Scamversuche, aber so etwa bei jedem 3ten bis 4ten Verkaufsversuch wurde man versetzt und hat umsonst gewartet. Sehr viele waren verspätet. Das war schon nervig, weil ich immer eine Anfahrt hatte.

    Bin dazu übergangen alles was irgendwie nach Bot oder low-effort klingt zu ignorieren. “Was letzte Preis” / “Noch da” ohne Hallo usw. -> wird blockiert. Damit filtert man vielleicht zu grob, aber es funktioniert für mich ganz gut.






  • Sehe ich auch so.

    Ich habe so ein bisschen den Eindruck, dass dieses strikte Einordnen-wollen von Themen in Communities eine Art Relikt aus der “Foren-Zeit” ist.

    Aber bei der überschaulichen Anzahl der Beiträge finde ich das absolut fehl am Platz. Denn dann wird halt an 3 Stellen unabhängig voneinander diskutiert, weil ein Thema für mehrere - aber leere - Communities relevant ist. Und dann kriegt man über den “lokal”-Feed vielleicht einen dieser Posts zu sehen. Vielleicht auch alle 3 oder keinen.
    Und wenn man dann nicht auf feddit.org ansässig ist, kriegt man es als nicht-Abonnent dieser Communities nur mit, wenn ein Beitrag richtig stark diskutiert wird.

    Im Moment wäre es vielleicht nicht schlecht, wenn es irgendeine Art von Tags oder sowas für Posts gäbe. Dann könnten die Leute vllt Uninteressantes herausfiltern, es wäre aber nicht alles so verdammt fragmentiert.


  • I don’t think the manufacturer will publish those numbers.

    On the peri-website, there are some numbers relating to printing-speed, layer-thickness and -width and setup-times (english / german). With those one could calculate approximately how long it could take to print a certain building in optimal conditions.

    More than that you will probably not get out of them.

    Unfortunately, I couldn’t really find more information. All results of a web search about this project in this state seem to be the same press statement almost copied verbatim.

    My comment was no dig at you for choosing that article. 3d-printing is kind of interesting and with the scale of printers needed here, there will not be a lot of independent information very soon.

    But I’m glad there is some public focus on construction methods, even if the “recent” developments in construction that I personally think are good for future-proofing the industry and reducing CO2-emissions (like increased use of prefabrication even on smaller scales and more use of wood on larger scales (e.g. cross-laminated-timber) are not that “interesting” to the public.






  • As a civil engineer I see the whole 3d-printing-buildings-thing mostly as a gimmick and a way to grab some research-money to co-finance your building. At least at the moment.

    In this case they still added timber-framing above the concrete walls and as interior walls and roof, so one couls ask why they wouldn’t build the whole walls as timber frame. That would be faster for sure.

    But of course not every building has to be built fast or cheap. There are other valid criteria…

    And it’s ok to try to find new ways to build walls - even if thats a part of construction that can be done quite fast & efficient already via prefabricating.

    Concerning the article:

    The author seem to have taken the press-statement from the 3d-printing-company and subtracted some pictures and the metric units.
    Without transparency about costs per m² compared to other construction methods it is just an advert.