Mailman 3 June 2018 - POT

Barycentric Coordinates 2D Interpolation Problem
by Aruther5＠gmu.edu July 3, 2018

July 3, 2018

Hi, I am currently trying to use the bregman barycenter algorithm to interpolate between 2D floating point arrays. I am getting some odds results and was hoping to better understand what's happening. The example I've attached illustrates the main issue. In this example, I'm trying to interpolate between two 2D arrays, one with 1s in the upper-right quadrant, and 0s elsewhere, the other with 1s in the lower left quadrant, and 0s elsewhere. I'm then using barycenter with different weights ([1-t, t] for t in {0, 0.25, 0.5, 0.75, 1}). What I would have expected is that each output would have the same number of 1s, just in different locations. for t = 0, I'd expect to get my first input, for t = 1, my second input. For t=0.5, one quadrant's-worth of 1s at the center of the output image. Instead, the output I'm getting is fuzzy, and also significantly offset from where I'd expect for all t other than 0.5. At the very least, I can't imaging why I would get anything other than my original input for t = 0 or 1. Do I misunderstand the function, or have I made an error somewhere? If anyone could help me to better understand what's happening here, I would appreciate it. Here the code I'm using: https://pastebin.com/EuW2sAUM And here's the output of the above code: https://imgur.com/a/H9AK9

3 2

Nearest Neighbor Classifier -OTDA
by Kowshik Thopalli June 27, 2018

June 27, 2018

Hello , I am following these two papers- Optimal Transport for Domain adaptation Courty et al in TPAMI [1] and Large scale OT and Mapping estimation -Seguey et al in ICLR[2] The papers say that they use Nearest Neighbor classifier as the baseline and I am confused about it. As in [1] I took 1800 Usps and 2000 MNIST dataset and using the OTDA examples found the transported source. I am struck after this for the classification i.e., do I now compute a 2000 X 1800 distance matrix between target and source and use nearest neighbors? Here is the code that I am using. Can you please tell me how to proceed from here ##% experiment with domain adaptation import ot import numpy as np import sklearn import matplotlib.pyplot as plt from scipy.io import loadmat #%% data u_m=loadmat('USPS_vs_MNIST.mat') Xs= u_m['X_src'] Ys=u_m['Y_src'] Xt=u_m['X_tar'] Yt=u_m['Y_tar'] #%% DA ot_sinkhorn_un = ot.da.SinkhornTransport(reg_e=1) ot_sinkhorn_un.fit(Xs=Xs.T, Xt=Xt.T) transp_Xs_sinkhorn_un = ot_sinkhorn_un.transform(Xs=Xs.T).T #%% nearest neigbor classifier from sklearn.metrics import confusion_matrix as CM import scipy M=scipy.spatial.distance.cdist(Xt.T,transp_Xs_sinkhorn_un.T,'sqeuclidean')# not correct a=np.argmin(M,axis=1) labels_test= Yt[a] conf= CM(Yt,labels_test) acc= np.sum(np.diag(conf))/np.sum(conf) acc

1 1

Fwd: Understanding 1-D barycenters in 1-D
by Kowshik Thopalli June 10, 2018

June 10, 2018

Hello, I am using the following modified code from the tutorial examples/plot_barycenter_1D.py. I have just modified it to compute barycenters between bimodal 1-D distributions. I expected to see the barycenter to also contain only two peaks however it contains 3 which is not very intuitive geometrically speaking . I have attached the resultant figure showing that the barycenter computed has three peaks. Is there a way to intuitively understand why this is happening. The results dont show this if weights computed using \alpha when \alpha = {0,0.1,0.8,0.9,1} Thanks Kowshik The code is here - https://pastebin.com/bgMgrBMd The result image is here- https://imgur.com/a/o3ptZ8U <https://imgur.com/a/o3ptZ8U> ᐧ

1 0

Understanding 1-D barycenters in 1-D
by Kowshik Thopalli June 10, 2018

June 10, 2018

Hello, I am using the following modified code from the tutorial examples/plot_barycenter_1D.py. I have just modified it to compute barycenters between bimodal 1-D distributions. I expected to see the barycenter to also contain only two peaks however it contains 3 which is not very intuitive geometrically speaking . I have attached the resultant figure showing that the barycenter computed has three peaks. Is there a way to intuitively understand why this is happening. The results dont show this if weights computed using \alpha when \alpha = {0,0.1,0.8,0.9,1} Thanks Kowshik import numpy as np import matplotlib.pylab as pl import ot # necessary for 3d plot even if not used from mpl_toolkits.mplot3d import Axes3D # noqa from matplotlib.collections import PolyCollection import os ############################################################################## # Generate data # ------------- #%% parameters n = 200 # nb bins # bin positions x = np.arange(n, dtype=np.float64) # Gaussian distributions a1 = ot.datasets.get_1D_gauss(n, m=10, s=5) # m= mean, s= std a2 = ot.datasets.get_1D_gauss(n, m=60, s=5) # creating matrix A - a bimodal distriution A = a1+0.5*a2 b1 = ot.datasets.get_1D_gauss(n, m=100, s=8) # m= mean, s= std b2 = ot.datasets.get_1D_gauss(n, m=150, s=8) # creating matrix B another bimodal B=0.5*b1+b2 distributions=np.vstack((A,B)).T n_distributions = distributions.shape[1] # loss matrix + normalization M =ot.dist(x.reshape(n,1),x.reshape(n,1),metric= 'sqeuclidean') M /= M.max() ############################################################################## # Plot data # --------- #%% plot the distributions pl.figure(1, figsize=(6.4, 3)) for i in range(n_distributions): pl.plot(x, distributions[:,i]) pl.title('Distributions') pl.tight_layout() ############################################################################## # Barycenter computation # ---------------------- #%% barycenter computation alpha = 0.5 # 0<=alpha<=1 weights = np.array([1 - alpha, alpha]) # l2bary bary_l2 = distributions.dot(weights) # wasserstein reg = 0.001 bary_wass = ot.bregman.barycenter(distributions, M, reg, weights) pl.figure(2) pl.clf() pl.subplot(2, 1, 1) for i in range(n_distributions): pl.plot(x, distributions[:, i]) pl.title('Distributions') pl.subplot(2, 1, 2) pl.plot(x, bary_l2, 'r', label='l2') pl.plot(x, bary_wass, 'g', label='Wasserstein') pl.legend() pl.title('Barycenters') pl.tight_layout()

1 0

Wasserstein Barycenters for more than 1-D distributions
by thopalli1＠llnl.gov June 5, 2018

June 5, 2018

Hi, Thanks for a great tool box. In the example as well in documentation – the method ot.bregman.barycenter(A,M..) calculates the entropic regularized wasserstein barycenter of distributions A where each column of A is considered a distribution implying – that it computes Barycenters for 1-D distributions. I want to ask if there is an easy way to extend this to more than 1-D distributions, say 2 or 3 or to arbitrary dimensions. I have read the convolutional Wasserstein distance paper by Solomon et al (SIGGRAPH 2015). I also want to ask if it will be implemented in this toolbox as well? Thanks Kowshik Thopalli

4 3