I've had two UAP AC AP Lite access points for 8 years now. After fooling with WiFi for so long before, Unifi was just a "set and forget" kind of solution. ...
Hello, everyone, recently I set up AmneziaWG on my router(Cudy WR3000 running openwrt) using this shell script. It works great, but currently it routes all traffic from my LAN through the VPN interface(awg1). But I want to somehow to achieve a split setup. I want first Wi-Fi, that routes everything AmneziaVPN and a second, that ...
So I was messing around a bit with nginx on my openwrt one router, nothing that should've affected uHTTPd but now I don't get redirected to the LuCI web interface from 192.168.1.1/ ...
I'm on a Raspberry Pi 4B. After updating to the latest firmware v25.12.0-rc2 I can't connect to the router/Pi. The WiFi on the Pi is disabled. I only connect through Ethernet. ...
I haven't used open wrt before and need to buy a comparable router. I'm also not sure if I might swap to ddWRT (and I'm not really sure what the difference is) ...
Hi all, I have a Netgear D7800 that I have run openwrt on for a long time. Does anyone else have one (or similar) and how do I get sysupgrades working? They error out when I upload a sysupgrade image, with an error about unsupported partition layout. ...
Go with me here. Routers are routers, and servers are servers. Some people mix and match things, but generally, ideally, this is how it goes. And I agree. ...
I am looking for anyone who is using OpenWrt with Orange or Jazztel Spain who might be able to help me figure out why after changing my router I can't get an Ipv6 allocated to my connection. #openwrt #Jazztel #orange #ipv6 #spain - I'd really appreciate any boosts to followers in spain who might be able to help - Its driving me ...
Hi all. Thanks for checking in. I've been looking at Routing Rules and Routes to try and solve a couple of problems but I keep screwing up and taking down my whole network (and I've never been more grateful for serial ports). ...
I think it was when I replaced my router with a new #BananapiR3 but my #openwrt v24 router has lost its #ipv6 connectivity from #Jazztel #fibre and I can't figure out why. - I have vague memories of something blocking it in the past (or did it just work when I connected it - I can't remember) but its annoying me now I have ...
Unifi devices aren't all that
I've had two UAP AC AP Lite access points for 8 years now. After fooling with WiFi for so long before, Unifi was just a "set and forget" kind of solution. ...
How to create a separate "Direct Internet" SSID alongside my AmneziaWG VPN setup?
Hello, everyone, recently I set up AmneziaWG on my router(Cudy WR3000 running openwrt) using this shell script. It works great, but currently it routes all traffic from my LAN through the VPN interface(awg1). But I want to somehow to achieve a split setup. I want first Wi-Fi, that routes everything AmneziaVPN and a second, that ...
root '/' no longer redirecting to /cgi-bin/luci/
So I was messing around a bit with nginx on my openwrt one router, nothing that should've affected uHTTPd but now I don't get redirected to the LuCI web interface from 192.168.1.1/ ...
Anybody else having issues on v25.12.0-rc2?
I'm on a Raspberry Pi 4B. After updating to the latest firmware v25.12.0-rc2 I can't connect to the router/Pi. The WiFi on the Pi is disabled. I only connect through Ethernet. ...
N00B Question - R9000 not suported but on git?
I haven't used open wrt before and need to buy a comparable router. I'm also not sure if I might swap to ddWRT (and I'm not really sure what the difference is) ...
D7800 + new partition layout + sysupgrade?
Hi all, I have a Netgear D7800 that I have run openwrt on for a long time. Does anyone else have one (or similar) and how do I get sysupgrades working? They error out when I upload a sysupgrade image, with an error about unsupported partition layout. ...
I'm not a bumper sticker person. I bought Linux stickers for my laptop, decided it was too much like a bumper sticker, didn't use them. But my routers? Somehow feels appropriate 😁
Pictured is my most recent victim, some free e-waste from work. It is now a mesh extension for my garage. ...
Router as tiny server?
Go with me here. Routers are routers, and servers are servers. Some people mix and match things, but generally, ideally, this is how it goes. And I agree. ...
I read that not all routers support VLANs, but I can't tell if mine does or not. I'm extremely new to VLANs and openwrt in general. Can someone give me a touch of guidance?
I'm old school, the last router firmware I touched was ddwrt on a 54g. These days it seems openwrt is the way to go. ...
Protecting OpenWrt using CrowdSec (via Syslog) ( kroon.email )
Here's how to set up CrowdSec to protect your OpenWrt router. ...
My Family Needs a New Router, Any Recommendations?
The Asus one I've got seems to be dying so I thought this might be a good time to give OpenWRT a shot now
Does OpenWRT work with ONT atyle setups?
I currently have a Phyhome P20 ONT setup. When I checked the list of supported devices for OpenWRT, I couldn't find it there. ...
¿Alguien usa Openwrt con Orange o Jazztel España? - Anyone use Openwrt with Orange or Jazztel Spain?
I am looking for anyone who is using OpenWrt with Orange or Jazztel Spain who might be able to help me figure out why after changing my router I can't get an Ipv6 allocated to my connection. #openwrt #Jazztel #orange #ipv6 #spain - I'd really appreciate any boosts to followers in spain who might be able to help - Its driving me ...
Looking for advice: Different WANs for different VLANs
Hi all. Thanks for checking in. I've been looking at Routing Rules and Routes to try and solve a couple of problems but I keep screwing up and taking down my whole network (and I've never been more grateful for serial ports). ...
Somewhere along the line I lost my Jazztel Ipv6 Connectivity
I think it was when I replaced my router with a new #BananapiR3 but my #openwrt v24 router has lost its #ipv6 connectivity from #Jazztel #fibre and I can't figure out why. - I have vague memories of something blocking it in the past (or did it just work when I connected it - I can't remember) but its annoying me now I have ...
Best Router device for openwrt 2025
Best Router device for openwrt 2025 ...
What's your favorite OpenWRT device?
Integrating Forum.openwrt.org with activityPub ( friendica.ginestes.es )
I really appreciate the OpenWrt forum but also like using an ActivityPub based account to browse posts on topics I am interested in. ...
OpenWrt Two will be a higher-performance router with 10 Gigabit LAN and WiFi 7 support ( liliputing.com )
OpenWrt 24.10 Brings Kernel 6.6 and Initial WiFi 7 Support ( linuxiac.com )
Multiple aerials on Wifi6 Router
Im considering purchasing a Banana Pi OpenWRT router. ...
OpenWrt One WiFi 6 router samples are now available for $89 ( liliputing.com )
OpenWrt 23.05.5 - Service Release ( forum.openwrt.org )
OpenWRT is very much in the spirit of the open internet
With so many devices implementing there own proprietary standards it is nice to have a way to have something open and standard
Anyone excited that companies are releasing hardware running stock OpenWRT?
I've noticed a few prosumer type devices are now on the market.