#
# This file will have to be sourced where needed
#

# Unset all optional variables first to start from a clean state
unset NONFREE           || true
unset CONTRIB           || true
unset EXTRANONFREE      || true
unset RESTRICTED        || true
unset UNIVERSE          || true
unset MULTIVERSE        || true
# allow configuration on command line
#unset LOCAL             || true
#unset LOCALDEBS         || true
unset SECURED           || true
unset GPG_HOMEDIR       || true
unset SIGNING_KEYID     || true
unset SECURITY          || true
unset BOOTDIR           || true
unset SYMLINK           || true
unset COPYLINK          || true
unset MKISOFS           || true
unset MKISOFS_OPTS      || true
unset ISOLINUX          || true
unset EXCLUDE           || true
unset SRCEXCLUDE        || true
unset NODEPENDS         || true
unset NORECOMMENDS      || true
unset NOSUGGESTS        || true
unset DEFBINSIZE        || true
unset DEFSRCSIZE        || true
unset FASTSUMS          || true
unset DI_CODENAME       || true
unset OMIT_MANUAL	    || true
unset OMIT_RELEASE_NOTES || true

if [ -z "$PROJECT" ]; then
  PROJECT=ubuntu
fi
if [ -z "$CAPPROJECT" ]; then
  CAPPROJECT="$(echo "$PROJECT" | perl -ne 'print ucfirst')"
fi

if [ -z "$DIST" ]; then
  DIST=karmic
fi

# The debian-cd dir
# Where I am (hoping I'm in the debian-cd dir)
export BASEDIR=`pwd`

case $DIST in
  trusty)
    export PREV_CODENAME=precise
    export CODENAME=trusty
    export CAPCODENAME='Trusty Tahr'
    export DEBVERSION="14.04.6 LTS"
    export BACKPORT_KERNEL=xenial
    export OFFICIAL="Release"
    ;;
  xenial)
    export PREV_CODENAME=wily
    export CODENAME=xenial
    export CAPCODENAME='Xenial Xerus'
    export DEBVERSION="16.04.7 LTS"
    export BACKPORT_KERNEL="hwe-16.04"
    export OFFICIAL="Release"
    ;;
  bionic)
    export PREV_CODENAME=artful
    export CODENAME=bionic
    export CAPCODENAME='Bionic Beaver'
    export DEBVERSION="18.04.6 LTS"
    export BACKPORT_KERNEL="hwe-18.04"
    export OFFICIAL="Release"
    ;;
  focal)
    export PREV_CODENAME=eoan
    export CODENAME=focal
    export CAPCODENAME='Focal Fossa'
    export DEBVERSION="20.04.6 LTS"
    export BACKPORT_KERNEL="hwe-20.04"
    export OFFICIAL="Release"
    ;;
  jammy)
    export PREV_CODENAME=impish
    export CODENAME=jammy
    export CAPCODENAME='Jammy Jellyfish'
    export DEBVERSION="22.04.3 LTS"
    export OFFICIAL="Release"
    ;;
  lunar)
    export PREV_CODENAME=kinetic
    export CODENAME=lunar
    export CAPCODENAME='Lunar Lobster'
    export DEBVERSION="23.04"
    export OFFICIAL="Release"
    ;;
  mantic)
    export PREV_CODENAME=lunar
    export CODENAME=mantic
    export CAPCODENAME='Mantic Minotaur'
    export DEBVERSION="23.10.1"
    export OFFICIAL="Release"
    ;;
  noble)
    export PREV_CODENAME=mantic
    export CODENAME=noble
    export CAPCODENAME='Noble Numbat'
    export DEBVERSION="24.04 LTS"
    export OFFICIAL="Daily"
    ;;

esac

# By default use Debian installer packages from $CODENAME
if [ ! "$DI_CODENAME" ]
then
  export DI_CODENAME=$CODENAME
fi

# If set, controls where the d-i components are downloaded from.
# This may be an url, or "default", which will make it use the default url
# for the daily d-i builds. If not set, uses the official d-i images from
# the Debian mirror.
#export DI_WWW_HOME=default

# installer for properly uploaded debian-installer builds, daily-installer
# for autobuilt dailies. The newest available version is selected
# automatically; this is an override.
#export DI_TYPE=installer

# ... for arch  
export ARCH=`dpkg --print-architecture`

export FULLARCH=$ARCH${SUBARCH:++$SUBARCH}

# IMPORTANT : The 4 following paths must be on the same partition/device.
#	      If they aren't then you must set COPYLINK below to 1. This
#	      takes a lot of extra room to create the sandbox for the ISO
#	      images, however. Also, if you are using an NFS partition for
#	      some part of this, you must use this option.
# Paths to the mirrors
export MIRROR=${MIRROR:-$CDIMAGE_ROOT/ftp}

# Path of the temporary directory
export TDIR=$CDIMAGE_ROOT/scratch/$PROJECT/$DIST/$IMAGE_TYPE/tmp

# Path where the images will be written
export OUT=$CDIMAGE_ROOT/scratch/$PROJECT/$DIST/$IMAGE_TYPE/debian-cd

# Where we keep the temporary apt stuff.
# This cannot reside on an NFS mount.
export APTTMP=$CDIMAGE_ROOT/scratch/$PROJECT/$DIST/$IMAGE_TYPE/apt
export APT_STATE=$APTTMP/$CODENAME-$FULLARCH/apt-state/
export APT_CACHE=$APTTMP/$CODENAME-$FULLARCH/apt-cache/

# Where extracted debootstrap scripts live
export DEBOOTSTRAP=$CDIMAGE_ROOT/scratch/$PROJECT/$DIST/$IMAGE_TYPE/debootstrap

# Where live filesystem images live
export LIVEIMAGES=$CDIMAGE_ROOT/scratch/$PROJECT/$DIST/$IMAGE_TYPE/live

# Do I want to have NONFREE merged in the CD set
# export NONFREE=1

# Do I want to have CONTRIB merged in the CD set
#export CONTRIB=1

# Do I want to have NONFREE on a separate CD (the last CD of the CD set)
# WARNING: Don't use NONFREE and EXTRANONFREE at the same time !
# export EXTRANONFREE=1

if [ -z "$CDIMAGE_ONLYFREE" ]; then
  export RESTRICTED=1
fi

if [ "$CDIMAGE_UNSUPPORTED" ]; then
  export UNIVERSE=1
  if [ -z "$CDIMAGE_ONLYFREE" ]; then
    export MULTIVERSE=1
  fi
fi

# If you have a $MIRROR/dists/$CODENAME/local/binary-$ARCH dir with 
# local packages that you want to put on the CD set then
# uncomment the following line 
# export LOCAL=1

# If your local packages are not under $MIRROR, but somewhere else, 
# you can uncomment this line and edit to to point to a directory
# containing dists/$CODENAME/local/binary-$ARCH
# export LOCALDEBS=$CDIMAGE_ROOT/local/packages

case $DIST in
  warty) ;;
  hoary|breezy|dapper|edgy|feisty|gutsy|hardy|intrepid|jaunty|karmic|lucid|maverick|natty|oneiric|precise|quantal|raring|saucy|trusty|utopic|vivid|wily)
    export GPG_HOMEDIR=$CDIMAGE_ROOT/secret/dot-gnupg/
    export SIGNING_KEYID=C5986B4F1257FFA86632CBA746181433FBB75451
    ;;
  *)
    export GPG_HOMEDIR=$CDIMAGE_ROOT/secret/dot-gnupg/
    export SIGNING_KEYID=843938DF228D22F7B3742BC0D94AA3F0EFE21092
    ;;
esac

# Use post-release updates?
export UPDATES=1

# Sparc only : bootdir (location of cd.b and second.b)
# export BOOTDIR=/boot

# Symlink farmers should uncomment this line :
# export SYMLINK=1

# Use this to force copying the files instead of symlinking or hardlinking
# them. This is useful if your destination directories are on a different
# partition than your source files.
# export COPYLINK=1

# Options
# export MKISOFS=/usr/bin/mkisofs
# export MKISOFS_OPTS="-r"		#For normal users
# export MKISOFS_OPTS="-r -F ."	#For symlink farmers

# Override for i386 and amd64 to use xorriso instead of
# mkisofs/genisoimage. Allows creation of isohybrid images: ISO images
# that will burn correctly onto a CD and also can be written raw to a
# USB stick. xorriso 0.6.5 and later has working support for this.
export i386_MKISOFS="xorriso"
export i386_MKISOFS_OPTS="-as mkisofs -r"
export amd64_MKISOFS="xorriso"
export amd64_MKISOFS_OPTS="-as mkisofs -r -iso-level 3"
export arm64_MKISOFS="xorriso"
export arm64_MKISOFS_OPTS="-as mkisofs -r"

case $DIST in
  bionic|focal)
    # temporary hack until such time as we can upgrade all builds to 1.4.2
    new_xorriso="/home/cdimage/xorriso/xorriso-1.2.4/xorriso/xorriso"
    if [ -x "$new_xorriso" ]; then
      export amd64_MKISOFS="$new_xorriso"
      export arm64_MKISOFS="$new_xorriso"
    fi
    ;;
  *)
    # switch to modern xorriso for all arches
    export MKISOFS=xorriso
    export MKISOFS_OPTS="-as mkisofs -r"
    ;;
esac

# ISOLinux support for multiboot on CD1 for i386
export ISOLINUX=1

# uncomment this to if you want to see more of what the Makefile is doing
#export VERBOSE_MAKE=1

# uncoment this to make build_all.sh try to build a simple CD image if
# the proper official CD run does not work
#ATTEMPT_FALLBACK=yes

# Set your disk size here in MB. Used in calculating package and
# source file layouts in build.sh and build_all.sh. Defaults are for
# CD-R.  For DVD-R the size limit is 4700372992 (see ubuntu-cdimage
# lib/cdimage/tree.py:DailyTreePublisher.size_limit) but we express here
# in MiB, so round down to 4482MiB (4699717632 bytes).  If we round up to
# 4483MiB we will *probably* still fit, but the limit would be 384KiB above
# the actual limit so there's some risk of being oversize for media.
if [ "$CDIMAGE_DVD" = 1 ]; then
  export DEFBINSIZE=4482
  export DEFSRCSIZE=4482
else
  #export DEFBINSIZE=700
  #export DEFSRCSIZE=645
  export DEFBINSIZE=4600
  export DEFSRCSIZE=4600
fi

# We don't want certain packages to take up space on CD1...
#export EXCLUDE="$BASEDIR"/tasks/exclude-sarge
# ...but they are okay for other CDs (UNEXCLUDEx == may be included on CD >= x)
#export UNEXCLUDE2="$BASEDIR"/tasks/unexclude-CD2-sarge
# Any packages listed in EXCLUDE but not in any UNEXCLUDE will be
# excluded completely.

# We also exclude some source packages
#export SRCEXCLUDE="$BASEDIR"/tasks/exclude-src-potato

export NODEPENDS=1

# Set this if the recommended packages should be skipped when adding 
# package on the CD.  The default is 'false'.
export NORECOMMENDS=1

# Set this if the suggested packages should be skipped when adding 
# package on the CD.  The default is 'true'.
export NOSUGGESTS=1

# Image format:
# iso  = Output an image in ISO 9660 format (.iso)
# img  = Output a raw partitioned disk image (.img)
if [ -z "$IMAGE_FORMAT" ]; then
  export IMAGE_FORMAT=iso
fi

# If set, use the md5sums from the main archive, rather than calculating
# them locally
export FASTSUMS=1

# Parameters to pass to kernel when the CD boots. Not currently supported
# for all architectures.
#export KERNEL_PARAMS="priority=critical"

# If set to 0, never overflow binary CDs (for when you only want a single CD
# and want to know when it overflows).
export OVERFLOWBINCDS=0

# If set, overrides the boot picture used.
if [ -z "$SPLASHRLE" ]; then
	export SPLASHRLE="$BASEDIR/data/$DI_CODENAME/splash.rle"
fi
if [ -z "$GFXSPLASH" ]; then
	export GFXSPLASH="$BASEDIR/data/$DI_CODENAME/splash.pcx"
fi
if [ -z "$SPLASHPNG" ]; then
	export SPLASHPNG="$BASEDIR/data/$DI_CODENAME/splash.png"
fi

# Used by build.sh to determine what to build, this is the name of a target
# in the Makefile. Use bin-official_images to build only binary CDs. The
# default, official_images, builds everything.
IMAGETARGET=bin-official_images

# Set to 1 to save space by omitting the installation manual. 
# If so the README will link to the manual on the web site.
#export OMIT_MANUAL=1

# Set to 1 to save space by omitting the release notes
# If so we will link to them on the web site.
export OMIT_RELEASE_NOTES=0

# Set this to override the defaul location
#export RELEASE_NOTES_LOCATION="http://www.debian.org/releases/$CODENAME"

COMPLETE=0