std::basic_stringbuf<CharT,Traits,Allocator>::seekoff

Repositions std::basic_streambuf::gptr and/or std::basic_streambuf::pptr, if possible, to the position that corresponds to exactly off characters from beginning, end, or current position of the get and/or put area of the buffer.

• If which includes std::ios_base::in and this buffer is open for reading (that is, if (which & std::ios_base::in) == std::ios_base::in), then repositions the read pointer std::basic_streambuf::gptr inside the get area as described below
• If which includes std::ios_base::out and this buffer is open for writing (that is, (which & std::ios_base::out) == std::ios_base::out), then repositions the write pointer std::basic_streambuf::pptr inside the put area as described below
• If which includes both std::ios_base::in and std::ios_base::out and the buffer is open for both reading and writing (that is, (which & (std::ios_base::in | std::ios_base::out)) == (std::ios_base::in | std::ios_base::out)), and dir is either std::ios_base::beg or std::ios_base::end, then repositions both read and write pointers as described below.
• Otherwise, this function fails.

If gptr and/or pptr is repositioned, it is done as follows:

[edit] Parameters

[edit] Return value

pos_type(newoff) on success, pos_type(off_type(-1)) on failure or if pos_type cannot represent the resulting stream position.

[edit] Example

#include <iostream>
#include <sstream>
 
int main()
{
    std::stringstream ss("123"); // in/out
    std::cout << "put pos = " << ss.tellp()
              << " get pos = " << ss.tellg() << '\n';
 
    // absolute positioning both pointers
    ss.rdbuf()->pubseekoff(1, std::ios_base::beg); // move both 1 forward
    std::cout << "put pos = " << ss.tellp()
              << " get pos = " << ss.tellg() << '\n';
 
    // try to move both pointers 1 forward from current position
    if (-1 == ss.rdbuf()->pubseekoff(1, std::ios_base::cur))
        std::cout << "moving both pointers from current position failed\n";
    std::cout << "put pos = " << ss.tellp()
              << " get pos = " << ss.tellg() << '\n';
 
    // move the write pointer 1 forward, but not the read pointer
    // can also be called as ss.seekp(1, std::ios_base::cur);
    ss.rdbuf()->pubseekoff(1, std::ios_base::cur, std::ios_base::out);
    std::cout << "put pos = " << ss.tellp()
              << " get pos = " << ss.tellg() << '\n';
 
    ss << 'a'; // write at put position
    std::cout << "Wrote 'a' at put position, the buffer is now " << ss.str() << '\n';
 
    char ch;
    ss >> ch;
    std::cout << "reading at get position gives '" << ch << "'\n";
}

put pos = 0 get pos = 0
put pos = 1 get pos = 1
moving both pointers from current position failed
put pos = 1 get pos = 1
put pos = 2 get pos = 1
Wrote 'a' at put position, the buffer is now 12a
reading at get position gives '2'

[edit] Defect reports

The following behavior-changing defect reports were applied retroactively to previously published C++ standards.

[edit] See also