Mailman 3 May 2020 - NumPy-Discussion

mixed mode arithmetic
by Neal Becker July 11, 2023

July 11, 2023

I've been browsing the numpy source. I'm wondering about mixed-mode arithmetic on arrays. I believe the way numpy handles this is that it never does mixed arithmetic, but instead converts arrays to a common type. Arguably, that might be efficient for a mix of say, double and float. Maybe not. But for a mix of complex and a scalar type (say, CDouble * Double), it's clearly suboptimal in efficiency. So, do I understand this correctly? If so, is that something we should improve?

4 6

Invalid value encoutered : how to prevent numpy.where to do this?
by Eric Emsellem Feb. 18, 2023

Feb. 18, 2023

Dear all, I have a code using lots of "numpy.where" to make some constrained calculations as in: data = arange(10) result = np.where(data == 0, 0., 1./data) # or data1 = arange(10) data2 = arange(10)+1.0 result = np.where(data1 > data2, np.sqrt(data1-data2), np.sqrt(data2-data2)) which then produces warnings like: /usr/bin/ipython:1: RuntimeWarning: invalid value encountered in sqrt or for the first example: /usr/bin/ipython:1: RuntimeWarning: divide by zero encountered in divide How do I avoid these messages to appear? I know that I could in principle use numpy.seterr. However, I do NOT want to remove these warnings for other potential divide/multiply/sqrt etc errors. Only when I am using a "where", to in fact avoid such warnings! Note that the warnings only happen once, but since I am going to release that code, I would like to avoid the user to get such messages which are irrelevant here (because I am testing, with the where, when NOT to divide by zero or take a sqrt of a negative number). thanks! Eric

5 4

Re: [Numpy-discussion] example reading binary Fortran file
by Neil Martinsen-Burrell July 22, 2021

July 22, 2021

David Froger <david.froger.info <at> gmail.com> writes: > Hy,My question is about reading Fortran binary file (oh no this question > again...) I've posted this before, but I finally got it cleaned up for the Cookbook. For this purpose I use a subclass of file that has methods for reading unformatted Fortran data. See http://www.scipy.org/Cookbook/FortranIO/FortranFile. I'd gladly see this in numpy or scipy somewhere, but I'm not sure where it belongs. > program makeArray > implicit none > integer,parameter:: nx=10,ny=20 > real(4),dimension(nx,ny):: ux,uy,p > integer :: i,j > open(11,file='uxuyp.bin',form='unformatted') > do i = 1,nx > do j = 1,ny > ux(i,j) = real(i*j) > uy(i,j) = real(i)/real(j) > p (i,j) = real(i) + real(j) > enddo > enddo > write(11) ux,uy > write(11) p > close(11) > end program makeArray When I run the above program compiled with gfortran on my Intel Mac, I can read it back with:: >>> import numpy as np >>> from fortranfile import FortranFile >>> f=FortranFile('uxuyp.bin', endian='<') >>> uxuy = f.readReals(prec='f') # 'f' for default reals >>> len(uxuy) 400 >>> ux = np.array(uxuy[:200]).reshape((20,10)).T >>> uy = np.array(uxuy[200:]).reshape((20,10)).T >>> p = f.readReals('f').reshape((20,10)).T >>> ux array([[ 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20.], [ 2., 4., 6., 8., 10., 12., 14., 16., 18., 20., 22., 24., 26., 28., 30., 32., 34., 36., 38., 40.], [ 3., 6., 9., 12., 15., 18., 21., 24., 27., 30., 33., 36., 39., 42., 45., 48., 51., 54., 57., 60.], [ 4., 8., 12., 16., 20., 24., 28., 32., 36., 40., 44., 48., 52., 56., 60., 64., 68., 72., 76., 80.], [ 5., 10., 15., 20., 25., 30., 35., 40., 45., 50., 55., 60., 65., 70., 75., 80., 85., 90., 95., 100.], [ 6., 12., 18., 24., 30., 36., 42., 48., 54., 60., 66., 72., 78., 84., 90., 96., 102., 108., 114., 120.], [ 7.,Proxy-Connection: keep-alive Cache-Control: max-age=0 14., 21., 28., 35., 42., 49., 56., 63., 70., 77., 84., 91., 98., 105., 112., 119., 126., 133., 140.], [ 8., 16., 24., 32., 40., 48., 56., 64., 72., 80., 88., 96., 104., 112., 120., 128., 136., 144., 152., 160.], [ 9., 18., 27., 36., 45., 54., 63., 72., 81., 90., 99., 108., 117., 126., 135., 144., 153., 162., 171., 180.], [ 10., 20., 30., 40., 50., 60., 70., 80., 90., 100., 110., 120., 130., 140., 150., 160., 170., 180., 190., 200.]]) >>> uy array([[ 1. , 0.5 , 0.33333334, 0.25 , 0.2 , 0.16666667, 0.14285715, 0.125 , 0.11111111, 0.1 , 0.09090909, 0.08333334, 0.07692308, 0.07142857, 0.06666667, 0.0625 , 0.05882353, 0.05555556, 0.05263158, 0.05 ], [ 2. , 1. , 0.66666669, 0.5 , 0.40000001, 0.33333334, 0.2857143 , 0.25 , 0.22222222, 0.2 , 0.18181819, 0.16666667, 0.15384616, 0.14285715, 0.13333334, 0.125 , 0.11764706, 0.11111111, 0.10526316, 0.1 ], [ 3. , 1.5 , 1. , 0.75 , 0.60000002, 0.5 , 0.42857143, 0.375 , 0.33333334, 0.30000001, 0.27272728, 0.25 , 0.23076923, 0.21428572, 0.2 , 0.1875 , 0.17647059, 0.16666667, 0.15789473, 0.15000001], [ 4. , 2. , 1.33333337, 1. , 0.80000001, 0.66666669, 0.5714286 , 0.5 , 0.44444445, 0.40000001, 0.36363637, 0.33333334, 0.30769232, 0.2857143 , 0.26666668, 0.25 , 0.23529412, 0.22222222, 0.21052632, 0.2 ], [ 5. , 2.5 , 1.66666663, 1.25 , 1. , 0.83333331, 0.71428573, 0.625 , 0.55555558, 0.5 , 0.45454547, 0.41666666, 0.38461539, 0.35714287, 0.33333334, 0.3125 , 0.29411766, 0.27777779, 0.2631579 , 0.25 ], [ 6. , 3. , 2. , 1.5 , 1.20000005, 1. , 0.85714287, 0.75 , 0.66666669, 0.60000002, 0.54545456, 0.5 , 0.46153846, 0.42857143, 0.40000001, 0.375 , 0.35294119, 0.33333334, 0.31578946, 0.30000001], [ 7. , 3.5 , 2.33333325, 1.75 , 1.39999998, 1.16666663, 1. , 0.875 , 0.77777779, 0.69999999, 0.63636363, 0.58333331, 0.53846157, 0.5 , 0.46666667, 0.4375 , 0.41176471, 0.3888889 , 0.36842105, 0.34999999], [ 8. , 4. , 2.66666675, 2. , 1.60000002, 1.33333337, 1.14285719, 1. , 0.8888889 , 0.80000001, 0.72727275, 0.66666669, 0.61538464, 0.5714286 , 0.53333336, 0.5 , 0.47058824, 0.44444445, 0.42105263, 0.40000001], [ 9. , 4.5 , 3. , 2.25 , 1.79999995, 1.5 , 1.28571427, 1.125 , 1. , 0.89999998, 0.81818181, 0.75 , 0.69230771, 0.64285713, 0.60000002, 0.5625 , 0.52941179, 0.5 , 0.47368422, 0.44999999], [ 10. , 5. , 3.33333325, 2.5 , 2. , 1.66666663, 1.42857146, 1.25 , 1.11111116, 1. , 0.90909094, 0.83333331, 0.76923078, 0.71428573, 0.66666669, 0.625 , 0.58823532, 0.55555558, 0.52631581, 0.5 ]]) >>> p array([[ 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21.], [ 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22.], [ 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23.], [ 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24.], [ 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25.], [ 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26.], [ 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27.], [ 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28.], [ 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29.], [ 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29., 30.]]) Note that you have to provide the shape information for ux and uy because fortran writes them together as a stream of 400 numbers. -Neil

10 10

help translating Hindi into English
by Inessa Pawson June 18, 2020

June 18, 2020

The initial stage of the NumPy community survey project in partnership with the students and faculty from the Master’s program in Survey Methodology at the University of Michigan and the University of Maryland has been successfully completed. Currently, we are looking for a volunteer to help with the back translation of the Hindi version of the survey questionnaire (Hindi into English). If you are available, or you know someone who would be interested to help, please leave a comment here: https://github.com/numpy/numpy-surveys/issues/1 . -- Every good wish, *Inessa Pawson* Executive Director Albus Code

2 2

(no subject)
by Charles R Harris June 4, 2020

June 4, 2020

Hi All, On behalf of the NumPy team I am pleased to announce that NumPy 1.19.0rc2 has been released. This NumPy release supports Python 3.6-3.8 and is marked by the removal of much technical debt: support for Python 2 has been removed, many deprecations have been expired, and documentation has been improved. The polishing of the random module continues apace with bug fixes and better usability from Cython. Perhaps the most interesting thing for users will be the availability of wheels for aarch64 and PyPY. Downstream developers should use Cython >= 0.29.16 for Python 3.8 support and OpenBLAS >= 3.7 to avoid wrong results on the Skylake architecture. The NumPy Wheels for this release can be downloaded from PyPI <https://pypi.org/project/numpy/1.19.0rc2/>, source archives and release notes are available from Github <https://github.com/numpy/numpy/releases/tag/v1.19.0rc2>. *Contributors* A total of 124 people contributed to this release. People with a "+" by their names contributed a patch for the first time. - Alex Henrie - Alexandre de Siqueira + - Andras Deak - Andrea Sangalli + - Andreas Klöckner + - Andrei Shirobokov + - Anirudh Subramanian + - Anne Bonner - Anton Ritter-Gogerly + - Benjamin Trendelkamp-Schroer + - Bharat Raghunathan - Brandt Bucher + - Brian Wignall - Bui Duc Minh + - Changqing Li + - Charles Harris - Chris Barker - Chris Holland + - Christian Kastner + - Chunlin + - Chunlin Fang + - Damien Caliste + - Dan Allan - Daniel Hrisca - Daniel Povey + - Dustan Levenstein + - Emmanuelle Gouillart + - Eric Larson - Eric M. Bray - Eric Mariasis + - Eric Wieser - Erik Welch + - Fabio Zeiser + - Gabriel Gerlero + - Ganesh Kathiresan + - Gengxin Xie + - Guilherme Leobas - Guillaume Peillex + - Hameer Abbasi - Hao Jin + - Harshal Prakash Patankar + - Heshy Roskes + - Himanshu Garg + - Huon Wilson + - John Han + - John Kirkham - Jon Dufresne - Jon Morris + - Josh Wilson - Justus Magin - Kai Striega - Kerem Hallaç + - Kevin Sheppard - Kirill Zinovjev + - Marcin Podhajski + - Mark Harfouche - Marten van Kerkwijk - Martin Michlmayr + - Masashi Kishimoto + - Mathieu Lamarre - Matt Hancock + - MatteoRaso + - Matthew Harrigan - Matthias Bussonnier - Matti Picus - Max Balandat + - Maximilian Konrad + - Maxwell Aladago - Maxwell Bileschi + - Melissa Weber Mendonça + - Michael Felt - Mike Taves - Nico Schlömer - Pan Jan + - Paul Rougieux + - Pauli Virtanen - Peter Andreas Entschev - Petre-Flaviu Gostin + - Pierre de Buyl - Piotr Gaiński + - Przemyslaw Bartosik + - Raghuveer Devulapalli - Rakesh Vasudevan + - Ralf Gommers - RenaRuirui + - Roman Yurchak - Ross Barnowski + - Ryan + - Ryan Soklaski - Sanjeev Kumar + - SanthoshBala18 + - Sayed Adel + - Sebastian Berg - Seth Troisi - Sha Liu + - Siba Smarak Panigrahi + - Simon Gasse + - Stephan Hoyer - Steve Dower + - Thomas A Caswell - Till Hoffmann + - Tim Hoffmann - Tina Oberoi + - Tirth Patel - Tyler Reddy - Warren Weckesser - Wojciech Rzadkowski + - Xavier Thomas + - Yilin LI + - Zac Hatfield-Dodds + - Zé Vinícius + - @Adam + - @Anthony + - @Jim + - @bartosz-grabowski + - @dojafrat + - @gamboon + - @jfbu + - @keremh + - @mayeut + - @ndunnewind + - @nglinh + - @shreepads + - @sslivkoff + Cheers, Charles Harris

4 8

Reminder: June 01 Deadline for the 2020 John Hunter Excellence in Plotting contest!
by Madicken Munk June 1, 2020

June 1, 2020

Dear numpy community, My apologies for repeated in-list and cross-list posts! I'd like to remind everybody that the 2020 John Hunter Excellence in Plotting Contest submission deadline is June 01 -- only a few days away. We welcome and look forward to your submissions! In memory of John Hunter, we are pleased to announce the John Hunter Excellence in Plotting Contest for 2020. This open competition aims to highlight the importance of data visualization to scientific progress and showcase the capabilities of open source software. Participants are invited to submit scientific plots to be judged by a panel. The winning entries will be announced and displayed at SciPy 2020 or announced in the John Hunter Excellence in Plotting Contest website and youtube channel. John Hunter’s family are graciously sponsoring cash prizes for the winners in the following amounts: - 1st prize: $1000 - 2nd prize: $750 - 3rd prize: $500 - Entries must be submitted by June 1st to the form at https://forms.gle/SrexmkDwiAmDc7ej7 - Winners will be announced at Scipy 2020 or publicly on the John Hunter Excellence in Plotting Contest website and youtube channel - Participants do not need to attend the Scipy conference. - Entries may take the definition of “visualization” rather broadly. Entries may be, for example, a traditional printed plot, an interactive visualization for the web, a dashboard, or an animation. - Source code for the plot must be provided, in the form of Python code and/or a Jupyter notebook, along with a rendering of the plot in a widely used format. The rendering may be, for example, PDF for print, standalone HTML and Javascript for an interactive plot, or MPEG-4 for a video. If the original data can not be shared for reasons of size or licensing, "fake" data may be substituted, along with an image of the plot using real data. - Each entry must include a 300-500 word abstract describing the plot and its importance for a general scientific audience. - Entries will be judged on their clarity, innovation and aesthetics, but most importantly for their effectiveness in communicating a real-world problem. Entrants are encouraged to submit plots that were used during the course of research or work, rather than merely being hypothetical. - SciPy and the John Hunter Excellence in Plotting Contest organizers reserves the right to display any and all entries, whether prize-winning or not, at the conference, use in any materials or on its website, with attribution to the original author(s). - Past entries can be found at https://jhepc.github.io/ - Questions regarding the contest can be sent to jhepc.organizers(a)gmail.com John Hunter Excellence in Plotting Contest Co-Chairs Madicken Munk Nelle Varoquaux

1 1

Numpy Documentation: How-to content
by Cooper, Ryan May 31, 2020

May 31, 2020

Greetings, This is Ryan Cooper (ME professor at University of Connecticut). I've been using Numpy in my mechanical engineering courses for years now, and I'd like to build resources for newcomers to Numpy. Here is my proposed contribution: Advise engineering students here at UConn to build How-to notebooks for Numpy applications. This would give the students some great experience communicating concepts and procedures to a broader community and it would help future users see how to use Numpy in different applications. Some How-to's that I had in mind would be: * Saving and loading Numpy arrays * Doing fast fourier transform (FFT) on time-series data to find natural frequencies * Solving linear sets of equations for circuits or another linear system with linear algebra * using eigenvalues for natural frequency calculations I'm open to other suggestions. These are some of the applications that I have current students doing in engineering work. My question is: Would these How-to's be appopriate for the "Numpy Tutorials" (https://github.com/numpy/numpy-tutorials) repo? My personal opinion is that How-to's are easier to organize and curate (for Numpy) and easier to write (for students). Best Regards, Ryan Ryan C. Cooper, Ph. D. Assistant Professor-in-Residence University of Connecticut Mechanical Engineering Department Engineering II, room 314 191 Auditorium rd Storrs, CT 06269 email: ryan.c.cooper(a)uconn.edu

2 1

ANN: SciPy 1.5.0rc1 -- please test
by Tyler Reddy May 30, 2020

May 30, 2020

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi all, On behalf of the SciPy development team I'm pleased to announce the release candidate SciPy 1.5.0rc1. Please help us test this pre-release. Sources and binary wheels can be found at: https://pypi.org/project/scipy/ and at: https://github.com/scipy/scipy/releases/tag/v1.5.0rc1 <https://github.com/scipy/scipy/releases/tag/v1.4.0rc1> One of a few ways to install the release candidate with pip: pip install scipy==1.5.0rc1 ========================== SciPy 1.5.0 Release Notes ========================== Note: Scipy 1.5.0 is not released yet! SciPy 1.5.0 is the culmination of 6 months of hard work. It contains many new features, numerous bug-fixes, improved test coverage and better documentation. There have been a number of deprecations and API changes in this release, which are documented below. All users are encouraged to upgrade to this release, as there are a large number of bug-fixes and optimizations. Before upgrading, we recommend that users check that their own code does not use deprecated SciPy functionality (to do so, run your code with ``python -Wd`` and check for ``DeprecationWarning`` s). Our development attention will now shift to bug-fix releases on the 1.5.x branch, and on adding new features on the master branch. This release requires Python 3.6+ and NumPy 1.14.5 or greater. For running on PyPy, PyPy3 6.0+ and NumPy 1.15.0 are required. Highlights of this release --------------------------------- - wrappers for more than a dozen new ``LAPACK`` routines are now available in `scipy.linalg.lapack` - Improved support for leveraging 64-bit integer size from linear algebra backends - addition of the probability distribution for two-sided one-sample Kolmogorov-Smirnov tests New features ============ `scipy.cluster` improvements --------------------------------------- Initialization of `scipy.cluster.vq.kmeans2` using ``minit="++"`` had a quadratic complexity in the number of samples. It has been improved, resulting in a much faster initialization with quasi-linear complexity. `scipy.cluster.hierarchy.dendrogram` now respects the ``matplotlib`` color palette `scipy.fft` improvements ---------------------------------- A new keyword-only argument ``plan`` is added to all FFT functions in this module. It is reserved for passing in a precomputed plan from libraries providing a FFT backend (such as ``PyFFTW`` and ``mkl-fft``), and it is currently not used in SciPy. `scipy.integrate` improvements ------------------------------------------ `scipy.interpolate` improvements -------------------------------------------- `scipy.io` improvements -------------------------------- `scipy.io.wavfile` error messages are more explicit about what's wrong, and extraneous bytes at the ends of files are ignored instead of raising an error when the data has successfully been read. `scipy.io.loadmat` gained a ``simplify_cells`` parameter, which if set to ``True`` simplifies the structure of the return value if the ``.mat`` file contains cell arrays. ``pathlib.Path`` objects are now supported in `scipy.io` Matrix Market I/O functions `scipy.linalg` improvements -------------------------------------- `scipy.linalg.eigh` has been improved. Now various ``LAPACK`` drivers can be selected at will and also subsets of eigenvalues can be requested via ``subset_by_value`` keyword. Another keyword ``subset_by_index`` is introduced. Keywords ``turbo`` and ``eigvals`` are deprecated. Similarly, standard and generalized Hermitian eigenvalue ``LAPACK`` routines ``?<sy/he>evx`` are added and existing ones now have full ``_lwork`` counterparts. Wrappers for the following ``LAPACK`` routines have been added to `scipy.linalg.lapack`: - ``?getc2``: computes the LU factorization of a general matrix with complete pivoting - ``?gesc2``: solves a linear system given an LU factorization from ``?getc2`` - ``?gejsv``: computes the singular value decomposition of a general matrix with higher accuracy calculation of tiny singular values and their corresponding singular vectors - ``?geqrfp``: computes the QR factorization of a general matrix with non-negative elements on the diagonal of R - ``?gtsvx``: solves a linear system with general tridiagonal matrix - ``?gttrf``: computes the LU factorization of a tridiagonal matrix - ``?gttrs``: solves a linear system given an LU factorization from ``?gttrf`` - ``?ptsvx``: solves a linear system with symmetric positive definite tridiagonal matrix - ``?pttrf``: computes the LU factorization of a symmetric positive definite tridiagonal matrix - ``?pttrs``: solves a linear system given an LU factorization from ``?pttrf`` - ``?pteqr``: computes the eigenvectors and eigenvalues of a positive definite tridiagonal matrix - ``?tbtrs``: solves a linear system with a triangular banded matrix - ``?csd``: computes the Cosine Sine decomposition of an orthogonal/unitary matrix Generalized QR factorization routines (``?geqrf``) now have full ``_lwork`` counterparts. `scipy.linalg.cossin` Cosine Sine decomposition of unitary matrices has been added. The function `scipy.linalg.khatri_rao`, which computes the Khatri-Rao product, was added. The new function `scipy.linalg.convolution_matrix` constructs the Toeplitz matrix representing one-dimensional convolution. `scipy.ndimage` improvements ------------------------------------------ `scipy.optimize` improvements ----------------------------------------- The finite difference numerical differentiation used in various ``minimize`` methods that use gradients has several new features: - 2-point, 3-point, or complex step finite differences can be used. Previously only a 2-step finite difference was available. - There is now the possibility to use a relative step size, previously only an absolute step size was available. - If the ``minimize`` method uses bounds the numerical differentiation strictly obeys those limits. - The numerical differentiation machinery now makes use of a simple cache, which in some cases can reduce the number of function evaluations. - ``minimize``'s ``method= 'powell'`` now supports simple bound constraints There have been several improvements to `scipy.optimize.linprog`: - The ``linprog`` benchmark suite has been expanded considerably. - ``linprog``'s dense pivot-based redundancy removal routine and sparse presolve are faster - When ``scikit-sparse`` is available, solving sparse problems with ``method='interior-point'`` is faster The caching of values when optimizing a function returning both value and gradient together has been improved, avoiding repeated function evaluations when using a ``HessianApproximation`` such as ``BFGS``. ``differential_evolution`` can now use the modern ``np.random.Generator`` as well as the legacy ``np.random.RandomState`` as a seed. `scipy.signal` improvements -------------------------------------- A new optional argument ``include_nyquist`` is added to ``freqz`` functions in this module. It is used for including the last frequency (Nyquist frequency). `scipy.signal.find_peaks_cwt` now accepts a ``window_size`` parameter for the size of the window used to calculate the noise floor. `scipy.sparse` improvements ---------------------------------------- Outer indexing is now faster when using a 2d column vector to select column indices. `scipy.sparse.lil.tocsr` is faster Fixed/improved comparisons between pydata sparse arrays and sparse matrices BSR format sparse multiplication performance has been improved. `scipy.sparse.linalg.LinearOperator` has gained the new ``ndim`` class attribute `scipy.spatial` improvements --------------------------------------- `scipy.spatial.geometric_slerp` has been added to enable geometric spherical linear interpolation on an n-sphere `scipy.spatial.SphericalVoronoi` now supports calculation of region areas in 2D and 3D cases The tree building algorithm used by ``cKDTree`` has improved from quadratic worst case time complexity to loglinear. Benchmarks are also now available for building and querying of balanced/unbalanced kd-trees. `scipy.special` improvements ---------------------------------------- The following functions now have Cython interfaces in `cython_special`: - `scipy.special.erfinv` - `scipy.special.erfcinv` - `scipy.special.spherical_jn` - `scipy.special.spherical_yn` - `scipy.special.spherical_in` - `scipy.special.spherical_kn` `scipy.special.log_softmax` has been added to calculate the logarithm of softmax function. It provides better accuracy than ``log(scipy.special.softmax(x))`` for inputs that make softmax saturate. `scipy.stats` improvements ------------------------------------- The function for generating random samples in `scipy.stats.dlaplace` has been improved. The new function is approximately twice as fast with a memory footprint reduction between 25 % and 60 % (see gh-11069). `scipy.stats` functions that accept a seed for reproducible calculations using random number generation (e.g. random variates from distributions) can now use the modern ``np.random.Generator`` as well as the legacy ``np.random.RandomState`` as a seed. The ``axis`` parameter was added to `scipy.stats.rankdata`. This allows slices of an array along the given axis to be ranked independently. The ``axis`` parameter was added to `scipy.stats.f_oneway`, allowing it to compute multiple one-way ANOVA tests for data stored in n-dimensional arrays. The performance of ``f_oneway`` was also improved for some cases. The PDF and CDF methods for ``stats.geninvgauss`` are now significantly faster as the numerical integration to calculate the CDF uses a Cython based ``LowLevelCallable``. Moments of the normal distribution (`scipy.stats.norm`) are now calculated using analytical formulas instead of numerical integration for greater speed and accuracy Moments and entropy trapezoidal distribution (`scipy.stats.trapz`) are now calculated using analytical formulas instead of numerical integration for greater speed and accuracy Methods of the truncated normal distribution (`scipy.stats.truncnorm`), especially ``_rvs``, are significantly faster after a complete rewrite. The `fit` method of the Laplace distribution, `scipy.stats.laplace`, now uses the analytical formulas for the maximum likelihood estimates of the parameters. Generation of random variates is now thread safe for all SciPy distributions. 3rd-party distributions may need to modify the signature of the ``_rvs()`` method to conform to ``_rvs(self, ..., size=None, random_state=None)``. (A one-time VisibleDeprecationWarning is emitted when using non-conformant distributions.) The Kolmogorov-Smirnov two-sided test statistic distribution (`scipy.stats.kstwo`) was added. Calculates the distribution of the K-S two-sided statistic ``D_n`` for a sample of size n, using a mixture of exact and asymptotic algorithms. The new function ``median_abs_deviation`` replaces the deprecated ``median_absolute_deviation``. The ``wilcoxon`` function now computes the p-value for Wilcoxon's signed rank test using the exact distribution for inputs up to length 25. The function has a new ``mode`` parameter to specify how the p-value is to be computed. The default is ``"auto"``, which uses the exact distribution for inputs up to length 25 and the normal approximation for larger inputs. Added a new Cython-based implementation to evaluate guassian kernel estimates, which should improve the performance of ``gaussian_kde`` The ``winsorize`` function now has a ``nan_policy`` argument for refined handling of ``nan`` input values. The ``binned_statistic_dd`` function with ``statistic="std"`` performance was improved by ~4x. ``scipy.stats.kstest(rvs, cdf,...)`` now handles both one-sample and two-sample testing. The one-sample variation uses `scipy.stats.ksone` (or `scipy.stats.kstwo` with back off to `scipy.stats.kstwobign`) to calculate the p-value. The two-sample variation, invoked if ``cdf`` is array_like, uses an algorithm described by Hodges to compute the probability directly, only backing off to `scipy.stats.kstwo` in case of overflow. The result in both cases is more accurate p-values, especially for two-sample testing with smaller (or quite different) sizes. `scipy.stats.maxwell` performance improvements include a 20 % speed up for `fit()`` and 5 % for ``pdf()`` `scipy.stats.shapiro` and `scipy.stats.jarque_bera` now return a named tuple for greater consistency with other ``stats`` functions Deprecated features ================ `scipy` deprecations ---------------------------- `scipy.special` changes --------------------------------- The ``bdtr``, ``bdtrc``, and ``bdtri`` functions are deprecating non-negative non-integral ``n`` arguments. `scipy.stats` changes ----------------------------- The function ``median_absolute_deviation`` is deprecated. Use ``median_abs_deviation`` instead. The use of the string ``"raw"`` with the ``scale`` parameter of ``iqr`` is deprecated. Use ``scale=1`` instead. Backwards incompatible changes ========================== `scipy.interpolate` changes ------------------------------------- `scipy.linalg` changes ----------------------------- The output signatures of ``?syevr``, ``?heevr`` have been changed from ``w, v, info`` to ``w, v, m, isuppz, info`` The order of output arguments ``w``, ``v`` of ``<sy/he>{gv, gvd, gvx}`` is swapped. `scipy.signal` changes ------------------------------- The output length of `scipy.signal.upfirdn` has been corrected, resulting outputs may now be shorter for some combinations of up/down ratios and input signal and filter lengths. `scipy.signal.resample` now supports a ``domain`` keyword argument for specification of time or frequency domain input. `scipy.stats` changes ----------------------------- Other changes ============= Improved support for leveraging 64-bit integer size from linear algebra backends in several parts of the SciPy codebase. Shims designed to ensure the compatibility of SciPy with Python 2.7 have now been removed. Many warnings due to unused imports and unused assignments have been addressed. Many usage examples were added to function docstrings, and many input validations and intuitive exception messages have been added throughout the codebase. Early stage adoption of type annotations in a few parts of the codebase Authors ======= * @endolith * Hameer Abbasi * ADmitri + * Wesley Alves + * Berkay Antmen + * Sylwester Arabas + * Arne KÃ¼derle + * Christoph Baumgarten * Peter Bell * Felix Berkenkamp * JordÃ£o Bragantini + * Clemens Brunner + * Evgeni Burovski * Matthias Bussonnier + * CJ Carey * Derrick Chambers + * Leander Claes + * Christian Clauss * Luigi F. Cruz + * dankleeman * Andras Deak * Milad Sadeghi DM + * jeremie du boisberranger + * Stefan Endres * Malte Esders + * Leo Fang + * felixhekhorn + * Isuru Fernando * Andrew Fowlie * Lakshay Garg + * Gaurav Gijare + * Ralf Gommers * Emmanuelle Gouillart + * Kevin Green + * Martin Grignard + * Maja Gwozdz * gyu-don + * Matt Haberland * hakeemo + * Charles Harris * Alex Henrie * Santi Hernandez + * William Hickman + * Till Hoffmann + * Joseph T. Iosue + * Anany Shrey Jain * Jakob Jakobson * Charles Jekel + * Julien Jerphanion + * Jiacheng-Liu + * Christoph Kecht + * Paul Kienzle + * Reidar Kind + * Dmitry E. Kislov + * Konrad + * Konrad0 * Takuya KOUMURA + * Krzysztof PiÃ³ro * Peter Mahler Larsen * Eric Larson * Antony Lee * Gregory Lee + * Gregory R. Lee * Chelsea Liu * Cong Ma + * Kevin Mader + * Maja GwÃ³ÅºdÅº + * Alex Marvin + * Matthias KÃ¼mmerer * Nikolay Mayorov * Mazay0 + * G. D. McBain * Nicholas McKibben + * Sabrina J. Mielke + * Sebastian J. Mielke + * MiloÅ¡ KomarÄ eviÄ‡ + * Shubham Mishra + * Santiago M. Mola + * Grzegorz Mrukwa + * Peyton Murray * Andrew Nelson * Nico SchlÃ¶mer * nwjenkins + * odidev + * Sambit Panda * Vikas Pandey + * Rick Paris + * Harshal Prakash Patankar + * Balint Pato + * Matti Picus * Ilhan Polat * poom + * Siddhesh Poyarekar * Vladyslav Rachek + * Bharat Raghunathan * Manu Rajput + * Tyler Reddy * Andrew Reed + * Lucas Roberts * Ariel Rokem * Heshy Roskes * Matt Ruffalo * Atsushi Sakai + * Benjamin Santos + * Christoph Schock + * Lisa Schwetlick + * Chris Simpson + * Leo Singer * Kai Striega * SÃ¸ren Fuglede JÃ¸rgensen * Kale-ab Tessera + * Seth Troisi + * Robert Uhl + * Paul van Mulbregt * Vasiliy + * Isaac Virshup + * Pauli Virtanen * Shakthi Visagan + * Jan Vleeshouwers + * Sam Wallan + * Lijun Wang + * Warren Weckesser * Richard Weiss + * wenhui-prudencemed + * Eric Wieser * Josh Wilson * James Wright + * Ruslan Yevdokymov + * Ziyao Zhang + A total of 129 people contributed to this release. People with a "+" by their names contributed a patch for the first time. This list of names is automatically generated, and may not be fully complete. Issues closed for 1.5.0 ------------------------------- * `#1455 <https://github.com/scipy/scipy/issues/1455>`__: ellipord does returns bogus values if gstop or gpass are negative... * `#1968 <https://github.com/scipy/scipy/issues/1968>`__: correlate2d's output does not agree with correlate's output in... * `#2744 <https://github.com/scipy/scipy/issues/2744>`__: BUG: optimize: '\*\*kw' argument of 'newton_krylov' is not documented * `#4755 <https://github.com/scipy/scipy/issues/4755>`__: TypeError: data type "<i0" not understood * `#4921 <https://github.com/scipy/scipy/issues/4921>`__: scipy.optimize maxiter option not working as expected * `#5144 <https://github.com/scipy/scipy/issues/5144>`__: RuntimeWarning on csgraph.shortest_path when edge lengths are... * `#5309 <https://github.com/scipy/scipy/issues/5309>`__: Documentation of 'hybr' and 'lm' inconsistent in optimize.root * `#6026 <https://github.com/scipy/scipy/issues/6026>`__: Replace approx_grad with _numdiff.approx_derivative in scipy.optimize * `#6502 <https://github.com/scipy/scipy/issues/6502>`__: Computing Eigenvalues in an Interval with LAPACK * `#7058 <https://github.com/scipy/scipy/issues/7058>`__: Errors in special.bdtri and special.bdtr for non-integer k values * `#7700 <https://github.com/scipy/scipy/issues/7700>`__: SuperLU does not respect perm_c="NATURAL" * `#7895 <https://github.com/scipy/scipy/issues/7895>`__: Improvements to io.loadmat * `#8205 <https://github.com/scipy/scipy/issues/8205>`__: ValueError in scipy.linalg.eigvalsh for large matrix * `#8278 <https://github.com/scipy/scipy/issues/8278>`__: Memory limit for scipy.sparse.linalg.spsolve with scikit-umfpack * `#8327 <https://github.com/scipy/scipy/issues/8327>`__: scipy.stats.mstats.winsorize NaN handling * `#8341 <https://github.com/scipy/scipy/issues/8341>`__: scipy.stats.ks_2samp for masked and unmasked data give different... * `#8748 <https://github.com/scipy/scipy/issues/8748>`__: scipy.stats.kstest for same distribution: p-values nonuniform * `#9042 <https://github.com/scipy/scipy/issues/9042>`__: optimize: Incorrect statement about \`jac\` in the \`minimize\`... * `#9197 <https://github.com/scipy/scipy/issues/9197>`__: problem with scipy.signal.butter with 1000+ points array * `#9212 <https://github.com/scipy/scipy/issues/9212>`__: EIGH very very slow --> suggesting an easy fix * `#9553 <https://github.com/scipy/scipy/issues/9553>`__: ndimage routines behave badly when output has memory overlap... * `#9632 <https://github.com/scipy/scipy/issues/9632>`__: ndimage.maximum_filter undocumented behaviour using footprint... * `#9710 <https://github.com/scipy/scipy/issues/9710>`__: stats.weightedtau([1], [1.0]) SEGFAULTs * `#9797 <https://github.com/scipy/scipy/issues/9797>`__: Master Tracker for some Kolmogorov-Smirnov test Issues * `#9844 <https://github.com/scipy/scipy/issues/9844>`__: scipy.signal.upfirdn gives different length matrix versus MATLAB... * `#9872 <https://github.com/scipy/scipy/issues/9872>`__: scipy.signal.convolve is slower when vectorized * `#9913 <https://github.com/scipy/scipy/issues/9913>`__: BUG: No dt in StateSpace operations * `#10014 <https://github.com/scipy/scipy/issues/10014>`__: Distribution names \`weibull_min\`and \`weibull_max\` should... * `#10159 <https://github.com/scipy/scipy/issues/10159>`__: BUG: stats: chisquare returns incorrect results for arrays of... * `#10302 <https://github.com/scipy/scipy/issues/10302>`__: scipy.fft: Add a \`plan\` argument * `#10332 <https://github.com/scipy/scipy/issues/10332>`__: 'Incomplete wav chunk' inconsistent/reason unknown * `#10441 <https://github.com/scipy/scipy/issues/10441>`__: Remove uses of \`numpy.dual\`? * `#10558 <https://github.com/scipy/scipy/issues/10558>`__: Document implicit sum in csr_matrix() constructor * `#10788 <https://github.com/scipy/scipy/issues/10788>`__: LU with full pivoting * `#10841 <https://github.com/scipy/scipy/issues/10841>`__: Unexpected behavior in linalg.blas.dtrmm wrapper * `#10919 <https://github.com/scipy/scipy/issues/10919>`__: optimize._lbfgsb setulb() function violates parameter bounds * `#10963 <https://github.com/scipy/scipy/issues/10963>`__: kstest, ks_2samp: confusing \`mode\` argument descriptions * `#11022 <https://github.com/scipy/scipy/issues/11022>`__: Unexpected Result in factorial function with NaN input * `#11028 <https://github.com/scipy/scipy/issues/11028>`__: Documentation error in optimize.minimize * `#11058 <https://github.com/scipy/scipy/issues/11058>`__: Adding logsoftmax function * `#11076 <https://github.com/scipy/scipy/issues/11076>`__: ValueError: Unknown wave file format * `#11090 <https://github.com/scipy/scipy/issues/11090>`__: Misconception of the median absolute deviation in stats? * `#11095 <https://github.com/scipy/scipy/issues/11095>`__: BUG: find_peaks_cwt test failures in 32-bit Linux wheels * `#11107 <https://github.com/scipy/scipy/issues/11107>`__: scipy.io.mmread generated an error "TypeError: startswith first... * `#11123 <https://github.com/scipy/scipy/issues/11123>`__: Add wrapper for ?gttrf/?gttrs * `#11128 <https://github.com/scipy/scipy/issues/11128>`__: OverflowError in resample_poly (upfirdn) * `#11132 <https://github.com/scipy/scipy/issues/11132>`__: Possible bug: rv_discret.ppf for percentiles 0 and 100 and loc... * `#11163 <https://github.com/scipy/scipy/issues/11163>`__: Comparisons between scipy spmatrix and can sparse.SparseArray... * `#11168 <https://github.com/scipy/scipy/issues/11168>`__: Generalized Pareto variance inaccurate for concentrations near... * `#11169 <https://github.com/scipy/scipy/issues/11169>`__: Add wrapper for ?geqrfp * `#11184 <https://github.com/scipy/scipy/issues/11184>`__: 2-sided Kolmogorov Smirnov returns p-value of 1 * `#11185 <https://github.com/scipy/scipy/issues/11185>`__: The .roots() or solve() function of scipy.interpolate.CubicHermiteSpline... * `#11190 <https://github.com/scipy/scipy/issues/11190>`__: Add wrapper for ?tbtrs * `#11200 <https://github.com/scipy/scipy/issues/11200>`__: Can no longer slice csr_matrix in 1.3.0 * `#11207 <https://github.com/scipy/scipy/issues/11207>`__: _minimize_scalar_bounded: reference before assignment * `#11216 <https://github.com/scipy/scipy/issues/11216>`__: linprog: interior-point: Cholmod reordering can be reused * `#11223 <https://github.com/scipy/scipy/issues/11223>`__: Add wrappers for ?pttrf, ?pttrs * `#11224 <https://github.com/scipy/scipy/issues/11224>`__: Add wrapperfor ?pteqr * `#11235 <https://github.com/scipy/scipy/issues/11235>`__: MAINT: Missleading Error Message for IIR Filter * `#11244 <https://github.com/scipy/scipy/issues/11244>`__: Missing reference in \`scipy.optimize.line_search\` * `#11262 <https://github.com/scipy/scipy/issues/11262>`__: Hermitian Eigenvalue Problem eigh() API and wrapper change proposal * `#11266 <https://github.com/scipy/scipy/issues/11266>`__: Sparse matrix constructor data type detection changes on Numpy... * `#11270 <https://github.com/scipy/scipy/issues/11270>`__: CI failing: Travis CI Py36 refguide and Linux_Python_36_32bit_full... * `#11279 <https://github.com/scipy/scipy/issues/11279>`__: linalg.eigh checks whole array for finite values * `#11295 <https://github.com/scipy/scipy/issues/11295>`__: CI: azure does not auto-cancel old jobs on pushes * `#11299 <https://github.com/scipy/scipy/issues/11299>`__: stats.truncnorm.rvs 100x slower in v1.4.x than v1.3.3 * `#11315 <https://github.com/scipy/scipy/issues/11315>`__: BUG: special: rgamma on negative integers smaller -34 * `#11319 <https://github.com/scipy/scipy/issues/11319>`__: Missing \`int64_t\` declaration in rectangular_lsap.cpp * `#11323 <https://github.com/scipy/scipy/issues/11323>`__: Compilation failure due to missing symbol pthread_atfork * `#11332 <https://github.com/scipy/scipy/issues/11332>`__: BUG: directed_hausdorff distance on sets u and v when u is a... * `#11350 <https://github.com/scipy/scipy/issues/11350>`__: Khatri-Rao product * `#11354 <https://github.com/scipy/scipy/issues/11354>`__: ENH: Add wrapper for ?gejsv * `#11361 <https://github.com/scipy/scipy/issues/11361>`__: Dropped NaN in eval_genlaguerre function * `#11363 <https://github.com/scipy/scipy/issues/11363>`__: Dropped NaN in hyperu function * `#11365 <https://github.com/scipy/scipy/issues/11365>`__: scipy.stats.binned_statistic regressed in v1.4.0 * `#11369 <https://github.com/scipy/scipy/issues/11369>`__: Dropped NaN in eval_hermite * `#11370 <https://github.com/scipy/scipy/issues/11370>`__: Dropped NaN in eval_gegenbauer * `#11373 <https://github.com/scipy/scipy/issues/11373>`__: Add wrapper for ?gtsvx * `#11374 <https://github.com/scipy/scipy/issues/11374>`__: Add wrapper for ?ptsvx * `#11391 <https://github.com/scipy/scipy/issues/11391>`__: csgraph.minimum_spanning_tree loses precision * `#11398 <https://github.com/scipy/scipy/issues/11398>`__: Update stats to cope with \`np.random.Generator\` machinery * `#11412 <https://github.com/scipy/scipy/issues/11412>`__: Array copying causes unwanted type casting from complex to float... * `#11415 <https://github.com/scipy/scipy/issues/11415>`__: Where is the Wiener Filter derived from? * `#11416 <https://github.com/scipy/scipy/issues/11416>`__: _lib._util.getargspec_no_self is missing KEYWORD_ONLY support * `#11428 <https://github.com/scipy/scipy/issues/11428>`__: Documentation on SHGO inequality constraints appears contradictory * `#11429 <https://github.com/scipy/scipy/issues/11429>`__: Add LAPACK's ZUNCSD cosine sine decomposition * `#11438 <https://github.com/scipy/scipy/issues/11438>`__: run_dualannealing passes bounds incorrectly in benchmarks/optimize.py * `#11441 <https://github.com/scipy/scipy/issues/11441>`__: Can't run optimize benchmarks * `#11442 <https://github.com/scipy/scipy/issues/11442>`__: Chebyshev weights * `#11448 <https://github.com/scipy/scipy/issues/11448>`__: Wrongly typed comparison in integrate.quad * `#11458 <https://github.com/scipy/scipy/issues/11458>`__: BUG: maximum_bipartite_matching produces infeasible solution * `#11460 <https://github.com/scipy/scipy/issues/11460>`__: CI failing: 2 Travis CI tests fail with numpy build or version... * `#11462 <https://github.com/scipy/scipy/issues/11462>`__: Bug on "++" initialization on "kmeans2" * `#11464 <https://github.com/scipy/scipy/issues/11464>`__: Shouldn't data type of KDE evaluation should be like in the input... * `#11468 <https://github.com/scipy/scipy/issues/11468>`__: performance of binned_statistics_2d 100x slowdown from 1.3.2... * `#11484 <https://github.com/scipy/scipy/issues/11484>`__: Callback function doesn't give the same value as the one being... * `#11492 <https://github.com/scipy/scipy/issues/11492>`__: Confusing dendrogram labelling * `#11493 <https://github.com/scipy/scipy/issues/11493>`__: scipy.optimize.least_squares fails if the return array of the... * `#11494 <https://github.com/scipy/scipy/issues/11494>`__: Error performing kronecker product between large sparse vectors * `#11503 <https://github.com/scipy/scipy/issues/11503>`__: medfilt produces 0 on input of length 1 * `#11529 <https://github.com/scipy/scipy/issues/11529>`__: Pyflakes generates almost 700 warnings. * `#11566 <https://github.com/scipy/scipy/issues/11566>`__: irfft/irfft2/irfftn docs are slightly confusing re: input type. * `#11572 <https://github.com/scipy/scipy/issues/11572>`__: least_squares: too small tolerances not catched with method='lm' * `#11581 <https://github.com/scipy/scipy/issues/11581>`__: DOC: scipy.interpolate.RectSphereBivariateSpline * `#11586 <https://github.com/scipy/scipy/issues/11586>`__: Differential evolution breaks with LinearConstraints with sparse... * `#11595 <https://github.com/scipy/scipy/issues/11595>`__: scipy.spatial.cKDTree construction slow for some datasets * `#11598 <https://github.com/scipy/scipy/issues/11598>`__: output of special.voigt_profile when sigma=0 * `#11601 <https://github.com/scipy/scipy/issues/11601>`__: linalg tests failing in runtests.py * `#11602 <https://github.com/scipy/scipy/issues/11602>`__: scipy.optimize.linear_sum_assignment returns reverse diagonal... * `#11610 <https://github.com/scipy/scipy/issues/11610>`__: Analytic formula for normal moments * `#11611 <https://github.com/scipy/scipy/issues/11611>`__: Build failure with gfortran 10 * `#11613 <https://github.com/scipy/scipy/issues/11613>`__: TST, MAINT: test_quadpack TestCtypesQuad wasn't fully migrated... * `#11630 <https://github.com/scipy/scipy/issues/11630>`__: SmoothBivariateSpline bbox parameter * `#11635 <https://github.com/scipy/scipy/issues/11635>`__: typo in docstring of scipy.stats.norminvgauss * `#11637 <https://github.com/scipy/scipy/issues/11637>`__: BUG: core dumps when calling scipy.interpolate.interp1d with... * `#11638 <https://github.com/scipy/scipy/issues/11638>`__: better documentation for 'return_all' option in minimize(Nelder... * `#11652 <https://github.com/scipy/scipy/issues/11652>`__: TST, MAINT: CI failures for pre-release NumPy wheels * `#11659 <https://github.com/scipy/scipy/issues/11659>`__: optimize.fmin_l_bfgs_b needs bound check and appropiate error... * `#11660 <https://github.com/scipy/scipy/issues/11660>`__: BUG/ENH: distribution.ncf with nc=0 returns nan * `#11661 <https://github.com/scipy/scipy/issues/11661>`__: scipy.ndimage.convolve1d and correlate1d don't behave properly... * `#11669 <https://github.com/scipy/scipy/issues/11669>`__: p-value varies with the order of the data * `#11676 <https://github.com/scipy/scipy/issues/11676>`__: documentation of scipy.spatial.HalfspaceIntersection: wrong method... * `#11685 <https://github.com/scipy/scipy/issues/11685>`__: Rotation cannot be expressed as matrix * `#11686 <https://github.com/scipy/scipy/issues/11686>`__: MAINT: mypy imports of Cython "modules" * `#11693 <https://github.com/scipy/scipy/issues/11693>`__: TestDifferentialEvolutionSolver::test_L4 failing in CI * `#11696 <https://github.com/scipy/scipy/issues/11696>`__: DOC: incorrect compiler information for macOS in docs * `#11709 <https://github.com/scipy/scipy/issues/11709>`__: eigh() tests fail to pass, crash Python with seemingly ramdom... * `#11763 <https://github.com/scipy/scipy/issues/11763>`__: Small error in gamma continuous rv fit comments * `#11769 <https://github.com/scipy/scipy/issues/11769>`__: truncnorm.rvs Weird Behaviors * `#11770 <https://github.com/scipy/scipy/issues/11770>`__: crash in TestEigh::test_value_subsets * `#11795 <https://github.com/scipy/scipy/issues/11795>`__: trapz distribution mean computed using single precision * `#11800 <https://github.com/scipy/scipy/issues/11800>`__: Segmentation fault in scipy.odr for multidimensional independent... * `#11811 <https://github.com/scipy/scipy/issues/11811>`__: pyflakes silently failing on travis-ci * `#11826 <https://github.com/scipy/scipy/issues/11826>`__: Error with _fblas * `#11827 <https://github.com/scipy/scipy/issues/11827>`__: \`fft.tests.test_numpy.test_multiprocess\` hangs on Python3.8... * `#11835 <https://github.com/scipy/scipy/issues/11835>`__: tests with \`multiprocessing\` hang on Python 3.8 on macOS * `#11839 <https://github.com/scipy/scipy/issues/11839>`__: linalg.expm returns nans with RuntimeWarning: overflow encountered... * `#11856 <https://github.com/scipy/scipy/issues/11856>`__: Documentation of fit methods for \`weibull_min\` and \`exponweib\`... * `#11868 <https://github.com/scipy/scipy/issues/11868>`__: Function always evaluated twice when using HessianUpdateStrategy... * `#11875 <https://github.com/scipy/scipy/issues/11875>`__: Typo in the docstring of simps() * `#11877 <https://github.com/scipy/scipy/issues/11877>`__: kmeans2 '++' method is orders of magnitude slower than sklearn.cluster.KMeans() * `#11884 <https://github.com/scipy/scipy/issues/11884>`__: The upper code lines are dead code * `#11886 <https://github.com/scipy/scipy/issues/11886>`__: Array shape mismatch in scipy.optimize * `#11892 <https://github.com/scipy/scipy/issues/11892>`__: BUG: stats: Incorrect handling of edges cases by ttest_rel and... * `#11908 <https://github.com/scipy/scipy/issues/11908>`__: LinearOperator should have ndim attribute * `#11910 <https://github.com/scipy/scipy/issues/11910>`__: Documentation missing for what M is in init argument * `#11922 <https://github.com/scipy/scipy/issues/11922>`__: macOS actions CI has started failing in last couple of days. * `#11928 <https://github.com/scipy/scipy/issues/11928>`__: DOC: signal: Wrong description for sepfir2d, cspline2d, qspline2d * `#11944 <https://github.com/scipy/scipy/issues/11944>`__: curve_fit documentation unclear on default value of absolute_sigma * `#11945 <https://github.com/scipy/scipy/issues/11945>`__: Add a (potentially temporary) py.typed file? * `#11949 <https://github.com/scipy/scipy/issues/11949>`__: ValueError 'k exceeds matrix dimensions' for sparse.diagonal()... * `#11951 <https://github.com/scipy/scipy/issues/11951>`__: BUG: asv benchmark failed because of cython version * `#11967 <https://github.com/scipy/scipy/issues/11967>`__: BLD: Azure windows runs complain about drives * `#11973 <https://github.com/scipy/scipy/issues/11973>`__: oaconvolve(a,b,'same') differs in shape from convolve(a,b,'same')... * `#12002 <https://github.com/scipy/scipy/issues/12002>`__: pybind11 license * `#12003 <https://github.com/scipy/scipy/issues/12003>`__: MAINT: circular SphericalVoronoi input * `#12015 <https://github.com/scipy/scipy/issues/12015>`__: Reordering of CSC matrix breaks when you go above int32 limits * `#12031 <https://github.com/scipy/scipy/issues/12031>`__: Documentation Rendering Issues Visible in CircleCI Artifacts * `#12037 <https://github.com/scipy/scipy/issues/12037>`__: MAINT, CI: new Cython 3.0a4 issue * `#12087 <https://github.com/scipy/scipy/issues/12087>`__: DOC: some odr models are missing docs * `#12119 <https://github.com/scipy/scipy/issues/12119>`__: signal.fftconvolve no longer convolves types f8 and numpy.float64 * `#12149 <https://github.com/scipy/scipy/issues/12149>`__: Documentation of Rosenbrock function * `#12173 <https://github.com/scipy/scipy/issues/12173>`__: Large memory usage when indexing sparse matrices with \`np.ix_\` * `#12178 <https://github.com/scipy/scipy/issues/12178>`__: BUG: stats: Some discrete distributions don't accept lists of... * `#12220 <https://github.com/scipy/scipy/issues/12220>`__: BUG, REL: gh_lists.py compromised scraping * `#12239 <https://github.com/scipy/scipy/issues/12239>`__: BUG: median absolute deviation handling of nan Pull requests for 1.5.0 ------------------------------ * `#6510 <https://github.com/scipy/scipy/pull/6510>`__: Add Eigenvalue Range Functionality for Symmetric Eigenvalue Problems * `#9525 <https://github.com/scipy/scipy/pull/9525>`__: BUG: SuperLU 'NATURAL' order applies a column permutation * `#9634 <https://github.com/scipy/scipy/pull/9634>`__: Add the number of Jacobian evaluations to the output of L-BFGS-B. * `#9719 <https://github.com/scipy/scipy/pull/9719>`__: ENH: Added kstwo probability distribution for two-sided one-sample... * `#9783 <https://github.com/scipy/scipy/pull/9783>`__: WIP: optimize: added (dense) interpolative decomposition redundancy... * `#10053 <https://github.com/scipy/scipy/pull/10053>`__: Adding docstring to weibull_min and weibull_max based on issue... * `#10136 <https://github.com/scipy/scipy/pull/10136>`__: DEP: Add warning to linprog_verbose_callback * `#10380 <https://github.com/scipy/scipy/pull/10380>`__: ENH: add geometric_slerp * `#10602 <https://github.com/scipy/scipy/pull/10602>`__: MAINT: optimize: refactor common linprog arguments into namedtuple * `#10648 <https://github.com/scipy/scipy/pull/10648>`__: Bounds for the Powell minimization method * `#10673 <https://github.com/scipy/scipy/pull/10673>`__: ENH: approx_fprime --> approx_derivative * `#10759 <https://github.com/scipy/scipy/pull/10759>`__: ENH: calculation of region areas in spatial.SphericalVoronoi * `#10762 <https://github.com/scipy/scipy/pull/10762>`__: BENCH: optimize: more comprehensive linprog benchmarking * `#10796 <https://github.com/scipy/scipy/pull/10796>`__: ENH exact p-values of wilcoxon test in scipy.stats * `#10797 <https://github.com/scipy/scipy/pull/10797>`__: ENH: linalg: LU with full pivoting (wrappers for ?getc2/?gesc2) * `#10824 <https://github.com/scipy/scipy/pull/10824>`__: ENH: Fast gaussian kernel estimator * `#10942 <https://github.com/scipy/scipy/pull/10942>`__: BUG: prevent bound violation in L-BFGS-B optimize method * `#11003 <https://github.com/scipy/scipy/pull/11003>`__: ENH: add scipy.linalg.convolution_matrix * `#11023 <https://github.com/scipy/scipy/pull/11023>`__: improving error message for cubic-interpolate with duplicates * `#11045 <https://github.com/scipy/scipy/pull/11045>`__: MAINT: make bdt{r,rc,ri}() functions accept double n,k args +... * `#11063 <https://github.com/scipy/scipy/pull/11063>`__: Fix documentation error in optimize.minimize * `#11069 <https://github.com/scipy/scipy/pull/11069>`__: ENH: stats.dlaplace.rvs improvements * `#11071 <https://github.com/scipy/scipy/pull/11071>`__: DOC: Added examples to maximum_position in ndimage * `#11075 <https://github.com/scipy/scipy/pull/11075>`__: DOC: Update stylistic consistency in multiple files * `#11097 <https://github.com/scipy/scipy/pull/11097>`__: BUG: stats: fixing chisquare to return correct results for arrays... * `#11110 <https://github.com/scipy/scipy/pull/11110>`__: ENH: special: Cythonise erfinv, erfcinv * `#11112 <https://github.com/scipy/scipy/pull/11112>`__: BUG: special: Return NaN outside the domain of \`eval_hermite\` * `#11114 <https://github.com/scipy/scipy/pull/11114>`__: BUG: special: fix \`hyp1f1\` for nonnegative integral \`a\` and... * `#11115 <https://github.com/scipy/scipy/pull/11115>`__: DOC: special: add docstrings for \`kei\`, \`ker\`, \`keip\`,... * `#11130 <https://github.com/scipy/scipy/pull/11130>`__: ENH: support for circular input * `#11136 <https://github.com/scipy/scipy/pull/11136>`__: BUG: expm handling of empty input * `#11138 <https://github.com/scipy/scipy/pull/11138>`__: DOC: stylistic consistency, punctuation, etc. * `#11139 <https://github.com/scipy/scipy/pull/11139>`__: MAINT: cluster: use cython_blas, remove handwritten BLAS wrappers * `#11146 <https://github.com/scipy/scipy/pull/11146>`__: DOC: update docs on bp parameter for detrend * `#11151 <https://github.com/scipy/scipy/pull/11151>`__: DOC: special: add docstrings for \`bei\`, \`ber\`, \`beip\`,... * `#11156 <https://github.com/scipy/scipy/pull/11156>`__: ENH: add input validation for ellipord. * `#11157 <https://github.com/scipy/scipy/pull/11157>`__: DOC: stylistic revision, punctuation, consistency * `#11160 <https://github.com/scipy/scipy/pull/11160>`__: ignore warning on 0 \* inf in basin hopping * `#11162 <https://github.com/scipy/scipy/pull/11162>`__: DOC: minor stylistic revision, undo changes * `#11164 <https://github.com/scipy/scipy/pull/11164>`__: ENH/ BUG: Pydata sparse equality * `#11171 <https://github.com/scipy/scipy/pull/11171>`__: Fix dtype validation of "seuclidean" metric V parameter * `#11177 <https://github.com/scipy/scipy/pull/11177>`__: BUG: stats: Improve genpareto stats calculations. * `#11180 <https://github.com/scipy/scipy/pull/11180>`__: MAINT: stats: Some clean up in test_distributions.py. * `#11187 <https://github.com/scipy/scipy/pull/11187>`__: ENH: add functionality log_softmax to SciPy.special. * `#11188 <https://github.com/scipy/scipy/pull/11188>`__: MAINT: add rvs method to argus in scipy.stats * `#11196 <https://github.com/scipy/scipy/pull/11196>`__: DOC: special: add to docstrings of Kelvin zeros functions * `#11202 <https://github.com/scipy/scipy/pull/11202>`__: BUG: fix edge counting in shortest_path * `#11218 <https://github.com/scipy/scipy/pull/11218>`__: BUG: scipy/interpolate: fix PPoly/Cubic\*Spline roots() extrapolation... * `#11225 <https://github.com/scipy/scipy/pull/11225>`__: Add a warning to constant input for spearmanr() function * `#11226 <https://github.com/scipy/scipy/pull/11226>`__: Speed up of interior-point method for cholesky solver * `#11229 <https://github.com/scipy/scipy/pull/11229>`__: BUG: Explicit dtype specification in _upfirdn.py * `#11230 <https://github.com/scipy/scipy/pull/11230>`__: Additional citation for optimize tutorial * `#11231 <https://github.com/scipy/scipy/pull/11231>`__: Adds SLSQP test for duplicate f-evals (#10738) * `#11236 <https://github.com/scipy/scipy/pull/11236>`__: MAINT: Improved error message for Wn range in iirfilter. * `#11245 <https://github.com/scipy/scipy/pull/11245>`__: ENH: optimize: dense redundancy removal routine optimizations * `#11247 <https://github.com/scipy/scipy/pull/11247>`__: MAINT: Remove _lib/_numpy_compat.py * `#11248 <https://github.com/scipy/scipy/pull/11248>`__: BUG: rv_discrete.ppf() to handle loc * `#11251 <https://github.com/scipy/scipy/pull/11251>`__: DOC: add reference for linesearch zoom algorithm * `#11253 <https://github.com/scipy/scipy/pull/11253>`__: BUG: fix kendalltau issue where p-value becomes >1 * `#11254 <https://github.com/scipy/scipy/pull/11254>`__: MAINT: make special.factorial handle nan correctly * `#11256 <https://github.com/scipy/scipy/pull/11256>`__: DOC: Updated documentation for scipy.linalg.qr * `#11265 <https://github.com/scipy/scipy/pull/11265>`__: Fix: Can no longer slice csr_matrix in 1.3.0 * `#11267 <https://github.com/scipy/scipy/pull/11267>`__: BUG: Rework the scaling in the ks_2samp two-sided exact test. * `#11268 <https://github.com/scipy/scipy/pull/11268>`__: DOC: example of NonLinearConstraint * `#11269 <https://github.com/scipy/scipy/pull/11269>`__: Fix: Sparse matrix constructor data type detection changes on... * `#11276 <https://github.com/scipy/scipy/pull/11276>`__: BLD: update minimum Python, NumPy, Cython, Pybind11 versions * `#11277 <https://github.com/scipy/scipy/pull/11277>`__: MAINT: Cleanup conditionals for unsupported numpy verisons * `#11278 <https://github.com/scipy/scipy/pull/11278>`__: MAINT: Cleanup stats.iqr workarounds for unsupported NumPy versions * `#11282 <https://github.com/scipy/scipy/pull/11282>`__: TST/CI: improve traceback formatting for test failures * `#11284 <https://github.com/scipy/scipy/pull/11284>`__: fix docs & behavior for mode sequences in ndimage filters * `#11285 <https://github.com/scipy/scipy/pull/11285>`__: DOC: special: complete the docstrings of Chi-square functions * `#11286 <https://github.com/scipy/scipy/pull/11286>`__: BUG: make loadmat/savemat file opening close resources correctly * `#11287 <https://github.com/scipy/scipy/pull/11287>`__: CI: skip Azure and TravisCI builds on merges and direct pushes... * `#11288 <https://github.com/scipy/scipy/pull/11288>`__: DOC: Fix import in scipy.io.wavfile.read sample code * `#11289 <https://github.com/scipy/scipy/pull/11289>`__: BUG: Use context manager for open * `#11290 <https://github.com/scipy/scipy/pull/11290>`__: MAINT: Remove _lib._version in favour of _lib._pep440 * `#11292 <https://github.com/scipy/scipy/pull/11292>`__: DOC: special: add docstrings for various convenience functions * `#11293 <https://github.com/scipy/scipy/pull/11293>`__: DOC: special: fix typo in \`chdtri\` docstring * `#11296 <https://github.com/scipy/scipy/pull/11296>`__: DOC: special: add to docstrings of Bessel zeros and derivatives * `#11297 <https://github.com/scipy/scipy/pull/11297>`__: DOC: special: add parameters/returns sections for Bessel integrals * `#11300 <https://github.com/scipy/scipy/pull/11300>`__: MAINT: Update vendored uarray version * `#11301 <https://github.com/scipy/scipy/pull/11301>`__: CI: azure conditions should require succeeded() * `#11302 <https://github.com/scipy/scipy/pull/11302>`__: ENH: build infrastructure for ILP64 BLAS + ARPACK conversion * `#11303 <https://github.com/scipy/scipy/pull/11303>`__: DOC: special: fix typo in \`besselpoly\` docstring * `#11304 <https://github.com/scipy/scipy/pull/11304>`__: ENH: MAINT: Rewrite of eigh() and relevant wrappers * `#11306 <https://github.com/scipy/scipy/pull/11306>`__: TST: skip test_aligned_mem linalg test that is crashing on ppcle64 * `#11307 <https://github.com/scipy/scipy/pull/11307>`__: MAINT: Fix typo 'solutuion' -> 'solution' * `#11308 <https://github.com/scipy/scipy/pull/11308>`__: ENH: do not create 1d array out of a scalar * `#11310 <https://github.com/scipy/scipy/pull/11310>`__: MAINT: clean up object array creation, scalar/1d confusion * `#11311 <https://github.com/scipy/scipy/pull/11311>`__: DOC: Specify custom callable option for metric in cluster.hierarchy.fclusterdata * `#11316 <https://github.com/scipy/scipy/pull/11316>`__: BUG: special: fix behavior for \`rgamma\` zeros * `#11317 <https://github.com/scipy/scipy/pull/11317>`__: BUG: fix floating-point literal comparisons under C99 * `#11318 <https://github.com/scipy/scipy/pull/11318>`__: TST: optimize: mark two linprog tests for skipping * `#11320 <https://github.com/scipy/scipy/pull/11320>`__: BUG: Include \`int64_t\` declaration to \`rectangular_lsap.cpp\` * `#11330 <https://github.com/scipy/scipy/pull/11330>`__: MAINT: Update vendored pypocketfft version * `#11333 <https://github.com/scipy/scipy/pull/11333>`__: BUG: directed_hausdorff subset fix * `#11335 <https://github.com/scipy/scipy/pull/11335>`__: [ENH] sparse: Loosen check for sparse outer indexing fast path * `#11337 <https://github.com/scipy/scipy/pull/11337>`__: Undefined name 'e' in pavement.py * `#11338 <https://github.com/scipy/scipy/pull/11338>`__: scipyoptdoc.py: Remove unused variable 'sixu' * `#11340 <https://github.com/scipy/scipy/pull/11340>`__: xrange() was removed in Python 3 in favor of range() * `#11342 <https://github.com/scipy/scipy/pull/11342>`__: range() was removed in Py3 in _binned_statistic.py * `#11343 <https://github.com/scipy/scipy/pull/11343>`__: BUG: constants: fix 'exact' values table * `#11347 <https://github.com/scipy/scipy/pull/11347>`__: ENH: add input validation function and apply it to needed functions * `#11348 <https://github.com/scipy/scipy/pull/11348>`__: MAINT: remove six.string_types usages * `#11349 <https://github.com/scipy/scipy/pull/11349>`__: MAINT: minor doc fix _minimize_trustregion_constr * `#11353 <https://github.com/scipy/scipy/pull/11353>`__: MAINT: py3 remove various six usages * `#11358 <https://github.com/scipy/scipy/pull/11358>`__: ENH: optimize: Use CSR format instead of LIL for speed * `#11362 <https://github.com/scipy/scipy/pull/11362>`__: MAINT: sys.version_info >= 3.5 * `#11364 <https://github.com/scipy/scipy/pull/11364>`__: ENH: cache square of sums for f_oneway * `#11368 <https://github.com/scipy/scipy/pull/11368>`__: ENH: add optional argument, "include_nyquist", for freqz() * `#11372 <https://github.com/scipy/scipy/pull/11372>`__: BENCH: optimize: added linprog presolve benchmarks * `#11376 <https://github.com/scipy/scipy/pull/11376>`__: ENH: Add wrapper for ?gttrf/?gttrs * `#11377 <https://github.com/scipy/scipy/pull/11377>`__: MAINT: Remove Python 2 code from tools/authors.py * `#11378 <https://github.com/scipy/scipy/pull/11378>`__: ENH (WIP): Python wrapper for ?tbtrs * `#11379 <https://github.com/scipy/scipy/pull/11379>`__: MAINT: Remove six.with_metaclass from benchmarks/cython_special.py * `#11380 <https://github.com/scipy/scipy/pull/11380>`__: BUG: sparse/isolve: bicg and qmr don't treat x0 correctly * `#11382 <https://github.com/scipy/scipy/pull/11382>`__: MAINT: remove error throw in binned_statistic_dd() on non-finite... * `#11383 <https://github.com/scipy/scipy/pull/11383>`__: MAINT: _lib: remove py2 compat shims in getargspec * `#11384 <https://github.com/scipy/scipy/pull/11384>`__: MAINT: Use numpy scalar types directly * `#11385 <https://github.com/scipy/scipy/pull/11385>`__: ENH: special: add spherical Bessel functions to \`cython_special\` * `#11389 <https://github.com/scipy/scipy/pull/11389>`__: MAINT: line.startswith shouldn't be bytes * `#11393 <https://github.com/scipy/scipy/pull/11393>`__: ENH: Speed up truncnorm's ppf()and rvs() methods * `#11394 <https://github.com/scipy/scipy/pull/11394>`__: MAINT: Remove self._size (and self._random_state) from stats... * `#11395 <https://github.com/scipy/scipy/pull/11395>`__: correction in error message (%d->%g format) * `#11396 <https://github.com/scipy/scipy/pull/11396>`__: DOC: revert gh10540, removing mtrand * `#11397 <https://github.com/scipy/scipy/pull/11397>`__: MAINT: differential_evolution accepts np.random.Generator * `#11402 <https://github.com/scipy/scipy/pull/11402>`__: ENH: stats can use np.random.Generator * `#11404 <https://github.com/scipy/scipy/pull/11404>`__: ENH: add docstring of butter() for transfer function syntax problem * `#11405 <https://github.com/scipy/scipy/pull/11405>`__: DOC: Fix "see also" for SmoothBivariateSpline * `#11408 <https://github.com/scipy/scipy/pull/11408>`__: ENH: Add a \`plan\` argument to FFT functions in \`scipy.fft\` * `#11411 <https://github.com/scipy/scipy/pull/11411>`__: MAINT: check minimize duplicate evaluations * `#11418 <https://github.com/scipy/scipy/pull/11418>`__: ENH: Linalg: Python wrapper for ?geqrfp * `#11419 <https://github.com/scipy/scipy/pull/11419>`__: TST: Python 3.7 mac OS gcc multibuild fix * `#11423 <https://github.com/scipy/scipy/pull/11423>`__: ENH: Add tool to lint diffs * `#11425 <https://github.com/scipy/scipy/pull/11425>`__: FIX: _array_newton should preserve complex inputs * `#11426 <https://github.com/scipy/scipy/pull/11426>`__: MAINT: licence for global optimization benchmarks * `#11431 <https://github.com/scipy/scipy/pull/11431>`__: Make median_absolute_deviation scale argument aligned w/iqr * `#11432 <https://github.com/scipy/scipy/pull/11432>`__: Fix error message typo * `#11433 <https://github.com/scipy/scipy/pull/11433>`__: DOC: Remove L from longs * `#11434 <https://github.com/scipy/scipy/pull/11434>`__: MAINT: Python3 improvements to refguide_check.py * `#11435 <https://github.com/scipy/scipy/pull/11435>`__: DOC: Update runtest --parallel help * `#11436 <https://github.com/scipy/scipy/pull/11436>`__: MAINT: Remove checks for sys.version < 3.5 * `#11437 <https://github.com/scipy/scipy/pull/11437>`__: DOC: Fix documentation issue * `#11439 <https://github.com/scipy/scipy/pull/11439>`__: Support path objects (PEP 519) in mmio functions * `#11440 <https://github.com/scipy/scipy/pull/11440>`__: correct bounds pass in run_dualannealing for benchmarks/optimize.py * `#11443 <https://github.com/scipy/scipy/pull/11443>`__: BENCH: optimize_linprog remove ImportError exception * `#11453 <https://github.com/scipy/scipy/pull/11453>`__: BUG: sparse: convert csc/csr indices to int64 as needed * `#11454 <https://github.com/scipy/scipy/pull/11454>`__: DOC: Remove caveat on \`maximum_bipartite_matching\` * `#11455 <https://github.com/scipy/scipy/pull/11455>`__: BUG: Fix _lib._util.getargspec_no_self lack of KEYWORD_ONLY support. * `#11456 <https://github.com/scipy/scipy/pull/11456>`__: Implementation of khatri_rao product * `#11459 <https://github.com/scipy/scipy/pull/11459>`__: BUG: fix augmentation being broken in maximum_bipartite_matching * `#11461 <https://github.com/scipy/scipy/pull/11461>`__: MAINT: minor spelling corrections in comments in SciPy.sparse.linalg.arpack * `#11467 <https://github.com/scipy/scipy/pull/11467>`__: [MRG] Make result data type of KDE evaluation like in the input... * `#11469 <https://github.com/scipy/scipy/pull/11469>`__: Update integrate.quad documentation * `#11472 <https://github.com/scipy/scipy/pull/11472>`__: Fixed result typo * `#11476 <https://github.com/scipy/scipy/pull/11476>`__: DOC: stats: Copy-edit the anderson docstring. * `#11478 <https://github.com/scipy/scipy/pull/11478>`__: ENH: avoid unnecessary array copies in matrix product * `#11481 <https://github.com/scipy/scipy/pull/11481>`__: BUG: Make special.hyperu return nan if any argument is nan * `#11483 <https://github.com/scipy/scipy/pull/11483>`__: BUG: Fixed \`_kpp\` initialization on \`scipy.cluster.vq\`, closing... * `#11485 <https://github.com/scipy/scipy/pull/11485>`__: ENH: Update docstring of class KrylovJacobian to fix #2744 * `#11486 <https://github.com/scipy/scipy/pull/11486>`__: BUG: make special.eval_hermite return nan if second argument... * `#11487 <https://github.com/scipy/scipy/pull/11487>`__: ENH: improve docstring of correlate and correlate2d to fix #1968 * `#11488 <https://github.com/scipy/scipy/pull/11488>`__: FIX: change "func -> fun" of scipy.optimize _root.py to solve... * `#11489 <https://github.com/scipy/scipy/pull/11489>`__: BUG: fixes typo introduced in PR #11253 in stats.mstats.kendalltau() * `#11490 <https://github.com/scipy/scipy/pull/11490>`__: DOC: fix typo in scipy/io/matlab/mio4.py * `#11495 <https://github.com/scipy/scipy/pull/11495>`__: MAINT: refactor slsqp to fix issue in callback function * `#11498 <https://github.com/scipy/scipy/pull/11498>`__: [DOC] mention graph cuts in maximum flow docstring * `#11499 <https://github.com/scipy/scipy/pull/11499>`__: DOC: Improve documentation of scipy.signal.signaltools.wiener * `#11506 <https://github.com/scipy/scipy/pull/11506>`__: DOC: Fix typo in documentation of scipy.stats.morestats * `#11508 <https://github.com/scipy/scipy/pull/11508>`__: ENH: avoid copy on sparse __init__ when dtype is given * `#11509 <https://github.com/scipy/scipy/pull/11509>`__: ENH: avoid unnecessary array copies in matrix product (again) * `#11510 <https://github.com/scipy/scipy/pull/11510>`__: [DOC] An ex. for creating arbitrary size tri-diagonal * `#11511 <https://github.com/scipy/scipy/pull/11511>`__: TST: pin numba for Travis/sparse * `#11513 <https://github.com/scipy/scipy/pull/11513>`__: TST: disable NumPy cache dir ppc64le * `#11514 <https://github.com/scipy/scipy/pull/11514>`__: BUG: make special.eval_genlaguerre return nan if passed nan * `#11517 <https://github.com/scipy/scipy/pull/11517>`__: ENH: improve sparse.lil.tocsr performance * `#11519 <https://github.com/scipy/scipy/pull/11519>`__: Fix fresnel documentation * `#11520 <https://github.com/scipy/scipy/pull/11520>`__: BUG: make special.eval_gegenbauer return nan if passed nan * `#11524 <https://github.com/scipy/scipy/pull/11524>`__: ENH: Cosine Sine Decomposition * `#11526 <https://github.com/scipy/scipy/pull/11526>`__: BUG: fix SLSQP max iteration setting to fix #4921 * `#11527 <https://github.com/scipy/scipy/pull/11527>`__: ENH: improve docstring of weibull_min_gen and weibull_max_gen... * `#11530 <https://github.com/scipy/scipy/pull/11530>`__: MAINT: Removed 3 unused imports, 3 unused assignments from ndimage. * `#11531 <https://github.com/scipy/scipy/pull/11531>`__: DOC: fix typos in bdtr and bdtrc from gh PR 11045 * `#11532 <https://github.com/scipy/scipy/pull/11532>`__: MAINT: Fixed several unused imports and unused assignments from... * `#11533 <https://github.com/scipy/scipy/pull/11533>`__: MAINT: Fixed about 100 unused imports, unused assignment warnings... * `#11534 <https://github.com/scipy/scipy/pull/11534>`__: FIX: Allow non-native byte order inputs to scipy.fft * `#11535 <https://github.com/scipy/scipy/pull/11535>`__: MAINT: Fixed several unused imports in _lib. * `#11536 <https://github.com/scipy/scipy/pull/11536>`__: MAINT: Fixed several unused imports and unused assignments in... * `#11537 <https://github.com/scipy/scipy/pull/11537>`__: MAINT: Removed an unused import in scipy/constants. * `#11538 <https://github.com/scipy/scipy/pull/11538>`__: MAINT: Fixed several unused imports in scipy/fft. * `#11539 <https://github.com/scipy/scipy/pull/11539>`__: MAINT: Fixed several unused imports and unused assignments in... * `#11540 <https://github.com/scipy/scipy/pull/11540>`__: MAINT: Fixed two unused imports in scipy/misc. * `#11541 <https://github.com/scipy/scipy/pull/11541>`__: MAINT: Fixed several unused imports and unused assignments in... * `#11542 <https://github.com/scipy/scipy/pull/11542>`__: MAINT: Fixed an unused import in scipy/odr. * `#11543 <https://github.com/scipy/scipy/pull/11543>`__: MAINT: Fixed several unused imports and unused assignments in... * `#11544 <https://github.com/scipy/scipy/pull/11544>`__: MAINT: Fixed unused imports and unused assignments in scipy/integrate. * `#11545 <https://github.com/scipy/scipy/pull/11545>`__: MAINT: Removed unused imports and fixed unused assignments in... * `#11546 <https://github.com/scipy/scipy/pull/11546>`__: MAINT: Removed unused imports; fixed unused assignments in scipy/signal. * `#11547 <https://github.com/scipy/scipy/pull/11547>`__: MAINT: Removed unused imports; fixed unused assignments in scipy/spatial * `#11548 <https://github.com/scipy/scipy/pull/11548>`__: MAINT: Removed unused imports; fixed unused assignments in scipy.sparse. * `#11549 <https://github.com/scipy/scipy/pull/11549>`__: MAINT: Replace xrange with range * `#11560 <https://github.com/scipy/scipy/pull/11560>`__: MAINT: stats: remove an _argcheck call * `#11573 <https://github.com/scipy/scipy/pull/11573>`__: MAINT: Removed unused imports; fixed unused assignments in scipy/stats. * `#11574 <https://github.com/scipy/scipy/pull/11574>`__: MAINT: Small change to \`optimize.nnls\` error messages. * `#11575 <https://github.com/scipy/scipy/pull/11575>`__: MAINT: Update sytrd/hetrd tests * `#11582 <https://github.com/scipy/scipy/pull/11582>`__: MAINT: fix typo in quadpack.py closes #11448 * `#11585 <https://github.com/scipy/scipy/pull/11585>`__: TST: add openblas_support.py * `#11587 <https://github.com/scipy/scipy/pull/11587>`__: BUG: Differential evolution with LinearConstraint with sparse... * `#11588 <https://github.com/scipy/scipy/pull/11588>`__: MAINT: Fully display problem size in lsmr/lsqr. * `#11589 <https://github.com/scipy/scipy/pull/11589>`__: MAINT: Remove Python 2 workarounds * `#11590 <https://github.com/scipy/scipy/pull/11590>`__: MAINT: Remove Python2 module init * `#11605 <https://github.com/scipy/scipy/pull/11605>`__: Standardization of bounds in _linprog_util.py * `#11608 <https://github.com/scipy/scipy/pull/11608>`__: BUG: fix use of is in DE callback * `#11614 <https://github.com/scipy/scipy/pull/11614>`__: TST, MAINT: TestCtypesQuad skip with pytest * `#11619 <https://github.com/scipy/scipy/pull/11619>`__: ENH: add nan_policy argument and functionality to stats.mstats.winsorize * `#11621 <https://github.com/scipy/scipy/pull/11621>`__: MAINT: Cleanup uses of PY_VERSION_HEX, NPY_PY3K in ndimage * `#11622 <https://github.com/scipy/scipy/pull/11622>`__: MAINT: Cleanup uses of PY_VERSION_HEX, NPY_PY3K in sparse * `#11623 <https://github.com/scipy/scipy/pull/11623>`__: MAINT: Remove unnecessary 'from __future__ import ...' statements * `#11626 <https://github.com/scipy/scipy/pull/11626>`__: MAINT: Cleanup uses of PY_VERSION_HEX * `#11627 <https://github.com/scipy/scipy/pull/11627>`__: ENH: add analytic formula for normal moments * `#11628 <https://github.com/scipy/scipy/pull/11628>`__: MAINT, TST: adjust azure for matplotlib release * `#11631 <https://github.com/scipy/scipy/pull/11631>`__: Revert to old behaviour for constant cost matrices in \`linear_sum_assignment\` * `#11632 <https://github.com/scipy/scipy/pull/11632>`__: MAINT: Define ARRAY_ANYORDER with DEF instead of cdef * `#11639 <https://github.com/scipy/scipy/pull/11639>`__: BUG: interpolate/interp1d: fail gracefully on all-nan inputs * `#11640 <https://github.com/scipy/scipy/pull/11640>`__: MAINT: Fix BLAS3 trmm wrapper for "side" arg * `#11642 <https://github.com/scipy/scipy/pull/11642>`__: TST, MAINT: remove dead code in Travis CI * `#11643 <https://github.com/scipy/scipy/pull/11643>`__: MAINT: fix conversion in binom_test * `#11645 <https://github.com/scipy/scipy/pull/11645>`__: MAINT: Assorted clean up. * `#11646 <https://github.com/scipy/scipy/pull/11646>`__: MAINT: Remove unnecessary 'from __future__ import ...' statements * `#11647 <https://github.com/scipy/scipy/pull/11647>`__: DOC: document return_all arguments * `#11648 <https://github.com/scipy/scipy/pull/11648>`__: Perform geometric slerp in quaternion space * `#11651 <https://github.com/scipy/scipy/pull/11651>`__: DOC: Update paper URL in lambertw documentation * `#11653 <https://github.com/scipy/scipy/pull/11653>`__: PERF: Switch to C++ STL std::nth_element * `#11655 <https://github.com/scipy/scipy/pull/11655>`__: MAINT: Remove Python2 cStringStream * `#11657 <https://github.com/scipy/scipy/pull/11657>`__: ENH: Add wrapper for ?pttrf/?pttrs * `#11664 <https://github.com/scipy/scipy/pull/11664>`__: ENH: Add wrapper for ?gejsv * `#11665 <https://github.com/scipy/scipy/pull/11665>`__: ENH: Add wrapper for ?pteqr * `#11667 <https://github.com/scipy/scipy/pull/11667>`__: BUG: Non-central Fisher distribution (fix nan-values when nc=0) * `#11668 <https://github.com/scipy/scipy/pull/11668>`__: ENH: Add wrapper for ?gtsvx * `#11671 <https://github.com/scipy/scipy/pull/11671>`__: TST, CI: restore Azure temporarily * `#11672 <https://github.com/scipy/scipy/pull/11672>`__: Add warning to medfilt when array size < kernel_size * `#11674 <https://github.com/scipy/scipy/pull/11674>`__: TST: bump test precision for two np.dot related linalg tests. * `#11675 <https://github.com/scipy/scipy/pull/11675>`__: MAINT: pycodestyle clean-up * `#11677 <https://github.com/scipy/scipy/pull/11677>`__: ENH: Add wrapper for ?ptsvx * `#11679 <https://github.com/scipy/scipy/pull/11679>`__: BENCH: cKDTree benchmarks added: balanced/unbalanced tree (related... * `#11680 <https://github.com/scipy/scipy/pull/11680>`__: MAINT: rng_integers allows RandomState.randint or Generator.integers * `#11683 <https://github.com/scipy/scipy/pull/11683>`__: BUG: fix mode='mirror' on length 1 axes * `#11684 <https://github.com/scipy/scipy/pull/11684>`__: BUG: fix scipy.special.voigt_profile * `#11687 <https://github.com/scipy/scipy/pull/11687>`__: MAINT: sparse.linalg: avoid importing from \`np.core\` * `#11688 <https://github.com/scipy/scipy/pull/11688>`__: ENH: mypy: get specific about ignoring missing imports * `#11690 <https://github.com/scipy/scipy/pull/11690>`__: MAINT: mypy: fix errors about incompatible types in lists * `#11692 <https://github.com/scipy/scipy/pull/11692>`__: MAINT: mypy: fix remaining type errors * `#11694 <https://github.com/scipy/scipy/pull/11694>`__: TST, MAINT: bump to OpenBLAS 0.3.9 stable, raise tol for Win... * `#11697 <https://github.com/scipy/scipy/pull/11697>`__: DOC: fix pdf of norminvgauss in scipy.stats * `#11701 <https://github.com/scipy/scipy/pull/11701>`__: MAINT: special: add rudimentary types for \`_ufuncs\` extension... * `#11702 <https://github.com/scipy/scipy/pull/11702>`__: BUG: Fixed a post-merge bug for eigh() * `#11703 <https://github.com/scipy/scipy/pull/11703>`__: Improves docstring with consistent L2-norm * `#11705 <https://github.com/scipy/scipy/pull/11705>`__: DOC: Slerp the SphericalVoronoi docstring * `#11706 <https://github.com/scipy/scipy/pull/11706>`__: ENH: mypy: add \`--mypy\` option to \`runtests.py\` * `#11710 <https://github.com/scipy/scipy/pull/11710>`__: ENH: Modified stats.kstest() to use the exact stats.kstwo.sf()... * `#11715 <https://github.com/scipy/scipy/pull/11715>`__: DOC: add .. versionadded:: to as_matrix/from_matrix in spatial/transfâ€¦ * `#11716 <https://github.com/scipy/scipy/pull/11716>`__: BENCH: fix benchmark imports for \`\`optimize_linprog.py\`\` * `#11721 <https://github.com/scipy/scipy/pull/11721>`__: MAINT: io: Remove now-unnecessary \`# type: ignore\` * `#11722 <https://github.com/scipy/scipy/pull/11722>`__: MAINT: mypy: remove mpmath from the ratchet * `#11726 <https://github.com/scipy/scipy/pull/11726>`__: Handle constant input for scipy.stats.f_oneway * `#11729 <https://github.com/scipy/scipy/pull/11729>`__: BENCH: optimize: added infeasible benchmarks for linprog * `#11731 <https://github.com/scipy/scipy/pull/11731>`__: fix inaccurate information about Mac OS compiler (#11696) * `#11733 <https://github.com/scipy/scipy/pull/11733>`__: Fix inaccurate docstring example of HalfspaceIntersection * `#11734 <https://github.com/scipy/scipy/pull/11734>`__: Doc: fix inaccurate docstring of SmoothBivariateSpline. * `#11735 <https://github.com/scipy/scipy/pull/11735>`__: Bug: stats: fix wrong shape from median_absolute_deviation for... * `#11736 <https://github.com/scipy/scipy/pull/11736>`__: ENH: add input validations and its tests for FITPACK in fitpack2.py * `#11737 <https://github.com/scipy/scipy/pull/11737>`__: BUG: Prevent crashes due to MKL bug in ?heevr * `#11739 <https://github.com/scipy/scipy/pull/11739>`__: MAINT: special: add type stubs for \`_test_round.pyx\` * `#11740 <https://github.com/scipy/scipy/pull/11740>`__: MAINT: special: remove unused specfun f2py wrappers * `#11741 <https://github.com/scipy/scipy/pull/11741>`__: BUG: fix small tolerances handling for minpack and add a test. * `#11743 <https://github.com/scipy/scipy/pull/11743>`__: Doc: fix docstring of rfft, rfft2, rfftn, irfft, irfft2, irfftn... * `#11744 <https://github.com/scipy/scipy/pull/11744>`__: MAINT: Remove unused py3k.h code * `#11745 <https://github.com/scipy/scipy/pull/11745>`__: DOC: stats: Clean up ncf documentation. * `#11748 <https://github.com/scipy/scipy/pull/11748>`__: MAINT: special: type \`cython_special\` as \`Any\` * `#11750 <https://github.com/scipy/scipy/pull/11750>`__: MAINT: type hints for \`_spherical_voronoi\` * `#11752 <https://github.com/scipy/scipy/pull/11752>`__: DOC: fix docstring of scipy.optimize.least_squares * `#11753 <https://github.com/scipy/scipy/pull/11753>`__: ENH: add input validation for dendrogram and a test. * `#11755 <https://github.com/scipy/scipy/pull/11755>`__: MAINT: Replace uses of tostring with tobytes * `#11757 <https://github.com/scipy/scipy/pull/11757>`__: ENH: improve binned_statistics_2d performance. * `#11759 <https://github.com/scipy/scipy/pull/11759>`__: ENH: optimize: add HiGHS methods to linprog * `#11760 <https://github.com/scipy/scipy/pull/11760>`__: MAINT: Remove FileStream replaced by GenericStream * `#11761 <https://github.com/scipy/scipy/pull/11761>`__: MAINT: Replace npy_3kcompat.h shims * `#11765 <https://github.com/scipy/scipy/pull/11765>`__: TST: Speedup test_pascal which is VERY slow on Azure * `#11766 <https://github.com/scipy/scipy/pull/11766>`__: TST: speed up differential_evolution L8 test * `#11767 <https://github.com/scipy/scipy/pull/11767>`__: Change comment in continuous rv gamma fit function * `#11776 <https://github.com/scipy/scipy/pull/11776>`__: Add domain option for resample. * `#11784 <https://github.com/scipy/scipy/pull/11784>`__: BUG: Fixed calculation of nonzero elements in scipy.sparse.random * `#11786 <https://github.com/scipy/scipy/pull/11786>`__: ENH: stats: add axis keyword argument to scipy.stats.rankdata * `#11789 <https://github.com/scipy/scipy/pull/11789>`__: Doc: fix docstring of scipy.spatial.chebyshev * `#11792 <https://github.com/scipy/scipy/pull/11792>`__: DOC: dev: add guidelines for developing public Cython APIs * `#11794 <https://github.com/scipy/scipy/pull/11794>`__: MAINT: add comments explaining a problem in cython_optimize organization * `#11796 <https://github.com/scipy/scipy/pull/11796>`__: DOC: add a note about precision losing in csgraph.minimum_spanning_tree... * `#11797 <https://github.com/scipy/scipy/pull/11797>`__: ENH: Allow negative \`axis\` in \`interpolate.BSpline\`. Also... * `#11798 <https://github.com/scipy/scipy/pull/11798>`__: Add simplify_cells parameter to scipy.io.loadmat * `#11801 <https://github.com/scipy/scipy/pull/11801>`__: MAINT, DOC: minor changes of ratio-of-uniforms in scipy.stats * `#11802 <https://github.com/scipy/scipy/pull/11802>`__: BUG: fix scipy.odr to handle multidimensional independent and... * `#11803 <https://github.com/scipy/scipy/pull/11803>`__: scipy.stats.trapz: Use analytic formulas for stats and entropy. * `#11808 <https://github.com/scipy/scipy/pull/11808>`__: DOC: add Examples in the scipy.interpolate.interpn docstring. * `#11809 <https://github.com/scipy/scipy/pull/11809>`__: Duplicate entries are added together in csr_matrix constructor * `#11813 <https://github.com/scipy/scipy/pull/11813>`__: MAINT: bump pyflakes to version 2.1.1 * `#11814 <https://github.com/scipy/scipy/pull/11814>`__: BUG: scipy.sparse.csr doctest failing with incorrect output value * `#11817 <https://github.com/scipy/scipy/pull/11817>`__: DOC: add Examples in the scipy.optimize.leastsq docstring * `#11820 <https://github.com/scipy/scipy/pull/11820>`__: ENH: Raise an error on incorrect bounds format in optimize.fmin_l_bfgs_b * `#11822 <https://github.com/scipy/scipy/pull/11822>`__: CI: add github actions for macOS * `#11824 <https://github.com/scipy/scipy/pull/11824>`__: DOC: add Examples in scipy.optimize.line_search docstring (line_search_wolfe2) * `#11830 <https://github.com/scipy/scipy/pull/11830>`__: TST: Always use fork for multiprocessing in fft tests * `#11831 <https://github.com/scipy/scipy/pull/11831>`__: DOC: add Examples and Returns in scipy.misc.central_diff_weights... * `#11832 <https://github.com/scipy/scipy/pull/11832>`__: DOC: stats: Some small corrections to a couple docstrings. * `#11833 <https://github.com/scipy/scipy/pull/11833>`__: BUG: Fix compiler_name when there are paths used in flags * `#11836 <https://github.com/scipy/scipy/pull/11836>`__: MAINT: re-introduce multiprocessing tests on Python3.8 * `#11837 <https://github.com/scipy/scipy/pull/11837>`__: Doc: add Examples in scipy.optimize.fsolve docstring * `#11838 <https://github.com/scipy/scipy/pull/11838>`__: Doc: add Examples in scipy.sparse.linalg.minres docstring * `#11840 <https://github.com/scipy/scipy/pull/11840>`__: BUG: sparse.linalg: fix overflow in expm intermediate computation * `#11842 <https://github.com/scipy/scipy/pull/11842>`__: BLD: fix build with gfortran 10 * `#11843 <https://github.com/scipy/scipy/pull/11843>`__: MAINT: Simplify floats in constants.py * `#11847 <https://github.com/scipy/scipy/pull/11847>`__: DOC: add a tutorial of scipy.optimize.linprog * `#11849 <https://github.com/scipy/scipy/pull/11849>`__: ENH: speed up geninvgauss by using cython * `#11852 <https://github.com/scipy/scipy/pull/11852>`__: CI: remove osx from travisCI * `#11857 <https://github.com/scipy/scipy/pull/11857>`__: BUG: Change parameter fc of gausspulse to float. * `#11861 <https://github.com/scipy/scipy/pull/11861>`__: order = degree + 1 for splines * `#11863 <https://github.com/scipy/scipy/pull/11863>`__: Make g77 ABI wrapper work with gfortran ABI lapack * `#11866 <https://github.com/scipy/scipy/pull/11866>`__: MAINT: add type ignores to sympy and matplotlib imports * `#11867 <https://github.com/scipy/scipy/pull/11867>`__: CI: Add arm64 in travis-ci * `#11869 <https://github.com/scipy/scipy/pull/11869>`__: DOC: signal: Add an example to the lsim2 docstring. * `#11870 <https://github.com/scipy/scipy/pull/11870>`__: DOC: signal: Use impulse instead of impulse2 in the impulse example... * `#11871 <https://github.com/scipy/scipy/pull/11871>`__: ENH: type ufuncs in special as ufuncs instead of Any * `#11872 <https://github.com/scipy/scipy/pull/11872>`__: BUG: avoid recomputing in scipy.optimize.optimize.MemoizeJac * `#11873 <https://github.com/scipy/scipy/pull/11873>`__: DOC: signal: Fix ODE in impulse and impulse2 docstrings. * `#11874 <https://github.com/scipy/scipy/pull/11874>`__: DOC: add Examples of docstring for scipy.interpolate.approximate_taylor_polynomial * `#11878 <https://github.com/scipy/scipy/pull/11878>`__: DOC: fixed a typo under scipy/integrate/quadrature.py * `#11879 <https://github.com/scipy/scipy/pull/11879>`__: BUG: Fix index arrays overflow in sparse.kron * `#11880 <https://github.com/scipy/scipy/pull/11880>`__: DOC: stats: Add Examples for bartlett, fligner, levene. * `#11881 <https://github.com/scipy/scipy/pull/11881>`__: MAINT: normalise numpy-->np in optimize.py * `#11882 <https://github.com/scipy/scipy/pull/11882>`__: DOC: add Examples for scipy.io.readsav docstring. * `#11883 <https://github.com/scipy/scipy/pull/11883>`__: DOC: add Returns and Examples for scipy.ndimage.correlate() docstring * `#11885 <https://github.com/scipy/scipy/pull/11885>`__: BUG: stats: Handle multidimensional arrays in f_oneway, and more. * `#11889 <https://github.com/scipy/scipy/pull/11889>`__: DOC: signal: Unify lsim and lsim2 examples. * `#11896 <https://github.com/scipy/scipy/pull/11896>`__: BUG: stats: Fix handling of size 0 inputs for ttest_rel and ttest_ind. * `#11897 <https://github.com/scipy/scipy/pull/11897>`__: DOC: Remove misleading default values from fit method * `#11898 <https://github.com/scipy/scipy/pull/11898>`__: MAINT: LinearVectorFunction.J is ndarray closes #11886 * `#11902 <https://github.com/scipy/scipy/pull/11902>`__: BUG: linalg: test_heequb failure * `#11904 <https://github.com/scipy/scipy/pull/11904>`__: fix real-to-real transforms for complex inputs and overwrite_x=True * `#11906 <https://github.com/scipy/scipy/pull/11906>`__: DOC: stats: fix error caused by trapz docstring * `#11907 <https://github.com/scipy/scipy/pull/11907>`__: BUG: stats: fixed SEGFAULT from Issue #9710 * `#11912 <https://github.com/scipy/scipy/pull/11912>`__: ENH: Respect matplotlib color palette with hierarchy/dendrogram. * `#11914 <https://github.com/scipy/scipy/pull/11914>`__: DOC: refine doc for spatial.distance.squareform * `#11915 <https://github.com/scipy/scipy/pull/11915>`__: ENH: Ndim linear operator * `#11919 <https://github.com/scipy/scipy/pull/11919>`__: ENH: expose "window_size" parameter in find_peaks_cwt() * `#11920 <https://github.com/scipy/scipy/pull/11920>`__: DOC: explain M, diffev * `#11923 <https://github.com/scipy/scipy/pull/11923>`__: CI: macOS install swig closes #11922 * `#11924 <https://github.com/scipy/scipy/pull/11924>`__: DOC: add Examples for scipy.optimize.bracket() docstring * `#11930 <https://github.com/scipy/scipy/pull/11930>`__: DOC: add Examples and clean up for signal.qspline1d and signal.qspline_eval... * `#11931 <https://github.com/scipy/scipy/pull/11931>`__: DOC: add Examples for sparse.linalg.bicg docstring. * `#11933 <https://github.com/scipy/scipy/pull/11933>`__: DOC: Add original reference for Yao-Liu objective functions * `#11934 <https://github.com/scipy/scipy/pull/11934>`__: DOC, MAINT: mailmap update * `#11935 <https://github.com/scipy/scipy/pull/11935>`__: DOC: make scipy.stats.mode documentation reflect that the function... * `#11936 <https://github.com/scipy/scipy/pull/11936>`__: ENH: special: add type stubs for \`orthogonal.py\` * `#11937 <https://github.com/scipy/scipy/pull/11937>`__: DOC: Add docstring examples to fft2, ifft2, io.savemat * `#11938 <https://github.com/scipy/scipy/pull/11938>`__: MAINT: add helper function for deprecating Cython API functions * `#11942 <https://github.com/scipy/scipy/pull/11942>`__: MAINT: ignore conditional import in _lib/_util * `#11943 <https://github.com/scipy/scipy/pull/11943>`__: MAINT: special: add types for geterr/seterr/errstate * `#11946 <https://github.com/scipy/scipy/pull/11946>`__: MAINT: add py.typed marker * `#11950 <https://github.com/scipy/scipy/pull/11950>`__: TST:MAINT: separated and stabilized heequb tests * `#11952 <https://github.com/scipy/scipy/pull/11952>`__: DOC: update toolchain roadmap for py38, C99, C++11/14 * `#11957 <https://github.com/scipy/scipy/pull/11957>`__: MAINT: Use np.errstate context manager instead of np.seterr. * `#11958 <https://github.com/scipy/scipy/pull/11958>`__: MAINT: interpolate: Remove some trailing spaces. * `#11960 <https://github.com/scipy/scipy/pull/11960>`__: MAINT: Cleanup Python2 compatibility code * `#11961 <https://github.com/scipy/scipy/pull/11961>`__: MAINT: Remove numpy/npy_3kcompat.h from _superluobject.c * `#11962 <https://github.com/scipy/scipy/pull/11962>`__: DOC: Fix type of \`codes\` in docstring of \`_vq._vq()\` * `#11964 <https://github.com/scipy/scipy/pull/11964>`__: MAINT: Cleanup unused IS_PYPY * `#11969 <https://github.com/scipy/scipy/pull/11969>`__: DOC: add Examples and fix docstring for special.airye * `#11970 <https://github.com/scipy/scipy/pull/11970>`__: BUG: sparse: 'diagonal' of sparse matrices fixed to match numpy's... * `#11974 <https://github.com/scipy/scipy/pull/11974>`__: BUG: Reshape oaconvolve output even when no axes are convolved * `#11976 <https://github.com/scipy/scipy/pull/11976>`__: MAINT: add logo for github actions * `#11977 <https://github.com/scipy/scipy/pull/11977>`__: CI: test bleeding edge Python * `#11979 <https://github.com/scipy/scipy/pull/11979>`__: DOC: add Examples for stats.ranksums() docstring. * `#11982 <https://github.com/scipy/scipy/pull/11982>`__: Fix KMeans++ initialisation slowness * `#11983 <https://github.com/scipy/scipy/pull/11983>`__: DOC: add Examples for stats.mstats.argstoarray() docstring. * `#11986 <https://github.com/scipy/scipy/pull/11986>`__: Avoid bugs in ndimage when the output and input arrays overlap... * `#11988 <https://github.com/scipy/scipy/pull/11988>`__: ENH: Override fit method of Laplace distribution with Maximum... * `#11993 <https://github.com/scipy/scipy/pull/11993>`__: TST, CI: Azure Windows path fixups * `#11995 <https://github.com/scipy/scipy/pull/11995>`__: MAINT, CI: remove custom mingw Azure * `#11996 <https://github.com/scipy/scipy/pull/11996>`__: DOC: add Examples and fix pep warning for fft.set_global_backend... * `#11997 <https://github.com/scipy/scipy/pull/11997>`__: MAINT, CI: Azure OpenBLAS simplify * `#11998 <https://github.com/scipy/scipy/pull/11998>`__: BENCH: Run against current HEAD instead of master * `#12001 <https://github.com/scipy/scipy/pull/12001>`__: ENH: stats: Implement _logpdf for the maxwell distribution. * `#12004 <https://github.com/scipy/scipy/pull/12004>`__: DOC: add examples for integrate.quad_vec() and integrate.quad_explain() * `#12005 <https://github.com/scipy/scipy/pull/12005>`__: MAINT: Use helper functions in ?tbtrs tests * `#12007 <https://github.com/scipy/scipy/pull/12007>`__: MAINT: updated LICENSES_bundled for pybind11 and six * `#12008 <https://github.com/scipy/scipy/pull/12008>`__: DOC: roadmap update * `#12009 <https://github.com/scipy/scipy/pull/12009>`__: ENH: optimize: support 64-bit BLAS in lbfgsb * `#12010 <https://github.com/scipy/scipy/pull/12010>`__: ENH: sparse.linalg: support 64-bit BLAS in isolve * `#12012 <https://github.com/scipy/scipy/pull/12012>`__: DOC: add Examples for interpolate.barycentric_interpolate(),... * `#12013 <https://github.com/scipy/scipy/pull/12013>`__: MAINT: remove last uses of numpy.dual * `#12014 <https://github.com/scipy/scipy/pull/12014>`__: CI: print 10 slowest tests * `#12020 <https://github.com/scipy/scipy/pull/12020>`__: MAINT: Removed handling of circular input in SphericalVoronoi * `#12022 <https://github.com/scipy/scipy/pull/12022>`__: DOC : added default value of absolute_sigma to False in scipy.optimize.curve_fit docs * `#12024 <https://github.com/scipy/scipy/pull/12024>`__: DOC: add Examples for io.hb_read() and io.hb_write() * `#12025 <https://github.com/scipy/scipy/pull/12025>`__: MAINT: Remove numpy/npy_3kcompat.h from nd_image * `#12028 <https://github.com/scipy/scipy/pull/12028>`__: Spelling correction * `#12030 <https://github.com/scipy/scipy/pull/12030>`__: ENH: optimize/_trlib: support ILP64 blas/lapack * `#12036 <https://github.com/scipy/scipy/pull/12036>`__: MAINT: Add some generated C files .gitignore * `#12038 <https://github.com/scipy/scipy/pull/12038>`__: MAINT, CI: Travis rackcdn->conda.org * `#12039 <https://github.com/scipy/scipy/pull/12039>`__: MAINT: signal: Lower the resolution of the plots in the chirp... * `#12040 <https://github.com/scipy/scipy/pull/12040>`__: DOC: add Examples for ndimage.spline_filter1d() and spline_filter()... * `#12044 <https://github.com/scipy/scipy/pull/12044>`__: MAINT: combine apt-get update and apt-get install into one RUN * `#12045 <https://github.com/scipy/scipy/pull/12045>`__: TST: Reduce size of test_diagonal_types to speed up tests * `#12046 <https://github.com/scipy/scipy/pull/12046>`__: MAINT: Remove unused npy_3kcompat.h * `#12047 <https://github.com/scipy/scipy/pull/12047>`__: MAINT: Cython 3.0 compat * `#12050 <https://github.com/scipy/scipy/pull/12050>`__: DOC: add download number badges of PyPI and conda-forge in README.rst * `#12052 <https://github.com/scipy/scipy/pull/12052>`__: DOC: add Examples odr.models.polynomial() and fix odr.odr docstring... * `#12056 <https://github.com/scipy/scipy/pull/12056>`__: ENH: Modifies shapiro to return a named tuple * `#12057 <https://github.com/scipy/scipy/pull/12057>`__: Adding my name into THANKS.txt * `#12060 <https://github.com/scipy/scipy/pull/12060>`__: TST: Reduce number of test_diagonal_types configs * `#12062 <https://github.com/scipy/scipy/pull/12062>`__: TST: Change dec.slow to pytest.mark.slow * `#12068 <https://github.com/scipy/scipy/pull/12068>`__: ENH: Modifies jarque_bera to return a named tuple * `#12070 <https://github.com/scipy/scipy/pull/12070>`__: MAINT, CI: appveyor rack->conda.org * `#12072 <https://github.com/scipy/scipy/pull/12072>`__: TST: filter out factorial(float) deprecation warning * `#12078 <https://github.com/scipy/scipy/pull/12078>`__: TST: Skip test on colab with large memory alloc * `#12079 <https://github.com/scipy/scipy/pull/12079>`__: DOC: Remove Python2 reference from stats tutorial * `#12081 <https://github.com/scipy/scipy/pull/12081>`__: DOC: add Examples docstring for optimize.show_options() * `#12084 <https://github.com/scipy/scipy/pull/12084>`__: BUG: interpolate: fix BarycentricInterpolator with integer input... * `#12089 <https://github.com/scipy/scipy/pull/12089>`__: ENH: spatial/qhull: support ILP64 Lapack * `#12090 <https://github.com/scipy/scipy/pull/12090>`__: ENH: integrate: support ILP64 BLAS in odeint/vode/lsoda * `#12091 <https://github.com/scipy/scipy/pull/12091>`__: ENH: integrate: support ILP64 in quadpack * `#12092 <https://github.com/scipy/scipy/pull/12092>`__: BUG: Fix dropping dt in signal.StateSpace * `#12093 <https://github.com/scipy/scipy/pull/12093>`__: MAINT: Rollback python2.6 workaround * `#12094 <https://github.com/scipy/scipy/pull/12094>`__: MAINT: \`openblas_support\` hash checks * `#12095 <https://github.com/scipy/scipy/pull/12095>`__: MAINT: ndimage: change \`shares_memory\` to \`may_share_memory\` * `#12098 <https://github.com/scipy/scipy/pull/12098>`__: Doc: change 4 model instances of odr to be instances of \`Model\`... * `#12101 <https://github.com/scipy/scipy/pull/12101>`__: Removed more unused imports and assignments. * `#12107 <https://github.com/scipy/scipy/pull/12107>`__: ENH: Area calculation for 2D inputs in SphericalVoronoi * `#12108 <https://github.com/scipy/scipy/pull/12108>`__: MAINT: ensure attributes have correct data type in \`SphericalVoronoi\` * `#12109 <https://github.com/scipy/scipy/pull/12109>`__: degree is not order in splines * `#12110 <https://github.com/scipy/scipy/pull/12110>`__: ENH: More helpful/forgiving io.wavfile errors * `#12117 <https://github.com/scipy/scipy/pull/12117>`__: BUG: fix newline * `#12123 <https://github.com/scipy/scipy/pull/12123>`__: [MAINT] Fix error on PyData/Sparse import. * `#12124 <https://github.com/scipy/scipy/pull/12124>`__: TST: Always test matmul now that Python3.5+ is required * `#12126 <https://github.com/scipy/scipy/pull/12126>`__: TST: Cleanup unused matplotlib code. * `#12127 <https://github.com/scipy/scipy/pull/12127>`__: DOC: update docstrings of signal.cspline2d, qspline2d, sepfir2d * `#12130 <https://github.com/scipy/scipy/pull/12130>`__: MAINT: Fixing broken links with linkchecker * `#12135 <https://github.com/scipy/scipy/pull/12135>`__: ENH: linalg: Add the function convolution_matrix. * `#12136 <https://github.com/scipy/scipy/pull/12136>`__: MAINT: Cleanup np.poly1d hack * `#12137 <https://github.com/scipy/scipy/pull/12137>`__: TST, CI: reproduce wheels 32-bit setup * `#12140 <https://github.com/scipy/scipy/pull/12140>`__: TST: stats: add kstwo, ksone to slow tests. * `#12141 <https://github.com/scipy/scipy/pull/12141>`__: Support 64-bit integer size in Fitpack * `#12151 <https://github.com/scipy/scipy/pull/12151>`__: DOC: Correct Rosenbrock function sum * `#12159 <https://github.com/scipy/scipy/pull/12159>`__: BUG: Fix length calculation in upfirdn * `#12160 <https://github.com/scipy/scipy/pull/12160>`__: BUG: Fix M_PI * `#12168 <https://github.com/scipy/scipy/pull/12168>`__: DOC: add an obsolete version checking javascript to doc release... * `#12171 <https://github.com/scipy/scipy/pull/12171>`__: CI, MAINT: Azure OpenBLAS drive flip * `#12172 <https://github.com/scipy/scipy/pull/12172>`__: ENH: Bounds for the Powell minimization method * `#12175 <https://github.com/scipy/scipy/pull/12175>`__: BLD: support more Fortran compilers for ilp64 and macro expansion... * `#12179 <https://github.com/scipy/scipy/pull/12179>`__: BUG: stats: A few distributions didn't accept lists as arguments. * `#12180 <https://github.com/scipy/scipy/pull/12180>`__: MAINT: removed redundant import in SphericalVoronoi tests * `#12181 <https://github.com/scipy/scipy/pull/12181>`__: DOC: for versionwarning don't use $.getScript * `#12182 <https://github.com/scipy/scipy/pull/12182>`__: MAINT: random sampling on the hypersphere in SphericalVoronoi... * `#12194 <https://github.com/scipy/scipy/pull/12194>`__: MAINT: Module and example cleanups for doc build * `#12202 <https://github.com/scipy/scipy/pull/12202>`__: ENH: tool to DL release wheels from Anaconda * `#12210 <https://github.com/scipy/scipy/pull/12210>`__: Remove py.typed marker (at least for the release) * `#12217 <https://github.com/scipy/scipy/pull/12217>`__: BUG: stats: Fix handling of edge cases in median_abs_deviation. * `#12223 <https://github.com/scipy/scipy/pull/12223>`__: BUG: stats: wilcoxon returned p > 1 for certain inputs. * `#12227 <https://github.com/scipy/scipy/pull/12227>`__: BLD: Set macos min version when building rectangular_lsap * `#12229 <https://github.com/scipy/scipy/pull/12229>`__: MAINT: tools/gh_lists.py: fix http header case sensitivity issue * `#12236 <https://github.com/scipy/scipy/pull/12236>`__: DOC: Fix a couple grammatical mistakes in 1.5.0-notes.rst. Checksums ========= MD5 ~~~ 06ae131459a8f9f3c937fd93df34941d scipy-1.5.0rc1-cp36-cp36m-macosx_10_9_x86_64.whl dccbe43624b6653f6456573507575cee scipy-1.5.0rc1-cp36-cp36m-manylinux1_i686.whl d8f025f467888674450ed38515083494 scipy-1.5.0rc1-cp36-cp36m-manylinux1_x86_64.whl 64c3f1654e715bc08fc7e092b8262c30 scipy-1.5.0rc1-cp36-cp36m-win32.whl 3a8ec7956496ed7ee72beaf00421b1d0 scipy-1.5.0rc1-cp36-cp36m-win_amd64.whl 7e6860a337c06d79a19fbef7174acd41 scipy-1.5.0rc1-cp37-cp37m-macosx_10_9_x86_64.whl d825cf7fe16d80ad3584492589dc3460 scipy-1.5.0rc1-cp37-cp37m-manylinux1_i686.whl 919412506218a00076538d8af5d7298d scipy-1.5.0rc1-cp37-cp37m-manylinux1_x86_64.whl 2979169481de902e252dc451154c477a scipy-1.5.0rc1-cp37-cp37m-win32.whl 5f48084c65734a4aeae510f21bcf792a scipy-1.5.0rc1-cp37-cp37m-win_amd64.whl 892607da25980af624c4a0cd82ff557f scipy-1.5.0rc1-cp38-cp38-macosx_10_9_x86_64.whl fb0bcb4d0646e28e093154a98d3bf3eb scipy-1.5.0rc1-cp38-cp38-manylinux1_i686.whl 827b361a0db6671b42ed5aad4a8a906c scipy-1.5.0rc1-cp38-cp38-manylinux1_x86_64.whl f71920b927c3d2eaed4df6c65407a56a scipy-1.5.0rc1-cp38-cp38-win32.whl eacc04102822177622c4e0d5061d580d scipy-1.5.0rc1-cp38-cp38-win_amd64.whl 4dccc1db984fc0fb92697e464774e4da scipy-1.5.0rc1.tar.gz fad54bb2d322f02d4050e521cb856a27 scipy-1.5.0rc1.tar.xz 62867d716dfcb8ae9bd907da479c6926 scipy-1.5.0rc1.zip SHA256 ~~~~~~ ce0164965caadd3a53583ad63643679ccea70b6bb25a691e4a74d3e87e3fffea scipy-1.5.0rc1-cp36-cp36m-macosx_10_9_x86_64.whl 6591dc05981308fb620c3705bf684b57241b73fe9369748f36eaf7069969c67e scipy-1.5.0rc1-cp36-cp36m-manylinux1_i686.whl b5d756e25e26184d19172db49b185a05c618d7c1323588fa261563b451b0dc7b scipy-1.5.0rc1-cp36-cp36m-manylinux1_x86_64.whl a705d1c6b8b9b7a3f5f57aec792be3fce2d65cdf49a8559852084aa18c57af1e scipy-1.5.0rc1-cp36-cp36m-win32.whl d395b63f6bfb737f3b45c8253af7e1761af1cc015db7347cbaacf1f643f3f7b8 scipy-1.5.0rc1-cp36-cp36m-win_amd64.whl 1f57d75c49f6c8b17b4d9217011e5ecca4d04941eb79a465bdfdf9591f09a312 scipy-1.5.0rc1-cp37-cp37m-macosx_10_9_x86_64.whl 38cf18ab60d853113137229e328c97719c22b02d3bf8873349472103015de5f7 scipy-1.5.0rc1-cp37-cp37m-manylinux1_i686.whl 1f402f14e726d41fd34e30b6c54daac36ac84ee64c4a430ed4b5ec016705e053 scipy-1.5.0rc1-cp37-cp37m-manylinux1_x86_64.whl 52998372c9179ebfbf7e875e4cb29137d4edc2b9d6614c5e57a180501dacf4f0 scipy-1.5.0rc1-cp37-cp37m-win32.whl fb642c6c4a19feeeee84a74d1e38c16952fde36c752e4c4a8ed70f9e4d70d5c7 scipy-1.5.0rc1-cp37-cp37m-win_amd64.whl eabc685cae91a899f6eff8aed3db3df2ad884df3b46f85314b5ca016d5bb93ea scipy-1.5.0rc1-cp38-cp38-macosx_10_9_x86_64.whl 52b693c1f842e126efb7882038680fed920fc2014cad3a16da4673e41dc8d0a9 scipy-1.5.0rc1-cp38-cp38-manylinux1_i686.whl 25db07c206d81c9dd9b9a0ea4ea4a134026e4cddc83968e99bc2b95ce2b3c760 scipy-1.5.0rc1-cp38-cp38-manylinux1_x86_64.whl 2a0d8504a08507d6e7b5c2b65db11fdb10ca63245166a5496fe3a781d0d9a452 scipy-1.5.0rc1-cp38-cp38-win32.whl 142649a4487e8849aa7e3ea11e010f6201683ed56adc02270d2c7a8cdb93a7e8 scipy-1.5.0rc1-cp38-cp38-win_amd64.whl e90d679b96b9cbd249e900b2d03558bb01ae161aa9400e9b6cd435cce82552ea scipy-1.5.0rc1.tar.gz e662fba1716763204a38293bf7a157af42c72dec3fc0ea55ff83dc8f49fbf0b5 scipy-1.5.0rc1.tar.xz 90f6fb35601d3ce52cdc9d53888a92504efec9a267a524bc33ad66a407ce070d scipy-1.5.0rc1.zip -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAEBCAAGBQJe0sVbAAoJELD/41ZX0J71n/4P/3012tbgm9o+SaGUiaQy6PGj TqzuX9vRbJipUUODVXQjDJz85oEKOlTLYFeTB1gS27p1s1DpsGs5rDhPv2t0DFUL MKDFYGt3xwQf+3JTJXBAuEyIl62H/YrwIUvVJic9lzJ+b/lPm+5G4ax+Iso1H/x+ 2hN/KiFsKS/ckQ3P2GYvTmW2WGVhacYd1qJM0NNBJa+12nJmLeFlHrWzC6D3hrT/ w1dlVGW7dbEBpRQ6IrH/TFY+8I+my3DyJlnhCDsKOoSRFvZSAXX5Ajsj9jB3s1l1 vRy/fjM7uTk6WBwLkfi64o01Z0RKL3wB0+mpjXEZd39IayjPT5vzS2iHm1gnpXzv uxW+Btfem6XJlVEXeG9R7BWe7SDJq1f009QIlUfCB35k/G5y1Cd+F+I4l4hB/Vw+ 2zoUgfJT9m/r0VZ2bvoIzLx8Q3fDtFceqMbxSy1HCQ/7BYJ/w/PM8eChKsBj7SgJ BXh8EzVpSMeWTVuGWtztl9sZKGKJKkEVxuOVVze4V9PNkW4sQDNcz5YmPsfpQHvc dIrivDKMAlxbOT8nUEZ8bAd6AaN5i9E8+450XmfN307Q1sRj1X5JdhtZTqITs1w1 /RBgwvM8XaQLn0wd8QtwVaEkyd5gu/ui0yPzwJ2WEb5zz5VbbHacm6pDR8avTXQW zdR9OHUlD+Zgvah64iAW =INrS -----END PGP SIGNATURE-----

1 0

Is it OK to extend the ndarray structure?
by Sebastian Berg May 27, 2020

May 27, 2020

Hi all, just curious, has anyone reservations about extending the ndarray struct (and the void scalar one)? The reason is that, I am starting to dislike the way we handle the buffer interface. Due to issues with backward compatibility, we cannot use the "right" way to free the buffer information. Because of that, the way we solve it is by storing lists of pointers in a dictionary... To me this seems a bit complicating, and is annoying since it adds a dictionary lookup overhead to every single array deletion (and inserting for every buffer creation). Also, it looks a bit like a memory leak in some cases (although that probably only annoys me and only when running valgrind). It seems that it would be much simpler to tag the buffer-info on to the array object itself. Which, however, would require extending the array object by a single pointer [1]. Extending is in theory an ABI break if anyone subclasses ndarray from C (extending the struct) and does not very carefully anticipate the possibility. I am not even sure we support that, but its hard to be sure... Cheers, Sebastian [1] The size difference should not matter IMO, and with cythons memoryviews buffers are not an uncommon feature in any case, for the void scalar it is a bit bigger, but they are also very rare. (I thought of using weak references, but the CPython API seems not very fleshed out, or at least not documented, so not sure about that).

2 2

new numpy.org is live
by Inessa Pawson May 26, 2020

May 26, 2020

The NumPy web team is excited to announce the launch of the newly redesigned numpy.org. To transform the website into a comprehensive, yet user-centric, resource of all things NumPy was a primary focus of this months-long effort. We thank Joe LaChance, Ralf Gommers, Shaloo Shalini, Shekhar Prasad Rajak, Ross Barnowski, and Mars Lee for their extensive contributions to the project. The new site features a curated collection of NumPy related educational resources for every user level, an overview of the entire Python scientific computing ecosystem, and several case studies highlighting the importance of the library to the many advances in scientific research as well as the industry in recent years. The “Install” and “Get Help” pages offer advice on how to find answers to installation and usage questions, while those who are looking to connect with others within our large and diverse community will find the “Community” page very helpful. The new website will be updated on a regular basis with news about the NumPy project development milestones, community initiatives and events. Visitors are encouraged to explore the website and sign up for the newsletter. Next, the NumPy web team will focus on updating graphics and project identity (a new logo is coming!), adding an installation widget and translations, better integrating the project documentation via the new Sphinx theme, and improving the interactive terminal experience. Also, we are looking to expand our portfolio of case studies and would appreciate any assistance in this matter. Best regards, Inessa Pawson NumPy web team

10 10