Texas’ Right To Repair Bill Is A Signature Away From Becoming Law

June 9, 2025 by Maya Posch 20 Comments

In what could be a big step forward for consumer rights, the Texas Senate recently unanimously voted to pass HB 2963, which references the “Diagnosis, maintenance, and repair of certain digital electronic equipment”. If signed by the governor, this would make Texas the ninth US state to enact such a law, and the seventh pertaining to consumer electronics. Interestingly, this bill saw anti-parts pairing language added, which is something that got stripped from the Oregon bill.

Much like other Right to Repair bills, HB 2963 would require manufacturers to make spare parts, documentation and repair tools available to both consumers and independent repair shops. If signed, the act would take effect in September of 2026. Included in the bill are provisions to prevent overcharging for the provided parts and documentation.

As for how useful this is going to be for consumers, [Louis Rossmann] had a read of the bill and gave his typically eloquent thoughts. The tl;dw is that while there is a lot of stuff to like, this bill leaves open potentially massive loopholes (e.g. assemblies vs parts), while also carving out massive exemptions, which leaves owners of game consoles, boats, cars, tractors, home appliances, etc. stranded with no new options.

Continue reading “Texas’ Right To Repair Bill Is A Signature Away From Becoming Law” →

Smart Thermostats Pitched For Texas Homes To Relieve Stressed Grid

November 14, 2024 by Maya Posch 86 Comments

It’s not much of a secret that Texas’ nearly completely isolated grid is in a bit of a pickle, with generating capacity often being handily outstripped during periods of extreme demand. In a latest bid to fight this problem, smart thermostats are being offered to customers, who will then participate in peak-shaving. The partnership between NRG Energy Inc., Renew Home LLC, and Alphabet Inc. will see about 650,000 of these thermostats distributed to customers.

For customers the incentive would be mostly financial, though the details on the potential cost savings seem scarce. The thermostats would be either a Vivint (an NRG company) or Google Nest branded one, which would be controlled via Google Cloud, allowing for thermostat settings to be changed to reduce the load on the grid. This is expected to save ‘300 MW’ in the first two years, though it’s not clear whether this means ‘continuously’, or intermittent like with a peaker natural gas plant.

Demand curtailment is not a new thing, with it being a big thing among commercial customers in South Korea, as we discussed within the topic of vehicle-to-grid energy storage. Depending on how it is implemented it can make a big difference, but it’ll remain to see how regular consumers take to the idea. It also provides more evidence for reducing grid load being a lot easier than adding grid-level storage, which is becoming an increasingly dire topic as more non-dispatchable solar and wind power is added to the grid.

Hackaday Links: July 21, 2024

July 21, 2024 by Dan Maloney 20 Comments

When monitors around the world display a “Blue Screen of Death” and you know it’s probably your fault, it’s got to be a terrible, horrible, no good, very bad day at work. That’s likely the situation inside CrowdStrike this weekend, as engineers at the cybersecurity provider struggle to recover from an update rollout that went very, very badly indeed. The rollout, which affected enterprise-level Windows 10 and 11 hosts running their flagship Falcon Sensor product, resulted in machines going into a boot loop or just dropping into restore mode, leaving hapless millions to stare at the dreaded BSOD screen on everything from POS terminals to transit ticketing systems.

Continue reading “Hackaday Links: July 21, 2024” →

Hackaday Links: March 28, 2021

March 28, 2021 by Dan Maloney 17 Comments

If you thought the global shortage of computer chips couldn’t get any worse, apparently you weren’t counting on 2021 looking back at 2020 and saying, “Hold my beer.” As if an impacted world waterway and fab fires weren’t enough to squeeze supply chains, now we learn that water restrictions could potentially impact chip production in Taiwan. The subtropical island usually counts on three or four typhoons a year to replenish its reservoirs, but 2020 saw no major typhoons in the region. This has plunged Taiwan into its worst drought since the mid-1960s, with water-use restrictions being enacted. These include a 15% reduction of supply to industrial users as well as shutting off the water entirely to non-industrial users for up to two days a week. So far, the restrictions haven’t directly impacted chip and display manufacturers, mostly because their fabs are located outside the drought zone. But for an industry where a single fab can use millions of gallons of water a day, it’s clearly time to start considering what happens if the drought worsens.

Speaking of the confluence of climate and technology, everyone problem remembers the disastrous Texas cold snap from last month, especially those who had to endure the wrath of the unusually brutal conditions in person. One such victim of the storm is Grady, everyone’s favorite YouTube civil engineer, who recently released a very good post-mortem on the engineering causes for the massive blackouts experienced after the cold snap. In the immediate aftermath of the event, we found it difficult to get anything approaching in-depth coverage on its engineering aspects — our coverage excepted, naturally — as so much of what we found was laden with political baggage. Grady does a commendable job of sticking to the facts as he goes over the engineering roots of the disaster and unpacks all the complexity of the infrastructure failures we witnessed. We really enjoyed his insights, and we wish him and all our friends in Texas the best of luck as they recover.

If you’re into the demoscene, chances are pretty good that you already know about the upcoming Revision 2021, the year’s big demoscene party. Like last year’s Revision, this will be a virtual gathering, but it seems like we’re all getting pretty used to that by now. The event is next weekend, so if you’ve got a cool demo, head over and register. Virtual or not, the bar was set pretty high last year, so there should be some interesting demos that come out of this year’s party.

Many of us suffer from the “good enough, move on” mode of project management, leaving our benches littered with breadboarded circuits that got far enough along to ~~bore the hell out of us~~ make a minimally useful contribution to the overall build. That’s why we love it when we get the chance to follow up on a build that has broken from that mode and progressed past the point where it originally caught our attention. A great example is Frank Olsen’s all-wood ribbon microphone. Of course, with magnets and an aluminum foil ribbon element needed, it wasn’t 100% wood, but it still was an interesting build when we first spied it, if a bit incomplete looking. Frank has fixed that in grand style by continuing the wood-construction theme that completes this all-wood replica of the iconic RCA Model 44 microphone. It looks fabulous and sounds fantastic; we can’t help but wonder how many times Frank glued his fingers together with all that CA adhesive, though.

Continue reading “Hackaday Links: March 28, 2021” →

Wind Turbines And Ice: How They’re Tailored For Specific Climates

March 1, 2021 by Bryan Cockfield 75 Comments

Wind turbines are incredible pieces of technology, able to harvest wind energy and deliver it to the power grid without carbon emissions. Their constant development since the first one came online in 1939 mean that the number of megawatts produced per turbine continues to rise as price per megawatt-hour of wind energy continues to fall. Additionally, they can operate in almost any climate to reliably generate energy almost anywhere in the world from Canada to the North Atlantic to parts beyond. While the cold snap that plowed through the American South recently might seem to contradict this fact, in reality the loss of wind power during this weather event is partially a result of tradeoffs made during the design of these specific wind farms (and, of course, the specifics of how Texas operates its power grid, but that’s outside the scope of this article) rather than a failure of the technology itself.