I use Steam Input to set up mouse input on my controller to utilize gyro aiming, which lets me play against mouse players without utilizing aim assist.

And I also set up keyboard inputs on my controller to be able to utilize keyboard short cuts over relying on things like the weapon/item wheel.

Makes it so I get a controller experience that is more mouse and keyboard like that I couldn’t get relying on default controller schemes.

I don’t think their hardware sales becoming insanely profitable is their main goal and their focus on the finance side might be to at the very worst break even.

Their main goal I believe is to try to increase Linux usage so the holdouts against it might start allowing their games to run on Linux, and devs may feel that with Stean machines out there that can run their more resource heavy games better than the Deck it is worth it to pursue proton compatibility.

They probably learned from the mistakes they made in the past when they pushed Linux adoption attempts on to third party companies. They realized they needed to provide some standardized hardware instead of leaving the work to others if they wanted Linux to start being taken more seriously among devs with how small the userbase still is even with the Deck success.

My hope after seeing that the joysticks themselves look like they can be removed from the main board is that the touchpads can be relocated to the top without too much hassle and put into a 3D printed top shell made by the community. So if that were possible what I’d probably do is pop off the XYAB, dpad, and board holding the joystick so the touchpad can be moved up to make the touchpads comfortable for primary use.

And then I’d rely on the back buttons and set up a dpad modeshift on a right pad click to enable edge and center clicks, so I wouldn’t miss the absence of the other inputs too much. I also use touchpad for movement where I’ll often set outer ring to sprint and map crouch/slide/dash on touchpad click, so cuts down on needed inputs further.

So that’s my hope that modifying the new Steam Controller for touchpad users will be as simple as 3d printing a shell and opening the controller and not require further things like soldering.

I played through Doom Eternal like that on my Steam Controller where I mapped mouse to the touchpad for quick turns, gyro activated on touch, and mapped some of the weapons on the touchpad so I could swap to them when I clicked by setting up a dpad modeshift on right pad click with an inverted outer ring for center click.

Turned off aim assist and went my way.

Yeah, chords are very powerful for fixing a lot of issues. Especially for mixed input since some weird things can occur. My favorite fix is for Red Dead Redemption 2 where left stick click when mouse input is detected caused the game to enter Dead Eye. So I solved it by setting up a chord so that when I am touching the right touchpad ‘L3’ becomes ‘Ctrl’, which let me enter crouch without dead eye being activated.

https://lemmy.world/post/3533396

Can’t wrap my mind around the difference between modeshifting and action layers, though. The former seems much easier to use, but somehow doesn’t work that consistently for me, so yeah, I end up doing what you’re showing.

Action Layer

So action layers is like a copy of your default controller config that you can switch to and have the changes you want made to it. Example of how I use this in the Finals is when I play light I have it set up so left touchpad click is dash/grapple compared to the default config I use for medium and heavy where left touchpad click is crouch as opposed a specialization. I switch between my light and medium/heavy controller set by holding down the select button. Action Layer is similar and I’ll use it for temporarily switching between configs. Example is if I hold down the left bumper going to an action layer where my right trackpad is outputting a right joystick to make selecting from the conversation wheel easier and when let go reverts back to the default where right trackpad is a mouse.

Modeshift

Modeshifts are similar but more reliable when it comes to in game actions. So use cases of modeshifts might be having the trackpad when clicked modeshift into a dpad, and it’ll revert back to a regular trackpad afterwards. Or when the left trigger is fully pulled it modeshifts into a different gyro sensitivity that is lower than what the gyro is normally, which comes in useful if a game doesn’t offer aim sensitivity adjustments for ADS.

Chords

Chords are similar to modeshifts and I use them to add on additional functions on top of the modeshift. Like if I have the trackpad modeshift into a dpad on a click with the inputs 1,2,3,4 mapped to it. Then I might set up a chord, so that when the left grip is held and the trackpad is clicked the inputs are 5,6,7,8. Or in some games like the Finals sprinting can take you out of ADS and I bind the sprint button on the outer edge. So I’ll set a chord so that when I am holding down the left trigger to aim the outer edge become an empty bind so I don’t take myself out of aiming by accident. If you find yourself accidentally triggering things on the dpad modeshift you can set up a chord that returns an empty bind to help. Like in the Finals I found myself sometimes accidentally reloading (left click) or meleeing (center click) on the touchpad when I was firing a gun and interrupting it during tense moments, so I set up a chord so that when I am holding down the right trigger the left click which normally outputs reload and center click which is melee turns into an empty bind that outputs nothing.

Were you yourself ever able to adjust to this kind of scheme on Steam Deck?

As for the Steam Deck and fps. I find myself playing more hack and slash and platformers on the Deck, since I haven’t found the touchpads ergonomic for my hands. I’ve found the touchpad experience feels like a downgrade compared to the Steam Controller touchpads, since the location is better on the Steam Controller. I also found the concave circular shape of the steam controller touchpads to be more consistent when it comes to swiping the camera to turn 180 as shown in this demo. With Deck I found I was only able to replicate it adjusting the rotation until it went from corner to corner, but did not find it comfortable. So I stick to joysticks on the Steam Deck.

Some games doing a poor job at mixed input doesn’t help either: things like prompts rapidly switching between that of MKB and controller, or the game not allowing you to switch on the fly, etc.

Yeah that has been an annoyance for a long time. And even worse when there is no mixed input support. When that happens if the game allows sprint and walk to be set to a hold as opposed to a toggle I will use soft presses to set up a pseudo analog experience.

I uploaded the config for the Steam Controller with the name “Dualpad with Gyro Updated…”

Problem is that if you try to use the config on the Steam Deck I don’t think it’ll work the same way, since on the Steam Deck trackpad click is set up through soft press as opposed to the physical click that the Steam Controller uses.

I did play around with trying to set up something similar in the past on the Deck touchpads and did it through action layers instead of mode shift. Set it up so that clicking the touchpad switched to the action layer where the touchpad was set up as a dpad that I had stuff mapped too, and release press removed the same action layer to return back to the default action set.

https://imgur.com/a/steam-deck-dpad-modeshift-workaround-using-action-layers-b1wyHEK

But, when I did this workaround modeshifts weren’t available in the current UI yet, so maybe a normal dpad modeshift setup would work on the Deck pads now. This was how I set it up in the old Steam Input UI https://youtu.be/4vN1Jj7EPZk. If not then action layer approach is the other method.

Update: so I decided to try it on the Steam Deck and I was able to set up a dpad modeshift on a pad click and even get the chord function to work so the inputs change if I hold one of the left back buttons. Only issue is I couldn’t find a way to adjust the pressure required to register a click for the touchpad when it came to the modeshift pad click.

Unless you need the touchpad and resistance triggers I’ve come to prefer the Ultimate 2 wireless over the dualsense.

Has TMR sticks, extra bumper buttons, back buttons, and charging dock. Got firmware update to allow the extra buttons to be remappable through Steam Input too.

Don’t see myself considering a PlayStation controller on the PC unless future versions start coming with hall effect or TMR sticks, and even then with them charging double the price for paddle buttons it is a hard sell over third party controller options on the PC.

Right now has to be the 8bitdo Ultimate 2 wireless. Not the bluetooth switch one. Need to update the dongle and controller to the latest beta firmware and launch it in dinput mode by turning it on while holding the B button. Then all the extra buttons can be mapped along with using gyro with analog triggers, which couldn’t be done before.

There is a bug that needs to be fixed where rumble can cause the controller to stop working in game, so for now need to use it with rumble off until that is fixed. But, everything else works when it comes to binding through Steam Input.

Prey was great in that department actually having a config that mapped mouse to the right touchpad instead of emulating a joystick like so many games did, and then had different action sets that automatically switched depending on if it was gameplay or you were in the menu. And showed proper icons like the touchpad click to reflect Steam Input mappings people set it to.

I was initially intrigued by having buttons on the bottom of the controller, where your fingers naturally would be thus freeing your thumbs to stay on the pad/sticks. And imagine my frustration to realize those rear buttons are just extensions of triggers already on top.

My set up approach to having both my thumbs stay on the pads a majority of the time has been to set up a dpad modeshift with an inverted outer ring bind so clicking up, down, left, right, center output different inputs. And depending on the game I’d set up a chord so holding the left grip and clicking the right pad would output a different set of 5 inputs. And my right grip is set to jump so with the left grip chord function for 5 additional inputs on a right pad click if needed for a total of 10 that’s been my way of doing that.

So for like Doom Eternal I swap between weapons every shot to bypass reloading through the right touchpad. I like that approach better than using stuff like weapon wheels, which in some games actually slows down the actual gameplay and interrupts the flow.

How did you use the touchpad. My approach has been to adjust the sensitivity of the touchpad until an edge to edge swipe does a 180, and for gyro having a 90 degree rotation of the controller do 675 degree rotation in game for first person and 450 degrees for third person. Made it a consistent aim experience no matter what game I played as long as the mouse input in the game was good and didn’t do things like emulate a joystick causing negative acceleration.

And for the right touchpad I set a dpad modeshift with an inverted outer ring bind so clicking up, down, left, right, center output different inputs so I didn’t have to reach down to the facebuttons as often. And depending on the game I’d set up a chord so holding the left grip and clicking would output a different set of 5 inputs.

And I just saved the template so I didn’t need to set it up all the time.

Liked it for Doom Eternal, since I could activate gyro, swipe the camera to quickly turn, and click to swap between weapons every shot to bypass reloading all on the right touchpad.

And pvp games like The Finals clicking the right pad to switch through gadgets and using the touchpad to quickly turn and activate gyro, and not feeling like my inputs were too slow versus mouse users. And not having to bother with aim assist.

My dream steam controller 2 would be the steam controller layout with the large circular concave touchpads in the top most position, better bumpers, two extra bumper buttons like the 8bitdo, 4 back buttons in total, alpakka quality gyro, and nice premium feeling material used for the shell.

But, they’ll go with the Steam Deck layout if there is one, which unfortunately has not been good for using touchpads as primary inputs for my hands. Which has me hording Steam Controllers, since it’ll likely be the only dual touchpad focused controller around. And hoping Alpakka comes out with a standalone gyro module I can stick on the Steam Controller to at least have the gyro component updated.

I’m still using the same AA eneloops I used since I picked up my Steam Controller all the way back in 2015-2016. And I also used it with my 360 controller too. Just keeps chugging along being good for a month before I need to swap.

Yeah the PS4 battery life has been crap and I don’t know why. Was finally able to replace Sony controllers with 8bitdo now that Steam provides support for the extra buttons to be mapped to unique keys and use analog triggers and gyro together. So been nice not having to spend money on the dualsense, which doesn’t even have hall effects/TMR sticks.

If you are curious here is some of my gameplay video in games like Doom Eternal, Left 4 Dead 2, The Finals, etc.

Was the first controller that allowed me to completely drop aim assist for good and not feel slow against PC players and offer keyboard like functionality for input swapping.

I just assumed they worked in a similar manner to the decks track pads.

By the way I don’t like the Steam Deck trackpads either since I found trying to use them as primary inputs in place of joysticks like on the Steam Controller was not ergonomic for my hands,and camera swipes weren’t as consistent on squares compared to concave circular pads. So on the Steam Deck despite wishing I could use the touchpads I opt for joysticks. So I don’t really see Deck touchpads as a good endorsement for using as primary inputs, since even I can’t find myself using it like the SC.

If you are curious here is some of my gameplay video in games like Doom Eternal, Left 4 Dead 2, The Finals, etc.

Was the first controller that allowed me to completely drop aim assist for good and not feel slow against PC players and offer keyboard like functionality for input swapping.

I think it’s been fine in Doom Eternal, Left 4 Dead 2, The Finals, etc.

Was the first controller that allowed me to completely drop aim assist for good and not feel slow against PC players and offer keyboard like functionality for input swapping.

Trying to find replacement batteries for integrated batteries is a pain too, since might not be able to find an OEM replacement or battery from a reputable brand. So you end up having to go with whatever random no name battery that could be worse than the OEM battery and end up dying after less than a year.

My preference is rechargeable AA or AAA. And even better if the controller itself can recharge the battery like drone controllers.

I think it’s undeniable that it’s pretty plasticky.

I don’t disagree one that part. In fact, you’d find most Steam Controller fans biggest wish is for a more premium update. That’s been a big wish for a long time with mine being a Steam Controller with better bumpers, gyro with higher polling for high refresh rate gaming, 2 more back buttons, extra bumper buttons like the 8bitdo has, dpad replacing the left joystick, pressure sensitive touchpad that are bit larger, and a much nicer material for the shell.

But, despite the less than premium build quality enthusiasts find the actual functions useful enough to keep using it. Much like the Alpakka controller that doesn’t even have a right joystick or touchpad, but gyro enthusiasts use it because it has the best gyro available right now for controllers.

So basically the stances about build quality and it not being a mainstream device is not something most Steam Controller users disagree with. That’s not really been the point of contention. There’s been agreement on that.

But back to my assertion at the top. It made SC gamers literally unfairly better. Gryo aiming, effectively programmable macros, mode shifts, radial wheels, action layers, targeted mouse clicks, button toggles, sliders, regions, I can’t even remember it all from back before it got heavily neutered. It got out of control to the point where you could bypass “cheating” standards and macros in big online games, etc. You could simulate inputs.

I don’t remember SC being singled out for that. Steam Input actually started providing third party support fast introducing it for the Sony DS4 in 2016 with all the same configurations possible, and expanding support to other controllers over the years. Now it supports 8bitdo too letting the extra buttons have unique keys mapped to it and supporting analog triggers with gyro, which until then Sony was one of the few non-discontinued controllers to have that support in Steam Input. https://www.pcgamer.com/steams-dualshock-4-support-is-now-in-beta/ Don’t remember this period of the Steam Controller being a " deadly-unfair device for competitive gaming", since if it was it would have been more popular and caught on like Cronus and Xim as opposed to from its release to discontinuation being a niche device among enthusiasts while many complained because they expected it to be like a regular dual joystick controller. This thread itself and others on other sites seems to support that with people saying they tried it and didn’t care for it, don’t get the touchpads, and some not even knowing of gyro. I even had a conversation in this thread with someone who believes people who say the Steam Controller must be good are being contrarian, since they can’t imagine how people could possibly consider it good over regular controllers.

What I remember is that aim assist got cranked up over the years to the point some mouse users started dropping it for gamepad, which led to complaints about rollers growing. And then more complaints happened about rollers as regular controller users in games like Apex used Steam Input to set up movement exploits in Apex through macros and moving while going through their inventory like mouse and keyboard users. Then rewasd with it offering recoil script. And that took a while to happen with Apex releasing in 2019, which by then SC was discontinued the same year. Rewasd was especially notorious because of not only the recoil script, but being able to map controller inputs to keyboard and mouse for people wanting to XIM on PC.

It failed because it offered too much customization. Really.

I also disagree on that too much customization was why it failed. Steam Deck has the same “too much customization.” Difference is it has dual joysticks. Many people who picked up a Steam Controller just approached it like a dual joystick controller so were disappointed, and they didn’t want a controller that needed setup. I’ve been using Steam Input many years and aside from UI changes people disagreed with, Steam Input has become much more advanced and feature rich as opposed to “neutered” as you say. Introduction of things like chords, being able to set up multiple gyro activator inputs, touchpad gestures like in Sony first party games, and mouse delta to name a few over the years.

I was happy with the Steam Controller because I didn’t pick one up expecting it to offer an experience like my Xbox controller I was using on the PC at the time. I got one because I wanted the touchpad functions the Xbox didn’t have and picked it up intending to map mouse to gyro and the touchpad. But, most people don’t want that. They want a pick up and play controller, no setup, and just be like the dual joystick controllers they used and they didn’t need Valve for a dual joystick controller either with xbox offering plug and play support with no setup with no need for Steam. And if they wanted accuracy they’d just pick up a mouse.

Even gyro is niche among all controllers, which speaks to how much people just want a Xbox experience of plugging in a controller, getting controller icons, and just playing and don’t care for aiming without aim assist. They don’t want to set up anything, and that is what having dual joysticks lets people do.