Filtering Adj-Rib-In and Adj-Rib-Out to BMP receivers
draft-pcmy-grow-bmp-adj-ribs-filtered-00
| Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Active".
Expired & archived
|
|
|---|---|---|---|
| Authors | Paolo Lucente , Camilo Cardona , Mukul Srivastava | ||
| Last updated | 2025-01-24 (Latest revision 2024-07-23) | ||
| RFC stream | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
Filtering RIBs in BMP (BGP Monitoring Protocol) can be desirable for several use-cases like, for example, limiting the amount of data a collector station has to process or allow a sender to export only a certain afi/safi of interest. This document defines a light way to inform a collector station that a Adj-Rib-In / Adj-Rib-Out data feed is being filtered.
Authors
Paolo Lucente
Camilo Cardona
Mukul Srivastava
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)