| 1 | # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998,
|
|---|
| 2 | # 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
|
|---|
| 3 | #
|
|---|
| 4 | # This file is free software; you can redistribute it and/or modify it
|
|---|
| 5 | # under the terms of the GNU General Public License as published by
|
|---|
| 6 | # the Free Software Foundation; either version 2 of the License, or
|
|---|
| 7 | # (at your option) any later version.
|
|---|
| 8 | #
|
|---|
| 9 | # This program is distributed in the hope that it will be useful, but
|
|---|
| 10 | # WITHOUT ANY WARRANTY; without even the implied warranty of
|
|---|
| 11 | # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|---|
| 12 | # General Public License for more details.
|
|---|
| 13 | #
|
|---|
| 14 | # You should have received a copy of the GNU General Public License
|
|---|
| 15 | # along with this program; if not, write to the Free Software
|
|---|
| 16 | # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|---|
| 17 |
|
|---|
| 18 | ##############################################################################
|
|---|
| 19 | ### WARNING: this file contains embedded tabs. Do not run untabify on this file.
|
|---|
| 20 |
|
|---|
| 21 | AC_INIT(move-if-change)
|
|---|
| 22 | AC_PREREQ(2.13)
|
|---|
| 23 | AC_CANONICAL_SYSTEM
|
|---|
| 24 | AC_ARG_PROGRAM
|
|---|
| 25 |
|
|---|
| 26 | sinclude(config/acx.m4)
|
|---|
| 27 |
|
|---|
| 28 | ### we might need to use some other shell than /bin/sh for running subshells
|
|---|
| 29 | ### If we are on Windows, search for the shell. This will permit people
|
|---|
| 30 | ### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure
|
|---|
| 31 | ### without also having to set CONFIG_SHELL. This code will work when
|
|---|
| 32 | ### using bash, which sets OSTYPE.
|
|---|
| 33 | case "${OSTYPE}" in
|
|---|
| 34 | *win32*)
|
|---|
| 35 | if test x${CONFIG_SHELL} = x ; then
|
|---|
| 36 | if test ! -f /bin/sh ; then
|
|---|
| 37 | if test x${SHELL} != x && test -f ${SHELL} ; then
|
|---|
| 38 | CONFIG_SHELL=${SHELL}
|
|---|
| 39 | export CONFIG_SHELL
|
|---|
| 40 | else
|
|---|
| 41 | for prog in sh sh.exe bash bash.exe; do
|
|---|
| 42 | IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
|
|---|
| 43 | for dir in $PATH; do
|
|---|
| 44 | test -z "$dir" && dir=.
|
|---|
| 45 | if test -f $dir/$prog; then
|
|---|
| 46 | CONFIG_SHELL=$dir/$prog
|
|---|
| 47 | export CONFIG_SHELL
|
|---|
| 48 | break
|
|---|
| 49 | fi
|
|---|
| 50 | done
|
|---|
| 51 | IFS="$save_ifs"
|
|---|
| 52 | test -n "${CONFIG_SHELL}" && break
|
|---|
| 53 | done
|
|---|
| 54 | fi
|
|---|
| 55 | fi
|
|---|
| 56 | fi
|
|---|
| 57 | ;;
|
|---|
| 58 | esac
|
|---|
| 59 |
|
|---|
| 60 | config_shell=${CONFIG_SHELL-/bin/sh}
|
|---|
| 61 |
|
|---|
| 62 | progname=$0
|
|---|
| 63 | # if PWD already has a value, it is probably wrong.
|
|---|
| 64 | if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi
|
|---|
| 65 |
|
|---|
| 66 | # Export original configure arguments for use by sub-configures.
|
|---|
| 67 | TOPLEVEL_CONFIGURE_ARGUMENTS="$progname $@"
|
|---|
| 68 | AC_SUBST(TOPLEVEL_CONFIGURE_ARGUMENTS)
|
|---|
| 69 |
|
|---|
| 70 | moveifchange=${srcdir}/move-if-change
|
|---|
| 71 |
|
|---|
| 72 | # Set srcdir to "." if that's what it is.
|
|---|
| 73 | # This is important for multilib support.
|
|---|
| 74 | pwd=`${PWDCMD-pwd}`
|
|---|
| 75 | srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
|
|---|
| 76 | if test "${pwd}" = "${srcpwd}" ; then
|
|---|
| 77 | srcdir=.
|
|---|
| 78 | fi
|
|---|
| 79 |
|
|---|
| 80 | topsrcdir=$srcpwd
|
|---|
| 81 |
|
|---|
| 82 | extra_host_args=
|
|---|
| 83 | # Define the trigger file to make sure configure will re-run whenever
|
|---|
| 84 | # the gcc version number changes.
|
|---|
| 85 | if test "${with_gcc_version_trigger+set}" = set ; then
|
|---|
| 86 | gcc_version_trigger="$with_gcc_version_trigger"
|
|---|
| 87 | gcc_version=`grep version_string ${with_gcc_version_trigger} | sed -e 's/.*\"\([[^ \"]]*\)[[ \"]].*/\1/'`
|
|---|
| 88 | else
|
|---|
| 89 | # If gcc's sources are available, define the trigger file.
|
|---|
| 90 | if test -f ${topsrcdir}/gcc/version.c ; then
|
|---|
| 91 | gcc_version_trigger=${topsrcdir}/gcc/version.c
|
|---|
| 92 | gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([[^ \"]]*\)[[ \"]].*/\1/'`
|
|---|
| 93 | case "$ac_configure_args" in
|
|---|
| 94 | *--with-gcc-version-trigger=$gcc_version_trigger* )
|
|---|
| 95 | ;;
|
|---|
| 96 | * )
|
|---|
| 97 | # Add to all subconfigure arguments: build, host, and target.
|
|---|
| 98 | ac_configure_args="$ac_configure_args --with-gcc-version-trigger=$gcc_version_trigger"
|
|---|
| 99 | ;;
|
|---|
| 100 | esac
|
|---|
| 101 | fi
|
|---|
| 102 | fi
|
|---|
| 103 |
|
|---|
| 104 | ### To add a new directory to the tree, first choose whether it is a target
|
|---|
| 105 | ### or a host dependent tool. Then put it into the appropriate list
|
|---|
| 106 | ### (library or tools, host or target), doing a dependency sort.
|
|---|
| 107 |
|
|---|
| 108 | # Subdirs will be configured in the order listed in build_configdirs,
|
|---|
| 109 | # configdirs, or target_configdirs; see the serialization section below.
|
|---|
| 110 |
|
|---|
| 111 | # Dependency sorting is only needed when *configuration* must be done in
|
|---|
| 112 | # a particular order. In all cases a dependency should be specified in
|
|---|
| 113 | # the Makefile, whether or not it's implicitly specified here.
|
|---|
| 114 |
|
|---|
| 115 | # Double entries in build_configdirs, configdirs, or target_configdirs may
|
|---|
| 116 | # cause circular dependencies and break everything horribly.
|
|---|
| 117 |
|
|---|
| 118 | # these libraries are used by various programs built for the host environment
|
|---|
| 119 | #
|
|---|
| 120 | host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl tix libgui zlib"
|
|---|
| 121 |
|
|---|
| 122 | # these tools are built for the host environment
|
|---|
| 123 | # Note, the powerpc-eabi build depends on sim occurring before gdb in order to
|
|---|
| 124 | # know that we are building the simulator.
|
|---|
| 125 | # binutils, gas and ld appear in that order because it makes sense to run
|
|---|
| 126 | # "make check" in that particular order.
|
|---|
| 127 | host_tools="byacc flex bison binutils gas ld gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar"
|
|---|
| 128 |
|
|---|
| 129 | # libgcj represents the runtime libraries only used by gcj.
|
|---|
| 130 | libgcj="target-libffi \
|
|---|
| 131 | target-boehm-gc \
|
|---|
| 132 | target-zlib \
|
|---|
| 133 | target-qthreads \
|
|---|
| 134 | target-libjava"
|
|---|
| 135 |
|
|---|
| 136 | # these libraries are built for the target environment, and are built after
|
|---|
| 137 | # the host libraries and the host tools (which may be a cross compiler)
|
|---|
| 138 | #
|
|---|
| 139 | target_libs="target-libiberty \
|
|---|
| 140 | target-libgloss \
|
|---|
| 141 | target-newlib \
|
|---|
| 142 | target-libstdc++-v3 \
|
|---|
| 143 | target-libf2c \
|
|---|
| 144 | ${libgcj} \
|
|---|
| 145 | target-libobjc"
|
|---|
| 146 |
|
|---|
| 147 | # these tools are built using the target libs, and are intended to run only
|
|---|
| 148 | # in the target environment
|
|---|
| 149 | #
|
|---|
| 150 | # note: any program that *uses* libraries that are in the "target_libs"
|
|---|
| 151 | # list belongs in this list. those programs are also very likely
|
|---|
| 152 | # candidates for the "native_only" list which follows
|
|---|
| 153 | #
|
|---|
| 154 | target_tools="target-examples target-groff target-gperf target-rda"
|
|---|
| 155 |
|
|---|
| 156 | ################################################################################
|
|---|
| 157 |
|
|---|
| 158 | ## All tools belong in one of the four categories, and are assigned above
|
|---|
| 159 | ## We assign ${configdirs} this way to remove all embedded newlines. This
|
|---|
| 160 | ## is important because configure will choke if they ever get through.
|
|---|
| 161 | ## ${configdirs} is directories we build using the host tools.
|
|---|
| 162 | ## ${target_configdirs} is directories we build using the target tools.
|
|---|
| 163 | #
|
|---|
| 164 | configdirs=`echo ${host_libs} ${host_tools}`
|
|---|
| 165 | target_configdirs=`echo ${target_libs} ${target_tools}`
|
|---|
| 166 |
|
|---|
| 167 | ################################################################################
|
|---|
| 168 |
|
|---|
| 169 | srcname="gnu development package"
|
|---|
| 170 |
|
|---|
| 171 | # This gets set non-empty for some net releases of packages.
|
|---|
| 172 | appdirs=""
|
|---|
| 173 |
|
|---|
| 174 | # Define is_cross_compiler to save on calls to 'test'.
|
|---|
| 175 | is_cross_compiler=
|
|---|
| 176 | if test x"${host}" = x"${target}" ; then
|
|---|
| 177 | is_cross_compiler=no
|
|---|
| 178 | else
|
|---|
| 179 | is_cross_compiler=yes
|
|---|
| 180 | fi
|
|---|
| 181 |
|
|---|
| 182 | # We always want to use the same name for this directory, so that dejagnu
|
|---|
| 183 | # can reliably find it.
|
|---|
| 184 | target_subdir=${target_alias}
|
|---|
| 185 |
|
|---|
| 186 | if test ! -d ${target_subdir} ; then
|
|---|
| 187 | if mkdir ${target_subdir} ; then true
|
|---|
| 188 | else
|
|---|
| 189 | echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${target_subdir}" 1>&2
|
|---|
| 190 | exit 1
|
|---|
| 191 | fi
|
|---|
| 192 | fi
|
|---|
| 193 |
|
|---|
| 194 | build_prefix=build-
|
|---|
| 195 | build_subdir=${build_prefix}${build_alias}
|
|---|
| 196 |
|
|---|
| 197 | if test x"${build_alias}" != x"${host}" ; then
|
|---|
| 198 | if test ! -d ${build_subdir} ; then
|
|---|
| 199 | if mkdir ${build_subdir} ; then true
|
|---|
| 200 | else
|
|---|
| 201 | echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${build_subdir}" 1>&2
|
|---|
| 202 | exit 1
|
|---|
| 203 | fi
|
|---|
| 204 | fi
|
|---|
| 205 | fi
|
|---|
| 206 |
|
|---|
| 207 | # Skipdirs are removed silently.
|
|---|
| 208 | skipdirs=
|
|---|
| 209 | # Noconfigdirs are removed loudly.
|
|---|
| 210 | noconfigdirs=""
|
|---|
| 211 |
|
|---|
| 212 | use_gnu_ld=
|
|---|
| 213 | # Make sure we don't let GNU ld be added if we didn't want it.
|
|---|
| 214 | if test x$with_gnu_ld = xno ; then
|
|---|
| 215 | use_gnu_ld=no
|
|---|
| 216 | noconfigdirs="$noconfigdirs ld"
|
|---|
| 217 | fi
|
|---|
| 218 |
|
|---|
| 219 | use_gnu_as=
|
|---|
| 220 | # Make sure we don't let GNU as be added if we didn't want it.
|
|---|
| 221 | if test x$with_gnu_as = xno ; then
|
|---|
| 222 | use_gnu_as=no
|
|---|
| 223 | noconfigdirs="$noconfigdirs gas"
|
|---|
| 224 | fi
|
|---|
| 225 |
|
|---|
| 226 | # some tools are so dependent upon X11 that if we're not building with X,
|
|---|
| 227 | # it's not even worth trying to configure, much less build, that tool.
|
|---|
| 228 |
|
|---|
| 229 | case ${with_x} in
|
|---|
| 230 | yes | "") ;; # the default value for this tree is that X11 is available
|
|---|
| 231 | no)
|
|---|
| 232 | skipdirs="${skipdirs} tk tix itcl libgui"
|
|---|
| 233 | # We won't be able to build gdbtk without X.
|
|---|
| 234 | enable_gdbtk=no
|
|---|
| 235 | ;;
|
|---|
| 236 | *) echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;;
|
|---|
| 237 | esac
|
|---|
| 238 |
|
|---|
| 239 | # Some tools are only suitable for building in a "native" situation.
|
|---|
| 240 | # Remove these if host!=target.
|
|---|
| 241 | native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
|
|---|
| 242 |
|
|---|
| 243 | # Similarly, some are only suitable for cross toolchains.
|
|---|
| 244 | # Remove these if host=target.
|
|---|
| 245 | cross_only="target-libgloss target-newlib target-opcodes"
|
|---|
| 246 |
|
|---|
| 247 | case $is_cross_compiler in
|
|---|
| 248 | no) skipdirs="${skipdirs} ${cross_only}" ;;
|
|---|
| 249 | yes) skipdirs="${skipdirs} ${native_only}" ;;
|
|---|
| 250 | esac
|
|---|
| 251 |
|
|---|
| 252 | # If both --with-headers and --with-libs are specified, default to
|
|---|
| 253 | # --without-newlib.
|
|---|
| 254 | if test x"${with_headers}" != x && test x"${with_libs}" != x ; then
|
|---|
| 255 | if test x"${with_newlib}" = x ; then
|
|---|
| 256 | with_newlib=no
|
|---|
| 257 | fi
|
|---|
| 258 | fi
|
|---|
| 259 |
|
|---|
| 260 | # Recognize --with-newlib/--without-newlib.
|
|---|
| 261 | case ${with_newlib} in
|
|---|
| 262 | no) skipdirs="${skipdirs} target-newlib" ;;
|
|---|
| 263 | yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
|
|---|
| 264 | esac
|
|---|
| 265 |
|
|---|
| 266 | # Configure extra directories which are host specific
|
|---|
| 267 |
|
|---|
| 268 | case "${host}" in
|
|---|
| 269 | *-cygwin*)
|
|---|
| 270 | configdirs="$configdirs libtermcap" ;;
|
|---|
| 271 | esac
|
|---|
| 272 |
|
|---|
| 273 | # Remove more programs from consideration, based on the host or
|
|---|
| 274 | # target this usually means that a port of the program doesn't
|
|---|
| 275 | # exist yet.
|
|---|
| 276 |
|
|---|
| 277 | case "${host}" in
|
|---|
| 278 | hppa*64*-*-*)
|
|---|
| 279 | noconfigdirs="$noconfigdirs byacc"
|
|---|
| 280 | ;;
|
|---|
| 281 | i[[3456]]86-*-vsta)
|
|---|
| 282 | noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
|
|---|
| 283 | ;;
|
|---|
| 284 | i[[3456]]86-*-go32* | i[[3456]]86-*-msdosdjgpp*)
|
|---|
| 285 | noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
|
|---|
| 286 | ;;
|
|---|
| 287 | i[[3456]]86-*-mingw32*)
|
|---|
| 288 | # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv"
|
|---|
| 289 | noconfigdirs="expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
|
|---|
| 290 | ;;
|
|---|
| 291 | i[[3456]]86-*-beos*)
|
|---|
| 292 | noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
|
|---|
| 293 | ;;
|
|---|
| 294 | *-*-cygwin*)
|
|---|
| 295 | noconfigdirs="autoconf automake send-pr rcs guile perl"
|
|---|
| 296 | ;;
|
|---|
| 297 | *-*-netbsd*)
|
|---|
| 298 | noconfigdirs="rcs"
|
|---|
| 299 | ;;
|
|---|
| 300 | ppc*-*-pe)
|
|---|
| 301 | noconfigdirs="patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv"
|
|---|
| 302 | ;;
|
|---|
| 303 | powerpc-*-beos*)
|
|---|
| 304 | noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline"
|
|---|
| 305 | ;;
|
|---|
| 306 | *-*-darwin*)
|
|---|
| 307 | noconfigdirs="$noconfigdirs tk itcl tix libgui"
|
|---|
| 308 | ;;
|
|---|
| 309 | esac
|
|---|
| 310 |
|
|---|
| 311 | # Save it here so that, even in case of --enable-libgcj, if the Java
|
|---|
| 312 | # front-end isn't enabled, we still get libgcj disabled.
|
|---|
| 313 | libgcj_saved=$libgcj
|
|---|
| 314 | case $enable_libgcj in
|
|---|
| 315 | yes)
|
|---|
| 316 | # If we reset it here, it won't get added to noconfigdirs in the
|
|---|
| 317 | # target-specific build rules, so it will be forcibly enabled
|
|---|
| 318 | # (unless the Java language itself isn't enabled).
|
|---|
| 319 | libgcj=
|
|---|
| 320 | ;;
|
|---|
| 321 | no)
|
|---|
| 322 | # Make sure we get it printed in the list of not supported target libs.
|
|---|
| 323 | noconfigdirs="$noconfigdirs ${libgcj}"
|
|---|
| 324 | ;;
|
|---|
| 325 | esac
|
|---|
| 326 |
|
|---|
| 327 | case "${target}" in
|
|---|
| 328 | *-*-chorusos)
|
|---|
| 329 | noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
|
|---|
| 330 | ;;
|
|---|
| 331 | *-*-darwin*)
|
|---|
| 332 | noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
|
|---|
| 333 | noconfigdirs="$noconfigdirs target-libobjc ${libgcj}"
|
|---|
| 334 | ;;
|
|---|
| 335 | *-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*)
|
|---|
| 336 | noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
|
|---|
| 337 | ;;
|
|---|
| 338 | *-*-kaos*)
|
|---|
| 339 | # Remove unsupported stuff on all kaOS configurations.
|
|---|
| 340 | skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-libf2c target-librx"
|
|---|
| 341 | skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf"
|
|---|
| 342 | skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib"
|
|---|
| 343 | noconfigdirs="$noconfigdirs target-libgloss"
|
|---|
| 344 | ;;
|
|---|
| 345 | *-*-netbsd*)
|
|---|
| 346 | # Skip some stuff on all NetBSD configurations.
|
|---|
| 347 | noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss"
|
|---|
| 348 |
|
|---|
| 349 | # Skip some stuff that's unsupported on some NetBSD configurations.
|
|---|
| 350 | case "${target}" in
|
|---|
| 351 | i*86-*-netbsdelf*) ;;
|
|---|
| 352 | arm*-*-netbsdelf*) ;;
|
|---|
| 353 | *)
|
|---|
| 354 | noconfigdirs="$noconfigdirs ${libgcj}"
|
|---|
| 355 | ;;
|
|---|
| 356 | esac
|
|---|
| 357 | ;;
|
|---|
| 358 | *-*-netware)
|
|---|
| 359 | noconfigdirs="$noconfigdirs target-libstdc++-v3 target-newlib target-libiberty target-libgloss ${libgcj}"
|
|---|
| 360 | ;;
|
|---|
| 361 | *-*-rtems*)
|
|---|
| 362 | noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
|
|---|
| 363 | case ${target} in
|
|---|
| 364 | h8300*-*-* | h8500-*-*)
|
|---|
| 365 | noconfigdirs="$noconfigdirs target-libf2c"
|
|---|
| 366 | ;;
|
|---|
| 367 | *) ;;
|
|---|
| 368 | esac
|
|---|
| 369 | ;;
|
|---|
| 370 | *-*-vxworks*)
|
|---|
| 371 | noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
|
|---|
| 372 | ;;
|
|---|
| 373 | alpha*-dec-osf*)
|
|---|
| 374 | # ld works, but does not support shared libraries.
|
|---|
| 375 | # newlib is not 64 bit ready. I'm not sure about fileutils.
|
|---|
| 376 | # gas doesn't generate exception information.
|
|---|
| 377 | noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
|
|---|
| 378 | ;;
|
|---|
| 379 | alpha*-*-*vms*)
|
|---|
| 380 | noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss ${libgcj}"
|
|---|
| 381 | ;;
|
|---|
| 382 | alpha*-*-linux*)
|
|---|
| 383 | # newlib is not 64 bit ready
|
|---|
| 384 | noconfigdirs="$noconfigdirs target-newlib target-libgloss"
|
|---|
| 385 | ;;
|
|---|
| 386 | alpha*-*-freebsd*)
|
|---|
| 387 | noconfigdirs="$noconfigdirs target-newlib target-libgloss"
|
|---|
| 388 | ;;
|
|---|
| 389 | alpha*-*-*)
|
|---|
| 390 | # newlib is not 64 bit ready
|
|---|
| 391 | noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
|
|---|
| 392 | ;;
|
|---|
| 393 | sh-*-linux*)
|
|---|
| 394 | noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
|
|---|
| 395 | ;;
|
|---|
| 396 | sh*-*-pe|mips*-*-pe|*arm-wince-pe)
|
|---|
| 397 | noconfigdirs="$noconfigdirs ${libgcj}"
|
|---|
| 398 | noconfigdirs="$noconfigdirs target-examples"
|
|---|
| 399 | noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
|
|---|
| 400 | noconfigdirs="$noconfigdirs tcl tix tk itcl libgui sim"
|
|---|
| 401 | noconfigdirs="$noconfigdirs expect dejagnu"
|
|---|
| 402 | # the C++ libraries don't build on top of CE's C libraries
|
|---|
| 403 | noconfigdirs="$noconfigdirs target-libstdc++-v3"
|
|---|
| 404 | noconfigdirs="$noconfigdirs target-newlib"
|
|---|
| 405 | case "${host}" in
|
|---|
| 406 | *-*-cygwin*) ;; # keep gdb and readline
|
|---|
| 407 | *) noconfigdirs="$noconfigdirs gdb readline"
|
|---|
| 408 | ;;
|
|---|
| 409 | esac
|
|---|
| 410 | ;;
|
|---|
| 411 | arc-*-*)
|
|---|
| 412 | noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
|
|---|
| 413 | ;;
|
|---|
| 414 | arm-*-coff | strongarm-*-coff | xscale-*-coff)
|
|---|
| 415 | noconfigdirs="$noconfigdirs ${libgcj}"
|
|---|
| 416 | ;;
|
|---|
| 417 | arm-*-elf* | strongarm-*-elf* | xscale-*-elf*)
|
|---|
| 418 | noconfigdirs="$noconfigdirs target-libffi target-qthreads"
|
|---|
| 419 | ;;
|
|---|
| 420 | arm-*-pe*)
|
|---|
| 421 | noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
|
|---|
| 422 | ;;
|
|---|
| 423 | arm-*-oabi*)
|
|---|
| 424 | noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
|
|---|
| 425 | ;;
|
|---|
| 426 | thumb-*-coff)
|
|---|
| 427 | noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
|
|---|
| 428 | ;;
|
|---|
| 429 | thumb-*-elf)
|
|---|
| 430 | noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
|
|---|
| 431 | ;;
|
|---|
| 432 | thumb-*-oabi)
|
|---|
| 433 | noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
|
|---|
| 434 | ;;
|
|---|
| 435 | thumb-*-pe)
|
|---|
| 436 | noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
|
|---|
| 437 | ;;
|
|---|
| 438 | arm-*-riscix*)
|
|---|
| 439 | noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
|
|---|
| 440 | ;;
|
|---|
| 441 | avr-*-*)
|
|---|
| 442 | noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
|
|---|
| 443 | ;;
|
|---|
| 444 | c4x-*-* | tic4x-*-*)
|
|---|
| 445 | noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
|
|---|
| 446 | ;;
|
|---|
| 447 | c54x*-*-* | tic54x-*-*)
|
|---|
| 448 | noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
|
|---|
| 449 | ;;
|
|---|
| 450 | cris-*-*)
|
|---|
| 451 | noconfigdirs="$noconfigdirs ${libgcj}"
|
|---|
| 452 | ;;
|
|---|
| 453 | d10v-*-*)
|
|---|
| 454 | noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
|
|---|
| 455 | ;;
|
|---|
| 456 | d30v-*-*)
|
|---|
| 457 | noconfigdirs="$noconfigdirs ${libgcj}"
|
|---|
| 458 | ;;
|
|---|
| 459 | fr30-*-elf*)
|
|---|
| 460 | noconfigdirs="$noconfigdirs ${libgcj}"
|
|---|
| 461 | ;;
|
|---|
| 462 | frv-*-*)
|
|---|
| 463 | noconfigdirs="$noconfigdirs ${libgcj}"
|
|---|
| 464 | ;;
|
|---|
| 465 | h8300*-*-*)
|
|---|
| 466 | noconfigdirs="$noconfigdirs target-libgloss"
|
|---|
| 467 | ;;
|
|---|
| 468 | h8500-*-*)
|
|---|
| 469 | noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} target-libf2c"
|
|---|
| 470 | ;;
|
|---|
| 471 | hppa*64*-*-linux* | parisc*64*-*-linux*)
|
|---|
| 472 | # In this case, it's because the hppa64-linux target is for
|
|---|
| 473 | # the kernel only at this point and has no libc, and thus no
|
|---|
| 474 | # headers, crt*.o, etc., all of which are needed by these.
|
|---|
| 475 | noconfigdirs="$noconfigdirs target-zlib"
|
|---|
| 476 | ;;
|
|---|
| 477 | hppa*-*-*elf* | \
|
|---|
| 478 | parisc*-*-linux* | hppa*-*-linux* | \
|
|---|
| 479 | hppa*-*-lites* | \
|
|---|
| 480 | hppa*-*-openbsd* | \
|
|---|
| 481 | hppa*64*-*-*)
|
|---|
| 482 | noconfigdirs="$noconfigdirs ${libgcj}"
|
|---|
| 483 | # Do configure ld/binutils/gas for this case.
|
|---|
| 484 | ;;
|
|---|
| 485 | hppa*-*-*)
|
|---|
| 486 | # According to Alexandre Oliva <[email protected]>, libjava won't
|
|---|
| 487 | # build on HP-UX 10.20.
|
|---|
| 488 | noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
|
|---|
| 489 | ;;
|
|---|
| 490 | ia64*-*-elf*)
|
|---|
| 491 | # No gdb support yet.
|
|---|
| 492 | noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
|
|---|
| 493 | ;;
|
|---|
| 494 | ia64*-**-hpux*)
|
|---|
| 495 | # No gdb or ld support yet.
|
|---|
| 496 | noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb ld"
|
|---|
| 497 | ;;
|
|---|
| 498 | i[[3456]]86-*-coff | i[[3456]]86-*-elf)
|
|---|
| 499 | noconfigdirs="$noconfigdirs ${libgcj}"
|
|---|
| 500 | ;;
|
|---|
| 501 | i[[34567]]86-*-freebsd*)
|
|---|
| 502 | noconfigdirs="$noconfigdirs target-newlib target-libgloss"
|
|---|
| 503 | ;;
|
|---|
| 504 | i[[3456]]86-*-linux*)
|
|---|
| 505 | # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
|
|---|
| 506 | # not build java stuff by default.
|
|---|
| 507 | case "${target}" in
|
|---|
| 508 | *-*-*libc1*)
|
|---|
| 509 | noconfigdirs="$noconfigdirs ${libgcj}";;
|
|---|
| 510 | esac
|
|---|
| 511 |
|
|---|
| 512 | # This section makes it possible to build newlib natively on linux.
|
|---|
| 513 | # If we are using a cross compiler then don't configure newlib.
|
|---|
| 514 | if test x${is_cross_compiler} != xno ; then
|
|---|
| 515 | noconfigdirs="$noconfigdirs target-newlib"
|
|---|
| 516 | fi
|
|---|
| 517 | noconfigdirs="$noconfigdirs target-libgloss"
|
|---|
| 518 | # If we are not using a cross compiler, do configure newlib.
|
|---|
| 519 | # Note however, that newlib will only be configured in this situation
|
|---|
| 520 | # if the --with-newlib option has been given, because otherwise
|
|---|
| 521 | # 'target-newlib' will appear in skipdirs.
|
|---|
| 522 | ;;
|
|---|
| 523 | i[[3456]]86-*-mingw32*)
|
|---|
| 524 | target_configdirs="$target_configdirs target-mingw"
|
|---|
| 525 | noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
|
|---|
| 526 |
|
|---|
| 527 | # Can't build gdb for mingw32 if not native.
|
|---|
| 528 | case "${host}" in
|
|---|
| 529 | i[[3456]]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
|
|---|
| 530 | *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix gnuserv"
|
|---|
| 531 | ;;
|
|---|
| 532 | esac
|
|---|
| 533 | ;;
|
|---|
| 534 | *-*-cygwin*)
|
|---|
| 535 | target_configdirs="$target_configdirs target-libtermcap target-winsup"
|
|---|
| 536 | noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
|
|---|
| 537 | # always build newlib.
|
|---|
| 538 | skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
|
|---|
| 539 |
|
|---|
| 540 | # Can't build gdb for Cygwin if not native.
|
|---|
| 541 | case "${host}" in
|
|---|
| 542 | *-*-cygwin*) ;; # keep gdb tcl tk expect etc.
|
|---|
| 543 | *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix libgui gnuserv"
|
|---|
| 544 | ;;
|
|---|
| 545 | esac
|
|---|
| 546 | ;;
|
|---|
| 547 | i[[3456]]86-*-pe)
|
|---|
| 548 | noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
|
|---|
| 549 | ;;
|
|---|
| 550 | i[[3456]]86-*-sco3.2v5*)
|
|---|
| 551 | # The linker does not yet know about weak symbols in COFF,
|
|---|
| 552 | # and is not configured to handle mixed ELF and COFF.
|
|---|
| 553 | noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
|
|---|
| 554 | ;;
|
|---|
| 555 | i[[3456]]86-*-sco*)
|
|---|
| 556 | noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
|
|---|
| 557 | ;;
|
|---|
| 558 | i[[3456]]86-*-solaris2*)
|
|---|
| 559 | noconfigdirs="$noconfigdirs target-libgloss"
|
|---|
| 560 | ;;
|
|---|
| 561 | i[[3456]]86-*-sysv4*)
|
|---|
| 562 | noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
|
|---|
| 563 | ;;
|
|---|
| 564 | i[[3456]]86-*-beos*)
|
|---|
| 565 | noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
|
|---|
| 566 | ;;
|
|---|
| 567 | m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
|
|---|
| 568 | noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
|
|---|
| 569 | ;;
|
|---|
| 570 | m68k-*-elf*)
|
|---|
| 571 | noconfigdirs="$noconfigdirs ${libgcj}"
|
|---|
| 572 | ;;
|
|---|
| 573 | m68k-*-coff*)
|
|---|
| 574 | noconfigdirs="$noconfigdirs ${libgcj}"
|
|---|
| 575 | ;;
|
|---|
| 576 | mcore-*-pe*)
|
|---|
| 577 | # The EPOC C++ environment does not support exceptions or rtti,
|
|---|
| 578 | # and so building libstdc++-v3 tends not to always work.
|
|---|
| 579 | noconfigdirs="$noconfigdirs target-libstdc++-v3"
|
|---|
| 580 | ;;
|
|---|
| 581 | mmix-*-*)
|
|---|
| 582 | noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss"
|
|---|
| 583 | ;;
|
|---|
| 584 | mn10200-*-*)
|
|---|
| 585 | noconfigdirs="$noconfigdirs ${libgcj}"
|
|---|
| 586 | ;;
|
|---|
| 587 | mn10300-*-*)
|
|---|
| 588 | noconfigdirs="$noconfigdirs ${libgcj}"
|
|---|
| 589 | ;;
|
|---|
| 590 | powerpc-*-aix*)
|
|---|
| 591 | # copied from rs6000-*-* entry
|
|---|
| 592 | noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
|
|---|
| 593 | ;;
|
|---|
| 594 | powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
|
|---|
| 595 | target_configdirs="$target_configdirs target-winsup"
|
|---|
| 596 | noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix gnuserv ${libgcj}"
|
|---|
| 597 | # always build newlib.
|
|---|
| 598 | skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
|
|---|
| 599 | ;;
|
|---|
| 600 | # This is temporary until we can link against shared libraries
|
|---|
| 601 | powerpcle-*-solaris*)
|
|---|
| 602 | noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix gnuserv ${libgcj}"
|
|---|
| 603 | ;;
|
|---|
| 604 | powerpc-*-beos*)
|
|---|
| 605 | noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
|
|---|
| 606 | ;;
|
|---|
| 607 | powerpc-*-eabi)
|
|---|
| 608 | noconfigdirs="$noconfigdirs ${libgcj}"
|
|---|
| 609 | ;;
|
|---|
| 610 | rs6000-*-lynxos*)
|
|---|
| 611 | noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
|
|---|
| 612 | ;;
|
|---|
| 613 | rs6000-*-aix*)
|
|---|
| 614 | noconfigdirs="$noconfigdirs gprof ${libgcj}"
|
|---|
| 615 | ;;
|
|---|
| 616 | rs6000-*-*)
|
|---|
| 617 | noconfigdirs="$noconfigdirs gprof ${libgcj}"
|
|---|
| 618 | ;;
|
|---|
| 619 | m68k-apollo-*)
|
|---|
| 620 | noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
|
|---|
| 621 | ;;
|
|---|
| 622 | mips*-*-irix5*)
|
|---|
| 623 | # The GNU linker does not support shared libraries.
|
|---|
| 624 | noconfigdirs="$noconfigdirs ld gprof target-libgloss ${libgcj}"
|
|---|
| 625 | ;;
|
|---|
| 626 | mips*-*-irix6*)
|
|---|
| 627 | # Linking libjava exceeds command-line length limits on at least
|
|---|
| 628 | # IRIX 6.2, but not on IRIX 6.5.
|
|---|
| 629 | # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
|
|---|
| 630 | # <[email protected]>
|
|---|
| 631 | noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
|
|---|
| 632 | ;;
|
|---|
| 633 | mips*-dec-bsd*)
|
|---|
| 634 | noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
|
|---|
| 635 | ;;
|
|---|
| 636 | mips*-*-bsd*)
|
|---|
| 637 | noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
|
|---|
| 638 | ;;
|
|---|
| 639 | mipstx39-*-*)
|
|---|
| 640 | noconfigdirs="$noconfigdirs gprof ${libgcj}" # same as generic mips
|
|---|
| 641 | ;;
|
|---|
| 642 | mips*-*-linux*)
|
|---|
| 643 | noconfigdirs="$noconfigdirs target-newlib target-libgloss"
|
|---|
| 644 | ;;
|
|---|
| 645 | mips*-*-*)
|
|---|
| 646 | noconfigdirs="$noconfigdirs gprof ${libgcj}"
|
|---|
| 647 | ;;
|
|---|
| 648 | romp-*-*)
|
|---|
| 649 | noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
|
|---|
| 650 | ;;
|
|---|
| 651 | sh-*-*)
|
|---|
| 652 | case "${host}" in
|
|---|
| 653 | i[[3456]]86-*-vsta) ;; # don't add gprof back in
|
|---|
| 654 | i[[3456]]86-*-go32*) ;; # don't add gprof back in
|
|---|
| 655 | i[[3456]]86-*-msdosdjgpp*) ;; # don't add gprof back in
|
|---|
| 656 | *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
|
|---|
| 657 | esac
|
|---|
| 658 | noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
|
|---|
| 659 | ;;
|
|---|
| 660 | sh64-*-*)
|
|---|
| 661 | noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
|
|---|
| 662 | ;;
|
|---|
| 663 | sparc-*-elf*)
|
|---|
| 664 | noconfigdirs="$noconfigdirs ${libgcj}"
|
|---|
| 665 | ;;
|
|---|
| 666 | sparc64-*-elf*)
|
|---|
| 667 | noconfigdirs="$noconfigdirs ${libgcj}"
|
|---|
| 668 | ;;
|
|---|
| 669 | sparclite-*-*)
|
|---|
| 670 | noconfigdirs="$noconfigdirs ${libgcj}"
|
|---|
| 671 | ;;
|
|---|
| 672 | sparc-*-sunos4*)
|
|---|
| 673 | noconfigdirs="$noconfigdirs ${libgcj}"
|
|---|
| 674 | if test x${is_cross_compiler} != xno ; then
|
|---|
| 675 | noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
|
|---|
| 676 | else
|
|---|
| 677 | use_gnu_ld=no
|
|---|
| 678 | fi
|
|---|
| 679 | ;;
|
|---|
| 680 | sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
|
|---|
| 681 | ;;
|
|---|
| 682 | v810-*-*)
|
|---|
| 683 | noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
|
|---|
| 684 | ;;
|
|---|
| 685 | v850-*-*)
|
|---|
| 686 | noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
|
|---|
| 687 | ;;
|
|---|
| 688 | v850e-*-*)
|
|---|
| 689 | noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
|
|---|
| 690 | ;;
|
|---|
| 691 | v850ea-*-*)
|
|---|
| 692 | noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
|
|---|
| 693 | ;;
|
|---|
| 694 | vax-*-vms)
|
|---|
| 695 | noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}"
|
|---|
| 696 | ;;
|
|---|
| 697 | vax-*-*)
|
|---|
| 698 | noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
|
|---|
| 699 | ;;
|
|---|
| 700 | ip2k-*-*)
|
|---|
| 701 | noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
|
|---|
| 702 | ;;
|
|---|
| 703 | *-*-linux*)
|
|---|
| 704 | noconfigdirs="$noconfigdirs target-newlib target-libgloss"
|
|---|
| 705 | ;;
|
|---|
| 706 | *-*-lynxos*)
|
|---|
| 707 | noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
|
|---|
| 708 | ;;
|
|---|
| 709 | *-*-*)
|
|---|
| 710 | noconfigdirs="$noconfigdirs ${libgcj}"
|
|---|
| 711 | ;;
|
|---|
| 712 | esac
|
|---|
| 713 |
|
|---|
| 714 | # If we aren't building newlib, then don't build libgloss, since libgloss
|
|---|
| 715 | # depends upon some newlib header files.
|
|---|
| 716 | case "${noconfigdirs}" in
|
|---|
| 717 | *target-libgloss*) ;;
|
|---|
| 718 | *target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
|
|---|
| 719 | esac
|
|---|
|
|---|
