| [3181] | 1 | # This file is read by Makefile.SH to produce rules for $(LIBPERL) (and
|
|---|
| 2 | # some additional rules as well).
|
|---|
| 3 |
|
|---|
| 4 | # Rerun `sh Makefile.SH; make depend' after making any change.
|
|---|
| 5 |
|
|---|
| 6 | # Additional rules supported: perl_, aout_test, aout_install, use them
|
|---|
| 7 | # for a.out style perl (which may fork).
|
|---|
| 8 |
|
|---|
| 9 | perl_fullversion="5.00${PERL_VERSION}_$PERL_SUBVERSION"
|
|---|
| 10 | case "$archname" in
|
|---|
| 11 | *-thread*) perl_fullversion="${perl_fullversion}-threaded";;
|
|---|
| 12 | esac
|
|---|
| 13 |
|
|---|
| 14 | dll_post="`echo $perl_fullversion | sum | sed -e 's/^0*//' | awk '{print $1}'`"
|
|---|
| 15 | dll_post="`printf '%x' $dll_post | tr '[a-z]' '[A-Z]'`"
|
|---|
| 16 |
|
|---|
| 17 | aout_extra_libs=''
|
|---|
| 18 | aout_extra_sep=''
|
|---|
| 19 | for xxx in $aout_extra_static_ext; do
|
|---|
| 20 | aout_extra_dir=`echo "$xxx" | sed -e 's/::/\//g'`
|
|---|
| 21 | aout_extra_lib="lib/auto/$aout_extra_dir/"`basename "$aout_extra_dir"`
|
|---|
| 22 | aout_extra_libs="$aout_extra_libs$aout_extra_sep$aout_extra_lib$aout_lib_ext"
|
|---|
| 23 | aout_extra_sep=' '
|
|---|
| 24 | done
|
|---|
| 25 |
|
|---|
| 26 | $spitshell >>Makefile <<!GROK!THIS!
|
|---|
| 27 |
|
|---|
| 28 | PERL_FULLVERSION = $perl_fullversion
|
|---|
| 29 |
|
|---|
| 30 | AOUT_OPTIMIZE = \$(OPTIMIZE)
|
|---|
| 31 | AOUT_CCCMD = \$(CC) -DPERL_CORE $aout_ccflags \$(AOUT_OPTIMIZE)
|
|---|
| 32 | AOUT_AR = $aout_ar
|
|---|
| 33 | AOUT_OBJ_EXT = $aout_obj_ext
|
|---|
| 34 | AOUT_LIB_EXT = $aout_lib_ext
|
|---|
| 35 | AOUT_LIBPERL = libperl$aout_lib_ext
|
|---|
| 36 | AOUT_CLDFLAGS = $aout_ldflags
|
|---|
| 37 |
|
|---|
| 38 | AOUT_LIBPERL_DLL = libperl_dll$aout_lib_ext
|
|---|
| 39 | AOUT_CCCMD_DLL = \$(CC) -DDOSISH -DOS2=2 -DEMBED -I. -DPACK_MALLOC -DDEBUGGING_MSTATS -DTWO_POT_OPTIMIZE -DPERL_EMERGENCY_SBRK
|
|---|
| 40 | AOUT_CLDFLAGS_DLL = -Zexe -Zmt -Zcrtdll -Zstack 32000
|
|---|
| 41 |
|
|---|
| 42 | # No -DPERL_CORE
|
|---|
| 43 | SO_CCCMD = \$(CC) $ccflags \$(OPTIMIZE)
|
|---|
| 44 |
|
|---|
| [3188] | 45 | LD_OPT =
|
|---|
| 46 | PERL_DLL_LD_OPT = -Zdll -Zmap -Zargs-wild
|
|---|
| [3181] | 47 |
|
|---|
| 48 | PERL_DLL_BASE = perl$dll_post
|
|---|
| 49 | PERL_DLL = \$(PERL_DLL_BASE)\$(DLSUFFIX)
|
|---|
| 50 | TEST_PERL_DLL = perl_dll_t
|
|---|
| 51 | CONFIG_ARGS = $config_args
|
|---|
| 52 | AOUT_EXTRA_LIBS = $aout_extra_libs
|
|---|
| 53 |
|
|---|
| 54 | !GROK!THIS!
|
|---|
| 55 |
|
|---|
| 56 | $spitshell >>Makefile <<'!NO!SUBS!'
|
|---|
| 57 | PREPLIBRARY_LIBPERL = $(LIBPERL)
|
|---|
| 58 | $(LIBPERL): perl.imp perl5.def libperl_override.lib
|
|---|
| 59 | emximp -o $(LIBPERL) perl.imp
|
|---|
| 60 | cp $(LIBPERL) perl.lib
|
|---|
| 61 |
|
|---|
| 62 | imp_version: $(FIRSTMAKEFILE)
|
|---|
| 63 | echo $(PERL_DLL_BASE) > $@
|
|---|
| 64 |
|
|---|
| 65 | libperl_override.imp: os2/os2add.sym miniperl imp_version
|
|---|
| 66 | ./miniperl -wnle 'print "$$_\t$(PERL_DLL_BASE)\t$$_\t?"' os2/os2add.sym > $@
|
|---|
| 67 | echo 'strdup $(PERL_DLL_BASE) Perl_strdup ?' >> $@
|
|---|
| 68 | echo 'putenv $(PERL_DLL_BASE) Perl_putenv ?' >> $@
|
|---|
| 69 |
|
|---|
| 70 | libperl_override.lib: libperl_override.imp
|
|---|
| 71 | emximp -o $@ libperl_override.imp
|
|---|
| 72 |
|
|---|
| 73 | libperl_dllmain.imp: imp_version
|
|---|
| [3194] | 74 | echo '_main $(PERL_DLL_BASE) _dll_perlmain ?' > $@
|
|---|
| [3181] | 75 |
|
|---|
| 76 | libperl_dllmain.lib: libperl_dllmain.imp
|
|---|
| 77 | emximp -o $@ libperl_dllmain.imp
|
|---|
| 78 |
|
|---|
| 79 | libperl_dllmain.a: libperl_dllmain.imp
|
|---|
| 80 | emximp -o $@ libperl_dllmain.imp
|
|---|
| 81 |
|
|---|
| 82 | $(AOUT_LIBPERL_DLL): perl.imp $(PERL_DLL) perl5.def
|
|---|
| 83 | emximp -o $(AOUT_LIBPERL_DLL) perl.imp
|
|---|
| 84 |
|
|---|
| 85 | perl.imp: perl5.def imp_version
|
|---|
| 86 | emximp -o perl.imp perl5.def
|
|---|
| [3198] | 87 | # echo 'emx_calloc emxlibcm 400 ?' >> $@
|
|---|
| 88 | # echo 'emx_free emxlibcm 401 ?' >> $@
|
|---|
| 89 | # echo 'emx_malloc emxlibcm 402 ?' >> $@
|
|---|
| 90 | # echo 'emx_realloc emxlibcm 403 ?' >> $@
|
|---|
| [3181] | 91 |
|
|---|
| 92 | .PHONY: perl_dll installcmd aout_clean aout_install aout_install.perl \
|
|---|
| 93 | perlrexx test_prep_perl_ test_prep_perl_sys test_prep_perl_stat \
|
|---|
| 94 | test_prep_perl_stat_aout test_prep_various \
|
|---|
| 95 | stat_aout_harness aout_harness stat_harness sys_harness all_harness \
|
|---|
| 96 | stat_aout_test aout_test stat_test sys_test all_test \
|
|---|
| 97 | perl___harness test_harness_redir
|
|---|
| 98 |
|
|---|
| 99 | perl_dll: $(PERL_DLL)
|
|---|
| 100 |
|
|---|
| 101 | perl_dll_t: t/$(PERL_DLL)
|
|---|
| 102 |
|
|---|
| 103 | t/$(PERL_DLL): $(PERL_DLL)
|
|---|
| 104 | $(LNS) $(PERL_DLL) t/$(PERL_DLL)
|
|---|
| 105 |
|
|---|
| 106 | $(PERL_DLL): $(obj) perl5.def perl$(OBJ_EXT) perlmain$(OBJ_EXT) $(DYNALOADER)
|
|---|
| 107 | $(LD) $(LD_OPT) $(LDDLFLAGS) $(PERL_DLL_LD_OPT) -o $@ perl$(OBJ_EXT) $(obj) perlmain$(OBJ_EXT) $(DYNALOADER) $(libs) perl5.def || ( rm $(PERL_DLL) && sh -c false )
|
|---|
| 108 |
|
|---|
| 109 | perl5.olddef: perl.linkexp
|
|---|
| 110 | echo "LIBRARY '$(PERL_DLL_BASE)' INITINSTANCE TERMINSTANCE" > $@
|
|---|
| 111 | echo DESCRIPTION "'Perl interpreter v$(PERL_FULLVERSION), export autogenerated'" >>$@
|
|---|
| 112 | echo STACKSIZE 32768 >>$@
|
|---|
| 113 | echo CODE LOADONCALL >>$@
|
|---|
| 114 | echo DATA LOADONCALL NONSHARED MULTIPLE >>$@
|
|---|
| 115 | echo EXPORTS >>$@
|
|---|
| 116 | !NO!SUBS!
|
|---|
| 117 |
|
|---|
| 118 | if [ ! -z "$myttyname" ] ; then
|
|---|
| 119 | $spitshell >>Makefile <<'!NO!SUBS!'
|
|---|
| 120 | echo ' "ttyname"' >>$@
|
|---|
| 121 | !NO!SUBS!
|
|---|
| 122 | fi
|
|---|
| 123 |
|
|---|
| 124 | $spitshell >>Makefile <<'!NO!SUBS!'
|
|---|
| 125 | cat perl.linkexp >>$@
|
|---|
| 126 |
|
|---|
| 127 | # grep -v '"\(malloc\|realloc\|free\)"' perl.linkexp >>$@
|
|---|
| 128 |
|
|---|
| 129 |
|
|---|
| 130 | perl.exports: perl.exp EXTERN.h perl.h
|
|---|
| 131 | (echo "#include \"EXTERN.h\" \n#include \"perl.h\" \n#include \"perl.exp\""; \
|
|---|
| 132 | echo "malloc\nrealloc\ncalloc\nfree") | \
|
|---|
| 133 | $(CC) -DEMBED -E - | \
|
|---|
| 134 | awk '{if ($$2 == "") print $$1}' | sort | uniq > $@
|
|---|
| 135 |
|
|---|
| 136 | perl.linkexp: perl.exports perl.map os2/os2.sym
|
|---|
| 137 | cat perl.exports os2/os2.sym perl.map | sort | uniq -d | sed -e 's/\w\+/ "\0"/' > perl.linkexp
|
|---|
| 138 |
|
|---|
| 139 | # We link miniperl statically, since .DLL depends on $(DYNALOADER)
|
|---|
| 140 |
|
|---|
| 141 | miniperl.map: miniperl
|
|---|
| 142 |
|
|---|
| 143 | miniperl.exe: miniperl
|
|---|
| 144 |
|
|---|
| 145 | miniperl: $(obj) perl$(OBJ_EXT) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT)
|
|---|
| [3188] | 146 | $(CC) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) perl$(OBJ_EXT) `echo $(obj)|sed -e 's/\bop\./opmini./g'` $(libs) -Zmap -Zargs-wild
|
|---|
| [3181] | 147 | @./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
|
|---|
| 148 |
|
|---|
| 149 | depend: os2ish.h dlfcn.h os2thread.h os2.c
|
|---|
| 150 |
|
|---|
| 151 | # Stupid make? Needed...
|
|---|
| 152 | os2$(OBJ_EXT) : os2.c
|
|---|
| 153 |
|
|---|
| 154 | os2.c: os2/os2.c os2ish.h
|
|---|
| 155 | cp -f $< $@
|
|---|
| 156 |
|
|---|
| 157 | dl_os2.c: os2/dl_os2.c os2ish.h
|
|---|
| 158 | cp -f $< $@
|
|---|
| 159 |
|
|---|
| 160 | os2ish.h: os2/os2ish.h
|
|---|
| 161 | cp -f $< $@
|
|---|
| 162 |
|
|---|
| 163 | os2thread.h: os2/os2thread.h
|
|---|
| 164 | cp -f $< $@
|
|---|
| 165 |
|
|---|
| 166 | dlfcn.h: os2/dlfcn.h
|
|---|
| 167 | cp -f $< $@
|
|---|
| 168 |
|
|---|
| 169 | # Non-Forking dynamically loaded perl
|
|---|
| 170 | # Make many: they are useful in low-memory conditions (floppy boot? Lot of shared memory used?)
|
|---|
| 171 |
|
|---|
| 172 | perl___$(EXE_EXT) perl___: $& libperl_dllmain$(LIB_EXT)
|
|---|
| [3188] | 173 | $(SHRPENV) $(CC) $(CLDFLAGS) $(CCDLFLAGS) -o perl___ libperl_dllmain$(LIB_EXT)
|
|---|
| 174 | $(SHRPENV) $(CC) $(CLDFLAGS) $(CCDLFLAGS) -Zstack 8192 -o perl___8 libperl_dllmain$(LIB_EXT)
|
|---|
| 175 | $(SHRPENV) $(CC) $(CLDFLAGS) $(CCDLFLAGS) -Zstack 4096 -o perl___4 libperl_dllmain$(LIB_EXT)
|
|---|
| 176 | $(SHRPENV) $(CC) $(CLDFLAGS) $(CCDLFLAGS) -Zstack 2048 -o perl___2 libperl_dllmain$(LIB_EXT)
|
|---|
| 177 | $(SHRPENV) $(CC) $(CLDFLAGS) $(CCDLFLAGS) -Zstack 1024 -o perl___1 libperl_dllmain$(LIB_EXT)
|
|---|
| 178 | $(SHRPENV) $(CC) $(CLDFLAGS) $(CCDLFLAGS) -Zstack 512 -o perl___05 libperl_dllmain$(LIB_EXT)
|
|---|
| 179 | $(SHRPENV) $(CC) $(CLDFLAGS) $(CCDLFLAGS) -Zstack 320 -o perl___03 libperl_dllmain$(LIB_EXT)
|
|---|
| [3181] | 180 |
|
|---|
| 181 | # This one is compiled -Zsys, so cannot do many things:
|
|---|
| 182 |
|
|---|
| 183 | # Remove -Zcrtdll
|
|---|
| 184 | STAT_CLDFLAGS = -Zexe -Zomf -Zmt -Zstack 32000
|
|---|
| 185 |
|
|---|
| 186 | # Non-forking dynamically loaded perl with a wrong CRT library:
|
|---|
| 187 |
|
|---|
| 188 | perl_stat perl_stat$(EXE_EXT): $& libperl_dllmain$(LIB_EXT)
|
|---|
| [3188] | 189 | $(SHRPENV) $(CC) $(STAT_CLDFLAGS) $(CCDLFLAGS) -o perl_stat libperl_dllmain$(LIB_EXT)
|
|---|
| [3181] | 190 |
|
|---|
| 191 | # Remove -Zcrtdll, add -Zsys
|
|---|
| 192 | SYS_CLDFLAGS = $(STAT_CLDFLAGS) -Zsys
|
|---|
| 193 |
|
|---|
| 194 | # Non-Forking dynamically loaded perl without EMX - so with wrong CRT library
|
|---|
| 195 |
|
|---|
| 196 | perl_sys perl_sys$(EXE_EXT): $& libperl_dllmain$(LIB_EXT)
|
|---|
| [3188] | 197 | $(SHRPENV) $(CC) $(SYS_CLDFLAGS) $(CCDLFLAGS) -o perl_sys libperl_dllmain$(LIB_EXT)
|
|---|
| [3181] | 198 |
|
|---|
| 199 | installcmd :
|
|---|
| 200 | @perl -e 'die qq{Give the option INSTALLCMDDIR=... to make!} if $$ARGV[0] eq ""' $(INSTALLCMDDIR)
|
|---|
| 201 | ./miniperl -Ilib os2/perl2cmd.pl $(INSTALLCMDDIR)
|
|---|
| 202 |
|
|---|
| 203 | # Aout section:
|
|---|
| 204 |
|
|---|
| 205 | aout_obj = $(addsuffix $(AOUT_OBJ_EXT),$(basename $(obj)))
|
|---|
| 206 | AOUT_DYNALOADER = $(addsuffix $(AOUT_LIB_EXT),$(basename $(DYNALOADER)))
|
|---|
| 207 | aout_ext = $(static_ext) $(dynamic_ext) $(AOUT_EXTRA_LIBS)
|
|---|
| 208 | aout_static_ext = $(addsuffix $(AOUT_LIB_EXT),$(basename $(aout_ext)))
|
|---|
| 209 | aout_static_lib = $(addsuffix $(LIB_EXT),$(basename $(aout_ext)))
|
|---|
| 210 |
|
|---|
| 211 | aout_static_ext_dll = $(addsuffix $(AOUT_LIB_EXT),$(basename $(static_ext)))
|
|---|
| 212 | DYNALOADER_OBJ = ext/DynaLoader/DynaLoader$(OBJ_EXT)
|
|---|
| 213 | aout_static_ext_dll = $(addsuffix $(AOUT_LIB_EXT),$(basename $(static_ext)))
|
|---|
| 214 | AOUT_DYNALOADER_OBJ = $(addsuffix $(AOUT_OBJ_EXT),$(basename $(DYNALOADER_OBJ)))
|
|---|
| 215 |
|
|---|
| [3198] | 216 | ifneq ($(OBJ_EXT),$(AOUT_OBJ_EXT))
|
|---|
| [3181] | 217 | $(AOUT_DYNALOADER_OBJ) : $(DYNALOADER_OBJ)
|
|---|
| 218 | emxaout -o $@ $<
|
|---|
| [3198] | 219 | endif
|
|---|
| [3181] | 220 |
|
|---|
| 221 | $(DYNALOADER_OBJ) : $(DYNALOADER)
|
|---|
| 222 | @sh -c true
|
|---|
| 223 |
|
|---|
| 224 | $(AOUT_LIBPERL) : $(aout_obj) perl$(AOUT_OBJ_EXT)
|
|---|
| 225 | rm -f $@
|
|---|
| 226 | $(AOUT_AR) rcu $@ perl$(AOUT_OBJ_EXT) $(aout_obj)
|
|---|
| 227 | cp $@ perl$(AOUT_LIB_EXT)
|
|---|
| 228 |
|
|---|
| [3198] | 229 | ifneq ($(OBJ_EXT),$(AOUT_OBJ_EXT))
|
|---|
| 230 |
|
|---|
| [3181] | 231 | .c$(AOUT_OBJ_EXT):
|
|---|
| 232 | $(AOUT_CCCMD) $(PLDLFLAGS) -c $*.c
|
|---|
| 233 |
|
|---|
| 234 | opmini$(AOUT_OBJ_EXT): op.c
|
|---|
| 235 | $(AOUT_CCCMD) $(PLDLFLAGS) -DPERL_EXTERNAL_GLOB -o opmini$(AOUT_OBJ_EXT) -c op.c
|
|---|
| 236 |
|
|---|
| 237 | perlmain(AOUT_OBJ_EXT): perlmain.c
|
|---|
| 238 | $(AOUT_CCCMD_DLL) $(PLDLFLAGS) -c perlmain.c
|
|---|
| [3198] | 239 |
|
|---|
| 240 | endif
|
|---|
| [3181] | 241 |
|
|---|
| 242 | # Assume that extensions are at most 4 deep (this is so with 5.8.1)
|
|---|
| 243 | aout_extlist: $(aout_static_ext) $(AOUT_DYNALOADER)
|
|---|
| 244 | echo lib/auto/*.a lib/auto/*/*.a lib/auto/*/*/*.a lib/auto/*/*/*/*.a | tr ' ' '\n' | grep -v '\*' > $@
|
|---|
| 245 |
|
|---|
| 246 | aout_perlmain.c: miniperlmain.c config.sh makefile $(static_ext_autoinit) $(aout_static_ext) writemain aout_extlist
|
|---|
| 247 | sh writemain `cat aout_extlist` > aout_perlmain.c
|
|---|
| 248 |
|
|---|
| 249 | _preplibrary = miniperl lib/Config.pm lib/lib.pm lib/re.pm
|
|---|
| 250 |
|
|---|
| 251 | miniperl_: $& miniperlmain$(AOUT_OBJ_EXT) $(AOUT_LIBPERL) opmini$(AOUT_OBJ_EXT) $(_preplibrary)
|
|---|
| 252 | $(CC) $(AOUT_CLDFLAGS) $(CCDLFLAGS) -o miniperl_ miniperlmain$(AOUT_OBJ_EXT) opmini$(AOUT_OBJ_EXT) $(AOUT_LIBPERL) $(libs)
|
|---|
| 253 |
|
|---|
| 254 | # Forking statically loaded perl
|
|---|
| 255 |
|
|---|
| 256 | # Need a miniperl_ dependency, since $(AOUT_DYNALOADER) is build via implicit
|
|---|
| 257 | # rules, thus would not rebuild miniperl_ via an explicit rule
|
|---|
| 258 |
|
|---|
| 259 | perl_$(EXE_EXT) perl_: $& miniperl_ aout_perlmain$(AOUT_OBJ_EXT) $(AOUT_LIBPERL) $(AOUT_DYNALOADER) $(aout_static_ext) ext.libs aout_extlist
|
|---|
| 260 | $(CC) $(AOUT_CLDFLAGS) $(CCDLFLAGS) $(OPTIMIZE) -o perl_ aout_perlmain$(AOUT_OBJ_EXT) `cat aout_extlist` $(AOUT_LIBPERL) `cat ext.libs` $(libs)
|
|---|
| 261 |
|
|---|
| 262 | # Remove -Zcrtdll
|
|---|
| 263 | STAT_AOUT_CLDFLAGS = -Zexe -Zmt -Zstack 32000
|
|---|
| 264 |
|
|---|
| |
|---|
