| 1 | # This file is read by Makefile.SH to produce rules for $(LIBPERL) (and
|
|---|
| 2 | # some additional rules as well).
|
|---|
| 3 |
|
|---|
| 4 | # Rerun `sh Makefile.SH; make depend' after making any change.
|
|---|
| 5 |
|
|---|
| 6 | # Additional rules supported: libperls.a (for static linking),
|
|---|
| 7 | # ld2, perlld (dynamic linking tools)
|
|---|
| 8 | #
|
|---|
| 9 |
|
|---|
| 10 | #! /bin/sh
|
|---|
| 11 | case $PERL_CONFIG_SH in
|
|---|
| 12 | '')
|
|---|
| 13 | if test -f config.sh; then TOP=.;
|
|---|
| 14 | elif test -f ../config.sh; then TOP=..;
|
|---|
| 15 | elif test -f ../../config.sh; then TOP=../..;
|
|---|
| 16 | elif test -f ../../../config.sh; then TOP=../../..;
|
|---|
| 17 | elif test -f ../../../../config.sh; then TOP=../../../..;
|
|---|
| 18 | else
|
|---|
| 19 | echo "Can't find config.sh."; exit 1
|
|---|
| 20 | fi
|
|---|
| 21 | . $TOP/config.sh
|
|---|
| 22 | ;;
|
|---|
| 23 | esac
|
|---|
| 24 |
|
|---|
| 25 | addtopath=`pwd`
|
|---|
| 26 | $spitshell >>Makefile <<!GROK!THIS!
|
|---|
| 27 |
|
|---|
| 28 | cygwin.c: cygwin/cygwin.c
|
|---|
| 29 | \$(LNS) cygwin/cygwin.c
|
|---|
| 30 |
|
|---|
| 31 | # shell script feeding perlld to decent perl
|
|---|
| 32 | ld2: $& Makefile perlld ${src}/cygwin/ld2.in
|
|---|
| 33 | @echo "extracting ld2 (with variable substitutions)"
|
|---|
| 34 | @$sed s,@buildpath@,$addtopath,g <${src}/cygwin/ld2.in >ld2
|
|---|
| 35 | @chmod a+x ld2
|
|---|
| 36 | @echo "installing ld2 into $installbin"
|
|---|
| 37 | # install is included in Cygwin distributions, and we make a note of th
|
|---|
| 38 | # requirement in the README.cygwin file. However, let's give them
|
|---|
| 39 | # a warning.
|
|---|
| 40 | @/usr/bin/install -c -m 755 ld2 ${installbin}/ld2
|
|---|
| 41 | @if test ! -f ${installbin}/ld2; then \
|
|---|
| 42 | echo "*************************************************" ; \
|
|---|
| 43 | echo "Make will probably fail in a few more steps." ; \
|
|---|
| 44 | echo "When it does, copy \"ld2\" to a directory in" ; \
|
|---|
| 45 | echo "your path, other than \".\"." ; \
|
|---|
| 46 | echo "\"/usr/local/bin\" or something similar will do." ; \
|
|---|
| 47 | echo "Then restart make." ; \
|
|---|
| 48 | echo "*************************************************" ; \
|
|---|
| 49 | fi
|
|---|
| 50 |
|
|---|
| 51 | !GROK!THIS!
|
|---|
| 52 |
|
|---|
| 53 | $spitshell >>Makefile <<!GROK!THIS!
|
|---|
| 54 |
|
|---|
| 55 | # perlld parameters
|
|---|
| 56 | #
|
|---|
| 57 | # these ones are mandatory
|
|---|
| 58 | DLLWRAP = 'dllwrap'
|
|---|
| 59 | VERSION = '$version'
|
|---|
| 60 |
|
|---|
| 61 | # following are optional.
|
|---|
| 62 | WRAPDRIVER = gcc
|
|---|
| 63 | DLLTOOL = dlltool
|
|---|
| 64 | EXPORT_ALL = 1
|
|---|
| 65 |
|
|---|
| 66 | # if some of extensions are empty,
|
|---|
| 67 | # no corresponding output will be done.
|
|---|
| 68 | # most probably, you'd like to have an export library
|
|---|
| 69 | DEF_EXT = .def
|
|---|
| 70 | EXP_EXT = .exp
|
|---|
| 71 |
|
|---|
| 72 | perlld: $& Makefile ${src}/cygwin/perlld.in
|
|---|
| 73 | @echo "extracting perlld (with variable substitutions)"
|
|---|
| 74 | @$sed -e s,@CC@,\${CC}, -e s,@DLLWRAP@,\${DLLWRAP},g \\
|
|---|
| 75 | -e s,@WRAPDRIVER@,\${WRAPDRIVER},g -e s,@DLLTOOL@,\${DLLTOOL},g \\
|
|---|
| 76 | -e s,@AS@,\${AS},g -e s,@EXPORT_ALL@,\${EXPORT_ALL},g \\
|
|---|
| 77 | -e s,@DEF_EXT@,\${DEF_EXT},g -e s,@EXP_EXT@,\${EXP_EXT},g \\
|
|---|
| 78 | -e s,@LIB_EXT@,\${LIB_EXT},g -e s,@VERSION@,\${VERSION},g \\
|
|---|
| 79 | ${src}/cygwin/perlld.in >perlld
|
|---|
| 80 |
|
|---|
| 81 | !GROK!THIS!
|
|---|
| 82 |
|
|---|
| 83 | # make sure that all library names are not malformed
|
|---|
| 84 | libperl=`echo $libperl|sed -e s,\\\..*,,`
|
|---|
| 85 |
|
|---|
| 86 | linklibperl=-l`echo $libperl|sed -e s,^lib,,`
|
|---|
| 87 |
|
|---|
| 88 | $spitshell >>Makefile <<!GROK!THIS!
|
|---|
| 89 | LIBPERL = $libperl
|
|---|
| 90 | LLIBPERL= $linklibperl
|
|---|
| 91 | CLDFLAGS= -L$addtopath $ldflags
|
|---|
| 92 | CAT = $cat
|
|---|
| 93 | AWK = $awk
|
|---|
| 94 | !GROK!THIS!
|
|---|
| 95 |
|
|---|
| 96 | case "$useshrplib" in
|
|---|
| 97 | true)
|
|---|
| 98 | $spitshell >>Makefile <<'!NO!SUBS!'
|
|---|
| 99 | cwobj = $(obj)
|
|---|
| 100 |
|
|---|
| 101 | # override default rule (NB: make croaks!) to force dll usage
|
|---|
| 102 | perlmain$(OBJ_EXT): perlmain.c
|
|---|
| 103 | $(CCCMD) $(PLDLFLAGS) -DUSEIMPORTLIB $*.c
|
|---|
| 104 |
|
|---|
| 105 | # library used to make statically linked executables
|
|---|
| 106 | # miniperl is linked against it to avoid libperl.dll locking
|
|---|
| 107 | $(LIBPERL)$(LIB_EXT): $& perl$(OBJ_EXT) $(cwobj)
|
|---|
| 108 | $(AR) rcu $@ perl$(OBJ_EXT) $(cwobj)
|
|---|
| 109 |
|
|---|
| 110 | # dll and import library
|
|---|
| 111 | $(LIBPERL).dll$(LIB_EXT): $& perl$(OBJ_EXT) $(cwobj) ld2
|
|---|
| 112 | $(LDLIBPTH) ld2 $(SHRPLDFLAGS) -o $(LIBPERL)$(DLSUFFIX) \
|
|---|
| 113 | perl$(OBJ_EXT) $(cwobj) $(libs)
|
|---|
| 114 |
|
|---|
| 115 | # How to build executables.
|
|---|
| 116 |
|
|---|
| 117 | # The miniperl -w -MExporter line is a basic cheap test to catch errors
|
|---|
| 118 | # before make goes on to run preplibrary and then MakeMaker on extensions.
|
|---|
| 119 | # This is very handy because later errors are often caused by miniperl
|
|---|
| 120 | # build problems but that's not obvious to the novice.
|
|---|
| 121 | # The Module used here must not depend on Config or any extensions.
|
|---|
| 122 |
|
|---|
| 123 | miniperl.exe \
|
|---|
| 124 | miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL)$(LIB_EXT) opmini$(OBJ_EXT)
|
|---|
| 125 | $(LDLIBPTH) $(CC) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(LLIBPERL) $(libs)
|
|---|
| 126 | $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
|
|---|
| 127 |
|
|---|
| 128 | perl.exe \
|
|---|
| 129 | perl: $& perlmain$(OBJ_EXT) $(LIBPERL).dll$(LIB_EXT) $(DYNALOADER) $(static_ext) ext.libs
|
|---|
| 130 | $(SHRPENV) $(LDLIBPTH) $(CC) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
|
|---|
| 131 |
|
|---|
| 132 | pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL).dll$(LIB_EXT) $(DYNALOADER) $(static_ext) ext.libs
|
|---|
| 133 | $(SHRPENV) $(LDLIBPTH) purify $(CC) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
|
|---|
| 134 |
|
|---|
| 135 | purecovperl: $& perlmain$(OBJ_EXT) $(LIBPERL).dll$(LIB_EXT) $(DYNALOADER) $(static_ext) ext.libs
|
|---|
| 136 | $(SHRPENV) $(LDLIBPTH) purecov $(CC) $(CLDFLAGS) $(CCDLFLAGS) -o purecovperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
|
|---|
| 137 |
|
|---|
| 138 | quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL).dll$(LIB_EXT) $(DYNALOADER) $(static_ext) ext.libs
|
|---|
| 139 | $(SHRPENV) $(LDLIBPTH) quantify $(CC) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
|
|---|
| 140 |
|
|---|
| 141 | !NO!SUBS!
|
|---|
| 142 | ;;
|
|---|
| 143 | *)
|
|---|
| 144 | $spitshell >>Makefile <<'!NO!SUBS!'
|
|---|
| 145 | cwobj = $(obj)
|
|---|
| 146 |
|
|---|
| 147 | # perl library
|
|---|
| 148 | $(LIBPERL)$(LIB_EXT): $& perl$(OBJ_EXT) $(cwobj)
|
|---|
| 149 | $(AR) rcu $@ perl$(OBJ_EXT) $(cwobj)
|
|---|
| 150 |
|
|---|
| 151 | # How to build executables.
|
|---|
| 152 |
|
|---|
| 153 | # The miniperl -w -MExporter line is a basic cheap test to catch errors
|
|---|
| 154 | # before make goes on to run preplibrary and then MakeMaker on extensions.
|
|---|
| 155 | # This is very handy because later errors are often caused by miniperl
|
|---|
| 156 | # build problems but that's not obvious to the novice.
|
|---|
| 157 | # The Module used here must not depend on Config or any extensions.
|
|---|
| 158 |
|
|---|
| 159 | miniperl.exe \
|
|---|
| 160 | miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL)$(LIB_EXT) opmini$(OBJ_EXT)
|
|---|
| 161 | $(LDLIBPTH) $(CC) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(LLIBPERL) $(libs)
|
|---|
| 162 | $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
|
|---|
| 163 |
|
|---|
| 164 | perl.exe \
|
|---|
| 165 | perl: $& perlmain$(OBJ_EXT) $(LIBPERL)$(LIB_EXT) $(DYNALOADER) $(static_ext) ext.libs
|
|---|
| 166 | $(SHRPENV) $(LDLIBPTH) $(CC) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) -Wl,-Bstatic $(LLIBPERL) -Wl,-Bdynamic `cat ext.libs` $(libs)
|
|---|
| 167 |
|
|---|
| 168 | pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL)$(LIB_EXT) $(DYNALOADER) $(static_ext) ext.libs
|
|---|
| 169 | $(SHRPENV) $(LDLIBPTH) purify $(CC) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
|
|---|
| 170 |
|
|---|
| 171 | purecovperl: $& perlmain$(OBJ_EXT) $(LIBPERL)$(LIB_EXT) $(DYNALOADER) $(static_ext) ext.libs
|
|---|
| 172 | $(SHRPENV) $(LDLIBPTH) purecov $(CC) $(CLDFLAGS) $(CCDLFLAGS) -o purecovperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
|
|---|
| 173 |
|
|---|
| 174 | quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL)$(LIB_EXT) $(DYNALOADER) $(static_ext) ext.libs
|
|---|
| 175 | $(SHRPENV) $(LDLIBPTH) quantify $(CC) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
|
|---|
| 176 |
|
|---|
| 177 | !NO!SUBS!
|
|---|
| 178 | ;;
|
|---|
| 179 | esac
|
|---|
| 180 |
|
|---|
| 181 | # libperl.a is _the_ library both in dll and static cases
|
|---|
| 182 | # $(LIBPERL)$(LIB_EXT) expands to this name dependless of build model
|
|---|
| 183 | #
|
|---|
| 184 | # NOTE: The "-Wl,-Bstatic $(LLIBPERL) -Wl,-Bdynamic" is required to give
|
|---|
| 185 | # the import library linking priority over the dynamic library, since both
|
|---|
| 186 | # the .dll and .a are in the same directory. When the new standard for
|
|---|
| 187 | # naming import/dynamic/static libraries emerges this should be updated.
|
|---|
| 188 | #
|
|---|
| 189 | $spitshell >>Makefile <<'!NO!SUBS!'
|
|---|
| 190 |
|
|---|
| 191 |
|
|---|
| 192 | !NO!SUBS!
|
|---|
| 193 |
|
|---|
| 194 | # suid perl is removed - i've never seen suid scripts for win32
|
|---|
| 195 |
|
|---|
| 196 | ##############################################
|
|---|
| 197 | # additional targets
|
|---|
| 198 |
|
|---|
| 199 | $spitshell >>Makefile <<'!NO!SUBS!'
|
|---|
| 200 |
|
|---|
| 201 | DIST_DIRECTORY = .dist
|
|---|
| 202 |
|
|---|
| 203 | distdir: miniperl
|
|---|
| 204 | -mkdir $(DIST_DIRECTORY)
|
|---|
| 205 | ./miniperl '-MExtUtils::Manifest' \
|
|---|
| 206 | -e "ExtUtils::Manifest::manicopy(ExtUtils::Manifest::maniread(),'$(DIST_DIRECTORY)')"
|
|---|
| 207 |
|
|---|
| 208 | !NO!SUBS!
|
|---|
